| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190426131640.GD16228@ulmo>
Date: Fri, 26 Apr 2019 15:16:40 +0200
From: Thierry Reding <thierry.reding@...il.com>
To: Krishna Yarlagadda <kyarlagadda@...dia.com>
Cc: linus.walleij@...aro.org, jonathanh@...dia.com,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-tegra@...r.kernel.org, devicetree@...r.kernel.org,
pdeschrijver@...dia.com, josephl@...dia.com, smangipudi@...dia.com,
ldewangan@...dia.com, vidyas@...dia.com
Subject: Re: [PATCH 2/2] pinctrl: tegra: Add Tegra194 pinmux driver
On Fri, Apr 26, 2019 at 08:26:18AM +0530, Krishna Yarlagadda wrote:
> Tegra194 has PCIE L5 rst and clkreq pins which need to be controlled
> dynamically at runtime. This driver supports change pinmux for these
> pins. Pinmux for rest of the pins is set statically by bootloader and
> will not be changed by this driver
>
> Signed-off-by: Krishna Yarlagadda <kyarlagadda@...dia.com>
> Signed-off-by: Suresh Mangipudi <smangipudi@...dia.com>
> ---
> drivers/pinctrl/tegra/Kconfig | 4 +
> drivers/pinctrl/tegra/Makefile | 1 +
> drivers/pinctrl/tegra/pinctrl-tegra.c | 8 +-
> drivers/pinctrl/tegra/pinctrl-tegra.h | 8 +-
> drivers/pinctrl/tegra/pinctrl-tegra194.c | 175 +++++++++++++++++++++++++++++++
> drivers/soc/tegra/Kconfig | 1 +
> 6 files changed, 189 insertions(+), 8 deletions(-)
> create mode 100644 drivers/pinctrl/tegra/pinctrl-tegra194.c
>
> diff --git a/drivers/pinctrl/tegra/Kconfig b/drivers/pinctrl/tegra/Kconfig
> index 24e20cc..6f79f1f 100644
> --- a/drivers/pinctrl/tegra/Kconfig
> +++ b/drivers/pinctrl/tegra/Kconfig
> @@ -23,6 +23,10 @@ config PINCTRL_TEGRA210
> bool
> select PINCTRL_TEGRA
>
> +config PINCTRL_TEGRA194
> + bool
> + select PINCTRL_TEGRA
> +
> config PINCTRL_TEGRA_XUSB
> def_bool y if ARCH_TEGRA
> select GENERIC_PHY
> diff --git a/drivers/pinctrl/tegra/Makefile b/drivers/pinctrl/tegra/Makefile
> index bbcb043..ead4e10 100644
> --- a/drivers/pinctrl/tegra/Makefile
> +++ b/drivers/pinctrl/tegra/Makefile
> @@ -5,4 +5,5 @@ obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o
> obj-$(CONFIG_PINCTRL_TEGRA114) += pinctrl-tegra114.o
> obj-$(CONFIG_PINCTRL_TEGRA124) += pinctrl-tegra124.o
> obj-$(CONFIG_PINCTRL_TEGRA210) += pinctrl-tegra210.o
> +obj-$(CONFIG_PINCTRL_TEGRA194) += pinctrl-tegra194.o
> obj-$(CONFIG_PINCTRL_TEGRA_XUSB) += pinctrl-tegra-xusb.o
> diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c
> index a5008c0..76e88c4 100644
> --- a/drivers/pinctrl/tegra/pinctrl-tegra.c
> +++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
> @@ -292,7 +292,7 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx,
> const struct tegra_pingroup *g,
> enum tegra_pinconf_param param,
> bool report_err,
> - s8 *bank, s16 *reg, s8 *bit, s8 *width)
> + s8 *bank, s32 *reg, s8 *bit, s8 *width)
> {
> switch (param) {
> case TEGRA_PINCONF_PARAM_PULL:
> @@ -451,7 +451,7 @@ static int tegra_pinconf_group_get(struct pinctrl_dev *pctldev,
> const struct tegra_pingroup *g;
> int ret;
> s8 bank, bit, width;
> - s16 reg;
> + s32 reg;
> u32 val, mask;
>
> g = &pmx->soc->groups[group];
> @@ -480,7 +480,7 @@ static int tegra_pinconf_group_set(struct pinctrl_dev *pctldev,
> const struct tegra_pingroup *g;
> int ret, i;
> s8 bank, bit, width;
> - s16 reg;
> + s32 reg;
> u32 val, mask;
>
> g = &pmx->soc->groups[group];
> @@ -548,7 +548,7 @@ static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
> const struct tegra_pingroup *g;
> int i, ret;
> s8 bank, bit, width;
> - s16 reg;
> + s32 reg;
> u32 val;
>
> g = &pmx->soc->groups[group];
> diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.h b/drivers/pinctrl/tegra/pinctrl-tegra.h
> index 44c7194..82cd947 100644
> --- a/drivers/pinctrl/tegra/pinctrl-tegra.h
> +++ b/drivers/pinctrl/tegra/pinctrl-tegra.h
> @@ -143,10 +143,10 @@ struct tegra_pingroup {
> const unsigned *pins;
> u8 npins;
> u8 funcs[4];
> - s16 mux_reg;
> - s16 pupd_reg;
> - s16 tri_reg;
> - s16 drv_reg;
> + s32 mux_reg;
> + s32 pupd_reg;
> + s32 tri_reg;
> + s32 drv_reg;
> u32 mux_bank:2;
> u32 pupd_bank:2;
> u32 tri_bank:2;
I think the above should go into a separate, preparatory patch that
explains in the commit message why this change is necessary.
