| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <ea0424b536faaa30afdd796d85b5cc949d574900.1556365459.git.mail@maciej.szmigiero.name>
Date: Sat, 27 Apr 2019 16:50:28 +0200
From: "Maciej S. Szmigiero" <mail@...iej.szmigiero.name>
To: Michael Krufky <mkrufky@...uxtv.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>
Cc: Andy Walls <awalls@...metrocast.net>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-media@...r.kernel.org, Hans Verkuil <hverkuil@...all.nl>
Subject: [PATCH v11 1/7] cx25840: don't open-code cx25840_reset() inside cx25840_load_fw()
cx25840_load_fw() does the same thing as cx25840_reset(), only keeps
"is_initialized" flag so any further invocation of this function besides
the first one is a NOP.
Let's just call cx25840_reset() directly from cx25840_load_fw() instead of
open coding it there.
While we are at it, let's also improve comments about cx25840_load_fw()
so they are current and in the proper style (one of them even referred to a
non-existing cx25840 init operation).
Signed-off-by: Maciej S. Szmigiero <mail@...iej.szmigiero.name>
---
drivers/media/i2c/cx25840/cx25840-core.c | 70 ++++++++++++------------
include/media/drv-intf/cx25840.h | 28 ++++++----
2 files changed, 51 insertions(+), 47 deletions(-)
diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c
index 8b0b8b5aa531..0bf30222cf93 100644
--- a/drivers/media/i2c/cx25840/cx25840-core.c
+++ b/drivers/media/i2c/cx25840/cx25840-core.c
@@ -1649,32 +1649,46 @@ static void log_audio_status(struct i2c_client *client)
/* ----------------------------------------------------------------------- */
-/* This load_fw operation must be called to load the driver's firmware.
- Without this the audio standard detection will fail and you will
- only get mono.
-
- Since loading the firmware is often problematic when the driver is
- compiled into the kernel I recommend postponing calling this function
- until the first open of the video device. Another reason for
- postponing it is that loading this firmware takes a long time (seconds)
- due to the slow i2c bus speed. So it will speed up the boot process if
- you can avoid loading the fw as long as the video device isn't used. */
-static int cx25840_load_fw(struct v4l2_subdev *sd)
+static int cx25840_reset(struct v4l2_subdev *sd, u32 val)
{
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
+ if (is_cx2583x(state))
+ cx25836_initialize(client);
+ else if (is_cx2388x(state))
+ cx23885_initialize(client);
+ else if (is_cx231xx(state))
+ cx231xx_initialize(client);
+ else
+ cx25840_initialize(client);
+
+ state->is_initialized = 1;
+
+ return 0;
+}
+
+/*
+ * This load_fw operation must be called to load the driver's firmware.
+ * This will load the firmware on the first invocation (further ones are NOP).
+ * Without this the audio standard detection will fail and you will
+ * only get mono.
+ * Alternatively, you can call the reset operation instead of this one.
+ *
+ * Since loading the firmware is often problematic when the driver is
+ * compiled into the kernel I recommend postponing calling this function
+ * until the first open of the video device. Another reason for
+ * postponing it is that loading this firmware takes a long time (seconds)
+ * due to the slow i2c bus speed. So it will speed up the boot process if
+ * you can avoid loading the fw as long as the video device isn't used.
+ */
+static int cx25840_load_fw(struct v4l2_subdev *sd)
+{
+ struct cx25840_state *state = to_state(sd);
+
if (!state->is_initialized) {
/* initialize and load firmware */
- state->is_initialized = 1;
- if (is_cx2583x(state))
- cx25836_initialize(client);
- else if (is_cx2388x(state))
- cx23885_initialize(client);
- else if (is_cx231xx(state))
- cx231xx_initialize(client);
- else
- cx25840_initialize(client);
+ cx25840_reset(sd, 0);
}
return 0;
}
@@ -1937,22 +1951,6 @@ static int cx25840_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt)
return 0;
}
-static int cx25840_reset(struct v4l2_subdev *sd, u32 val)
-{
- struct cx25840_state *state = to_state(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- if (is_cx2583x(state))
- cx25836_initialize(client);
- else if (is_cx2388x(state))
- cx23885_initialize(client);
- else if (is_cx231xx(state))
- cx231xx_initialize(client);
- else
- cx25840_initialize(client);
- return 0;
-}
-
static int cx25840_log_status(struct v4l2_subdev *sd)
{
struct cx25840_state *state = to_state(sd);
diff --git a/include/media/drv-intf/cx25840.h b/include/media/drv-intf/cx25840.h
index 783c5bdd63eb..ccbfe72b5d6e 100644
--- a/include/media/drv-intf/cx25840.h
+++ b/include/media/drv-intf/cx25840.h
@@ -21,17 +21,23 @@
#ifndef _CX25840_H_
#define _CX25840_H_
-/* Note that the cx25840 driver requires that the bridge driver calls the
- v4l2_subdev's init operation in order to load the driver's firmware.
- Without this the audio standard detection will fail and you will
- only get mono.
-
- Since loading the firmware is often problematic when the driver is
- compiled into the kernel I recommend postponing calling this function
- until the first open of the video device. Another reason for
- postponing it is that loading this firmware takes a long time (seconds)
- due to the slow i2c bus speed. So it will speed up the boot process if
- you can avoid loading the fw as long as the video device isn't used. */
+/*
+ * Note that the cx25840 driver requires that the bridge driver calls the
+ * v4l2_subdev's load_fw operation in order to load the driver's firmware.
+ * This will load the firmware on the first invocation (further ones are NOP).
+ * Without this the audio standard detection will fail and you will
+ * only get mono.
+ * Alternatively, you can call the reset operation (this can be done
+ * multiple times if needed, each invocation will fully reinitialize
+ * the device).
+ *
+ * Since loading the firmware is often problematic when the driver is
+ * compiled into the kernel I recommend postponing calling this function
+ * until the first open of the video device. Another reason for
+ * postponing it is that loading this firmware takes a long time (seconds)
+ * due to the slow i2c bus speed. So it will speed up the boot process if
+ * you can avoid loading the fw as long as the video device isn't used.
+ */
enum cx25840_video_input {
/* Composite video inputs In1-In8 */
Powered by blists - more mailing lists