lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Date:   Fri, 26 Apr 2019 10:41:28 +0100 (BST)
From:   Mark Brown <broonie@...nel.org>
To:     Axel Lin <axel.lin@...ics.com>
Cc:     linux-kernel@...r.kernel.org, Mark Brown <broonie@...nel.org>
Subject: Applied "regulator: mcp16502: Remove setup_regulators function" to the regulator tree

The patch

   regulator: mcp16502: Remove setup_regulators function

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 784c24c3e45cc665226e8529d79f319af7cfd09c Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@...ics.com>
Date: Thu, 11 Apr 2019 09:59:23 +0800
Subject: [PATCH] regulator: mcp16502: Remove setup_regulators function

It seems a little bit odd current code pass struct regulator_config rather
than a pointer to setup_regulators. The setup_regulators is so simple and
only has one caller, so remove it.

Signed-off-by: Axel Lin <axel.lin@...ics.com>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
 drivers/regulator/mcp16502.c | 37 +++++++++++-------------------------
 1 file changed, 11 insertions(+), 26 deletions(-)

diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
index 9292ab8736c7..e5a02711cb46 100644
--- a/drivers/regulator/mcp16502.c
+++ b/drivers/regulator/mcp16502.c
@@ -427,36 +427,15 @@ static const struct regmap_config mcp16502_regmap_config = {
 	.wr_table	= &mcp16502_yes_reg_table,
 };
 
-/*
- * set_up_regulators() - initialize all regulators
- */
-static int setup_regulators(struct mcp16502 *mcp, struct device *dev,
-			    struct regulator_config config)
-{
-	struct regulator_dev *rdev;
-	int i;
-
-	for (i = 0; i < NUM_REGULATORS; i++) {
-		rdev = devm_regulator_register(dev, &mcp16502_desc[i], &config);
-		if (IS_ERR(rdev)) {
-			dev_err(dev,
-				"failed to register %s regulator %ld\n",
-				mcp16502_desc[i].name, PTR_ERR(rdev));
-			return PTR_ERR(rdev);
-		}
-	}
-
-	return 0;
-}
-
 static int mcp16502_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
 	struct regulator_config config = { };
+	struct regulator_dev *rdev;
 	struct device *dev;
 	struct mcp16502 *mcp;
 	struct regmap *rmap;
-	int ret = 0;
+	int i, ret;
 
 	dev = &client->dev;
 	config.dev = dev;
@@ -482,9 +461,15 @@ static int mcp16502_probe(struct i2c_client *client,
 		return PTR_ERR(mcp->lpm);
 	}
 
-	ret = setup_regulators(mcp, dev, config);
-	if (ret != 0)
-		return ret;
+	for (i = 0; i < NUM_REGULATORS; i++) {
+		rdev = devm_regulator_register(dev, &mcp16502_desc[i], &config);
+		if (IS_ERR(rdev)) {
+			dev_err(dev,
+				"failed to register %s regulator %ld\n",
+				mcp16502_desc[i].name, PTR_ERR(rdev));
+			return PTR_ERR(rdev);
+		}
+	}
 
 	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);
 
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