> diff --git a/drivers/pinctrl/tegra/pinctrl-tegra194.c b/drivers/pinctrl/tegra/pinctrl-tegra194.c
> new file mode 100644
> index 0000000..9172a8c
> --- /dev/null
> +++ b/drivers/pinctrl/tegra/pinctrl-tegra194.c
> @@ -0,0 +1,175 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Pinctrl data for the NVIDIA Tegra210 pinmux
You probably meant to say Tegra194 here.
> + *
> + * Copyright (c) 2019, NVIDIA CORPORATION. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +
> +#include "pinctrl-tegra.h"
> +
> +#define _GPIO(offset) (offset)
This is rather pointless.
> +#define NUM_GPIOS (TEGRA_PIN_PEX_L5_RST_N_PGG1 + 1)
Perhaps make this part of the enum pin_id enum below so that it doesn't
look out of place?
> +
> +/* Define unique ID for each pins */
> +enum pin_id {
> + TEGRA_PIN_PEX_L5_CLKREQ_N_PGG0 = _GPIO(256),
> + TEGRA_PIN_PEX_L5_RST_N_PGG1 = _GPIO(257),
> +};
> +
> +/* Table for pin descriptor */
> +static const struct pinctrl_pin_desc tegra194_pins[] = {
> + PINCTRL_PIN(TEGRA_PIN_PEX_L5_CLKREQ_N_PGG0,
> + "TEGRA_PIN_PEX_L5_CLKREQ_N_PGG0"),
> + PINCTRL_PIN(TEGRA_PIN_PEX_L5_RST_N_PGG1,
> + "TEGRA_PIN_PEX_L5_RST_N_PGG1"),
> +};
> +
> +static const unsigned int pex_l5_clkreq_n_pgg0_pins[] = {
> + TEGRA_PIN_PEX_L5_CLKREQ_N_PGG0,
> +};
> +
> +static const unsigned int pex_l5_rst_n_pgg1_pins[] = {
> + TEGRA_PIN_PEX_L5_RST_N_PGG1,
> +};
> +
> +/* Define unique ID for each function */
> +enum tegra_mux_dt {
> + TEGRA_MUX_RSVD0,
> + TEGRA_MUX_RSVD1,
> + TEGRA_MUX_RSVD2,
> + TEGRA_MUX_RSVD3,
> + TEGRA_MUX_PE5,
> +};
> +
> +/* Make list of each function name */
> +#define TEGRA_PIN_FUNCTION(lid) \
> + { \
> + .name = #lid, \
> + }
> +static struct tegra_function tegra194_functions[] = {
> + TEGRA_PIN_FUNCTION(rsvd0),
> + TEGRA_PIN_FUNCTION(rsvd1),
> + TEGRA_PIN_FUNCTION(rsvd2),
> + TEGRA_PIN_FUNCTION(rsvd3),
> + TEGRA_PIN_FUNCTION(pe5),
> +};
> +
> +#define PINGROUP_REG_Y(r) ((r))
> +#define DRV_PINGROUP_Y(r) ((r))
Again, why do we need this?
