[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190426142914.45adfdae@jawa>
Date: Fri, 26 Apr 2019 14:29:14 +0200
From: Lukasz Majewski <lukma@...x.de>
To: Daniel Vetter <daniel@...ll.ch>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Thierry Reding <thierry.reding@...il.com>,
David Airlie <airlied@...ux.ie>
Cc: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/2] dt-bindings: display/panel: Add KOE
tx14d24vm1bpa display description
Dear All,
> This commit adds documentation entry description for KOE's 5.7"
> display.
>
> Signed-off-by: Lukasz Majewski <lukma@...x.de>
>
> ---
> Previous discussion (and Rob's Reviewed-by) about this patch
> https://patchwork.kernel.org/patch/10339595/
>
> Changes for v3 :
> - New patch
Gentle ping on this patch...
> ---
> .../bindings/display/panel/koe,tx14d24vm1bpa.txt | 42
> ++++++++++++++++++++++ 1 file changed, 42 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt
>
> diff --git
> a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt
> b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt
> new file mode 100644 index 000000000000..be7ac666807b --- /dev/null
> +++
> b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt
> @@ -0,0 +1,42 @@ +Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x
> 240) TFT LCD panel +
> +Required properties:
> +- compatible: should be "koe,tx14d24vm1bpa"
> +- backlight: phandle of the backlight device attached to the panel
> +- power-supply: single regulator to provide the supply voltage
> +
> +Required nodes:
> +- port: Parallel port mapping to connect this display
> +
> +This panel needs single power supply voltage. Its backlight is
> conntrolled +via PWM signal.
> +
> +Example:
> +--------
> +
> +Example device-tree definition when connected to iMX53 based board
> +
> + lcd_panel: lcd-panel {
> + compatible = "koe,tx14d24vm1bpa";
> + backlight = <&backlight_lcd>;
> + power-supply = <®_3v3>;
> +
> + port {
> + lcd_panel_in: endpoint {
> + remote-endpoint = <&lcd_display_out>;
> + };
> + };
> + };
> +
> +Then one needs to extend the dispX node:
> +
> + lcd_display: disp1 {
> +
> + port@1 {
> + reg = <1>;
> +
> + lcd_display_out: endpoint {
> + remote-endpoint = <&lcd_panel_in>;
> + };
> + };
> + };
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@...x.de
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists