[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1556247378-3335-1-git-send-email-kyarlagadda@nvidia.com>
Date: Fri, 26 Apr 2019 08:26:17 +0530
From: Krishna Yarlagadda <kyarlagadda@...dia.com>
To: <linus.walleij@...aro.org>, <thierry.reding@...il.com>,
<jonathanh@...dia.com>, <linux-kernel@...r.kernel.org>,
<linux-gpio@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
<devicetree@...r.kernel.org>
CC: <pdeschrijver@...dia.com>, <josephl@...dia.com>,
<smangipudi@...dia.com>, <ldewangan@...dia.com>,
<vidyas@...dia.com>, Krishna Yarlagadda <kyarlagadda@...dia.com>
Subject: [PATCH 1/2] dt-binding: Tegra194 pinctrl support
Add new compatible string and other fields used in pinctrl
driver for Tegra194 in nvidia,tegra210-pinmux.txt
Signed-off-by: Krishna Yarlagadda <kyarlagadda@...dia.com>
---
.../bindings/pinctrl/nvidia,tegra210-pinmux.txt | 43 +++++++++++++++++++---
1 file changed, 38 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
index 85f2114..c4e802d 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
@@ -1,7 +1,7 @@
-NVIDIA Tegra210 pinmux controller
+NVIDIA Tegra210/194 pinmux controller
Required properties:
-- compatible: "nvidia,tegra210-pinmux"
+- compatible: "nvidia,tegra210-pinmux" or "nvidia,tegra194-pinmux"
- reg: Should contain a list of base address and size pairs for:
- first entry: The APB_MISC_GP_*_PADCTRL registers (pad control)
- second entry: The PINMUX_AUX_* registers (pinmux)
@@ -83,6 +83,10 @@ Valid values for pin and group names (nvidia,pin) are:
These correspond to Tegra PINMUX_AUX_* (pinmux) registers. Any property
that exists in those registers may be set for the following pin names.
+ Tegra194:
+ pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1
+
+ Tegra210:
In Tegra210, many pins also have a dedicated APB_MISC_GP_*_PADCTRL
register. Where that is true, and property that exists in that register
may also be set on the following pin names.
@@ -127,12 +131,15 @@ Valid values for pin and group names (nvidia,pin) are:
registers. Note that where one of these registers controls a single pin
for which a PINMUX_AUX_* exists, see the list above for the pin name to
use when configuring the pinmux.
-
+ Tegra210:
pa6, pcc7, pe6, pe7, ph6, pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1,
pz0, pz1, pz2, pz3, pz4, pz5, sdmmc1, sdmmc2, sdmmc3, sdmmc4
+ Tegra194:
+ pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1
Valid values for nvidia,functions are:
+ Tegra210:
aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, displayb,
dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, i2c2, i2c3, i2cpmu, i2cvi,
i2s1, i2s2, i2s3, i2s4a, i2s4b, i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0,
@@ -140,9 +147,12 @@ Valid values for nvidia,functions are:
sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, spi3, spi4,
sys, touch, uart, uarta, uartb, uartc, uartd, usb, vgp1, vgp2, vgp3, vgp4,
vgp5, vgp6, vimclk, vimclk2
+ Tegra194:
+ pe5
-Example:
+Examples:
+ Tegra210:
pinmux: pinmux@...00800 {
compatible = "nvidia,tegra210-pinmux";
reg = <0x0 0x700008d4 0x0 0x2a8>, /* Pad control registers */
@@ -163,4 +173,27 @@ Example:
};
};
};
-};
+
+ Tegra194:
+ tegra_pinctrl: pinmux: pinmux@...0000 {
+ compatible = "nvidia,tegra194-pinmux";
+ reg = <0x2430000 0x17000
+ 0xc300000 0x4000>;
+ #gpio-range-cells = <2>;
+ pex_rst_c5_out_state: pex_rst_c5_out {
+ pex_rst {
+ nvidia,pins = "pex_l5_rst_n_pgg1";
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,lpdr = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ };
+ };
+ };
+ pinmuxtest@0 {
+ compatible = "nvidia,tegra194-pinmux-test";
+ pinctrl-names = "pex_rst";
+ pinctrl-0 = <&pex_rst_c5_out_state>;
+ };
--
2.7.4
Powered by blists - more mailing lists