> +
> +#define DRV_PINGROUP_ENTRY_Y(r, drvdn_b, drvdn_w, drvup_b, \
> + drvup_w, slwr_b, slwr_w, slwf_b, \
> + slwf_w, bank) \
> + .drv_reg = DRV_PINGROUP_Y(r), \
> + .drv_bank = bank, \
> + .drvdn_bit = drvdn_b, \
> + .drvdn_width = drvdn_w, \
> + .drvup_bit = drvup_b, \
> + .drvup_width = drvup_w, \
> + .slwr_bit = slwr_b, \
> + .slwr_width = slwr_w, \
> + .slwf_bit = slwf_b, \
> + .slwf_width = slwf_w
> +
> +#define PIN_PINGROUP_ENTRY_Y(r, bank, pupd, e_lpbk, e_input, \
> + e_od, schmitt_b, drvtype) \
> + .mux_reg = PINGROUP_REG_Y(r), \
> + .lpmd_bit = -1, \
> + .lock_bit = -1, \
> + .hsm_bit = -1, \
> + .parked_bit = -1, \
> + .mux_bank = bank, \
> + .mux_bit = 0, \
> + .pupd_reg = PINGROUP_REG_##pupd(r), \
> + .pupd_bank = bank, \
> + .pupd_bit = 2, \
> + .tri_reg = PINGROUP_REG_Y(r), \
> + .tri_bank = bank, \
> + .tri_bit = 4, \
> + .einput_bit = e_input, \
> + .odrain_bit = e_od, \
> + .schmitt_bit = schmitt_b, \
> + .drvtype_bit = 13, \
> + .drv_reg = -1
> +
> +#define drive_pex_l5_clkreq_n_pgg0 \
> + DRV_PINGROUP_ENTRY_Y(0x14004, 12, 5, 20, 5, -1, -1, -1, -1, 0)
> +#define drive_pex_l5_rst_n_pgg1 \
> + DRV_PINGROUP_ENTRY_Y(0x1400c, 12, 5, 20, 5, -1, -1, -1, -1, 0)
> +
> +#define PINGROUP(pg_name, f0, f1, f2, f3, r, bank, pupd, e_lpbk, \
> + e_input, e_lpdr, e_od, schmitt_b, drvtype, io_rail) \
> + { \
> + .name = #pg_name, \
> + .pins = pg_name##_pins, \
> + .npins = ARRAY_SIZE(pg_name##_pins), \
> + .funcs = { \
> + TEGRA_MUX_##f0, \
> + TEGRA_MUX_##f1, \
> + TEGRA_MUX_##f2, \
> + TEGRA_MUX_##f3, \
> + }, \
> + PIN_PINGROUP_ENTRY_Y(r, bank, pupd, e_lpbk, \
> + e_input, e_od, \
> + schmitt_b, drvtype), \
> + drive_##pg_name, \
> + }
> +
> +static const struct tegra_pingroup tegra194_groups[] = {
> + PINGROUP(pex_l5_clkreq_n_pgg0, PE5, RSVD1, RSVD2, RSVD3, 0x14000, 0,
> + Y, -1, 6, 8, 11, 12, N, "vddio_pex_ctl_2"),
> + PINGROUP(pex_l5_rst_n_pgg1, PE5, RSVD1, RSVD2, RSVD3, 0x14008, 0,
> + Y, -1, 6, 8, 11, 12, N, "vddio_pex_ctl_2"),
> +};
> +
> +static const struct tegra_pinctrl_soc_data tegra194_pinctrl = {
> + .ngpios = NUM_GPIOS,
> + .pins = tegra194_pins,
> + .npins = ARRAY_SIZE(tegra194_pins),
> + .functions = tegra194_functions,
> + .nfunctions = ARRAY_SIZE(tegra194_functions),
> + .groups = tegra194_groups,
> + .ngroups = ARRAY_SIZE(tegra194_groups),
> + .hsm_in_mux = true,
> + .schmitt_in_mux = true,
> + .drvtype_in_mux = true,
> +};
> +
> +static int tegra194_pinctrl_probe(struct platform_device *pdev)
> +{
> + return tegra_pinctrl_probe(pdev, &tegra194_pinctrl);
> +}
> +
> +static const struct of_device_id tegra194_pinctrl_of_match[] = {
> + { .compatible = "nvidia,tegra194-pinmux", },
> + { },
> +};
> +
> +static struct platform_driver tegra194_pinctrl_driver = {
> + .driver = {
> + .name = "tegra194-pinctrl",
> + .of_match_table = tegra194_pinctrl_of_match,
> + },
> + .probe = tegra194_pinctrl_probe,
> +};
> +
> +static int __init tegra194_pinctrl_init(void)
> +{
> + return platform_driver_register(&tegra194_pinctrl_driver);
> +}
> +arch_initcall(tegra194_pinctrl_init);
> diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig
> index a0b0344..b6d3a2e 100644
> --- a/drivers/soc/tegra/Kconfig
> +++ b/drivers/soc/tegra/Kconfig
> @@ -107,6 +107,7 @@ config ARCH_TEGRA_186_SOC
>
> config ARCH_TEGRA_194_SOC
> bool "NVIDIA Tegra194 SoC"
> + select PINCTRL_TEGRA194
> select MAILBOX
> select TEGRA_BPMP
> select TEGRA_HSP_MBOX
This should be a separate patch. Also, make sure the select entries are
sorted alphabetically.
Thierry
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists