| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 25 Apr 2019 01:17:19 +0800
From: Weifeng Voon <weifeng.voon@...el.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Ong Boon Leong <boon.leong.ong@...el.com>,
Kweh Hock Leong <hock.leong.kweh@...el.com>,
Weifeng Voon <weifeng.voon@...el.com>
Subject: [PATCH 5/7] net: stmmac: add xpcs function hooks into main driver and ethtool
From: Ong Boon Leong <boon.leong.ong@...el.com>
With xPCS functions now ready, we add them into the main driver and
ethtool logics. To differentiate from EQoS MAC PCS and DWC Ethernet
xPCS, we introduce 'has_xpcs' in platform data as a mean to indicate
whether GBE controller includes xPCS or not.
To support platform-specific C37 AN PCS mode selection for MII MMD,
we introduce 'pcs_mode' in platform data.
The basic framework for xPCS interrupt handling is implemented too.
Reviewed-by: Chuah Kim Tatt <kim.tatt.chuah@...el.com>
Reviewed-by: Voon Weifeng <weifeng.voon@...el.com>
Reviewed-by: Kweh Hock Leong <hock.leong.kweh@...el.com>
Reviewed-by: Baoli Zhang <baoli.zhang@...el.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@...el.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 +
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 14 ++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 50 ++++++++++++++++++++++
include/linux/stmmac.h | 2 +
4 files changed, 68 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index dd95d95..0b8460a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -36,6 +36,7 @@ struct stmmac_resources {
const char *mac;
int wol_irq;
int lpi_irq;
+ int xpcs_irq;
int irq;
};
@@ -168,6 +169,7 @@ struct stmmac_priv {
int clk_csr;
struct timer_list eee_ctrl_timer;
int lpi_irq;
+ int xpcs_irq;
int eee_enabled;
int eee_active;
int tx_lpi_timer;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 3c749c3..0c146b3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -392,6 +392,10 @@ static int stmmac_ethtool_get_link_ksettings(struct net_device *dev,
mutex_lock(&priv->lock);
stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, priv->hw->ps, 0);
+
+ if (priv->plat->has_xpcs)
+ stmmac_xpcs_ctrl_ane(priv, dev, 1, 0);
+
mutex_unlock(&priv->lock);
return 0;
@@ -457,6 +461,11 @@ static void stmmac_ethtool_gregs(struct net_device *dev,
pause->autoneg = 1;
if (!adv_lp.pause)
return;
+ } else if (priv->plat->has_xpcs &&
+ !stmmac_xpcs_get_adv_lp(priv, netdev, &adv_lp)) {
+ pause->autoneg = 1;
+ if (!adv_lp.pause)
+ return;
} else {
if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
netdev->phydev->supported) ||
@@ -488,6 +497,11 @@ static void stmmac_ethtool_gregs(struct net_device *dev,
pause->autoneg = 1;
if (!adv_lp.pause)
return -EOPNOTSUPP;
+ } else if (priv->plat->has_xpcs &&
+ !stmmac_xpcs_get_adv_lp(priv, netdev, &adv_lp)) {
+ pause->autoneg = 1;
+ if (!adv_lp.pause)
+ return -EOPNOTSUPP;
} else {
if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
phy->supported) ||
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ec031e3..d6e315f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -112,6 +112,7 @@
MODULE_PARM_DESC(chain_mode, "To use chain instead of ring mode");
static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
+static irqreturn_t xpcs_interrupt(int irq, void *dev_id);
#ifdef CONFIG_DEBUG_FS
static int stmmac_init_fs(struct net_device *dev);
@@ -2538,6 +2539,10 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
/* Initialize MTL*/
stmmac_mtl_configuration(priv);
+ /* Initialize the xPCS PHY */
+ if (priv->plat->has_xpcs)
+ stmmac_xpcs_init(priv, dev, priv->plat->pcs_mode);
+
/* Initialize Safety Features */
stmmac_safety_feat_configuration(priv);
@@ -2579,6 +2584,9 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
if (priv->hw->pcs)
stmmac_pcs_ctrl_ane(priv, priv->hw, 1, priv->hw->ps, 0);
+ if (priv->plat->has_xpcs)
+ stmmac_xpcs_ctrl_ane(priv, dev, 1, 0);
+
/* set TX and RX rings length */
stmmac_set_rings_length(priv);
@@ -2696,11 +2704,27 @@ static int stmmac_open(struct net_device *dev)
}
}
+ /* xPCS IRQ line */
+ if (priv->xpcs_irq > 0) {
+ ret = request_irq(priv->xpcs_irq, xpcs_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (unlikely(ret < 0)) {
+ netdev_err(priv->dev,
+ "%s: ERROR: allocating the xPCS IRQ %d (%d)\n",
+ __func__, priv->xpcs_irq, ret);
+ goto xpcsirq_error;
+ }
+ }
+
stmmac_enable_all_queues(priv);
stmmac_start_all_queues(priv);
return 0;
+xpcsirq_error:
+ if (priv->lpi_irq > 0)
+ free_irq(priv->lpi_irq, dev);
+
lpiirq_error:
if (priv->wol_irq != dev->irq)
free_irq(priv->wol_irq, dev);
@@ -3774,6 +3798,31 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
+/**
+ * xPCS_interrupt - xPCS ISR
+ * @irq: interrupt number.
+ * @dev_id: to pass the net device pointer.
+ * Description: this is the xPCS interrupt service routine.
+ */
+static irqreturn_t xpcs_interrupt(int irq, void *dev_id)
+{
+ irqreturn_t ret = IRQ_NONE;
+ struct net_device *ndev = (struct net_device *)dev_id;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+
+ if (unlikely(!ndev)) {
+ netdev_err(priv->dev, "%s: invalid dev pointer\n",
+ __func__);
+ return ret;
+ }
+
+ /* To handle xPCS interrupts */
+ if (priv->plat->has_xpcs)
+ ret = stmmac_xpcs_irq_status(priv, ndev, &priv->xstats);
+
+ return ret;
+}
+
#ifdef CONFIG_NET_POLL_CONTROLLER
/* Polling receive - used by NETCONSOLE and other diagnostic tools
* to allow network I/O with interrupts disabled.
@@ -4263,6 +4312,7 @@ int stmmac_dvr_probe(struct device *device,
priv->dev->irq = res->irq;
priv->wol_irq = res->wol_irq;
priv->lpi_irq = res->lpi_irq;
+ priv->xpcs_irq = res->xpcs_irq;
if (res->mac)
memcpy(priv->dev->dev_addr, res->mac, ETH_ALEN);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index b00e795..2adb78c 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -189,6 +189,8 @@ struct plat_stmmacenet_data {
struct reset_control *stmmac_rst;
struct stmmac_axi *axi;
int has_gmac4;
+ int has_xpcs;
+ int pcs_mode;
bool has_sun8i;
bool tso_en;
int mac_port_sel_speed;
--
1.9.1
Powered by blists - more mailing lists