[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <lsq.1556377989.163969774@decadent.org.uk>
Date: Sat, 27 Apr 2019 16:13:09 +0100
From: Ben Hutchings <ben@...adent.org.uk>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
CC: akpm@...ux-foundation.org, Denis Kirjanov <kda@...ux-powerpc.org>,
"Jeff Moyer" <jmoyer@...hat.com>,
"Artur Paszkiewicz" <artur.paszkiewicz@...el.com>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Christoph Hellwig" <hch@....de>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
"Intel SCU Linux support" <intel-linux-scu@...el.com>,
"Logan Gunthorpe" <logang@...tatee.com>,
"Jens Axboe" <axboe@...nel.dk>
Subject: [PATCH 3.16 022/202] scsi: isci: initialize shost fully before
calling scsi_add_host()
3.16.66-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Logan Gunthorpe <logang@...tatee.com>
commit cc29a1b0a3f2597ce887d339222fa85b9307706d upstream.
scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the
command size to allocate based on the prot_capabilities. In the isci
driver, scsi_host_set_prot() is called after scsi_add_host() so the command
size gets calculated to be smaller than it needs to be. Eventually,
scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it
was sized correctly and a buffer overrun may occur.
However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line
size, the mistake can go unnoticed.
The bug was noticed after the struct request size was reduced by commit
9d037ad707ed ("block: remove req->timeout_list")
Which likely reduced the allocated space for the request by an entire cache
line, enough that the overflow could be hit and it caused a panic, on boot,
at:
RIP: 0010:t10_pi_complete+0x77/0x1c0
Call Trace:
<IRQ>
sd_done+0xf5/0x340
scsi_finish_command+0xc3/0x120
blk_done_softirq+0x83/0xb0
__do_softirq+0xa1/0x2e6
irq_exit+0xbc/0xd0
call_function_single_interrupt+0xf/0x20
</IRQ>
sd_done() would call scsi_prot_sg_count() which reads the number of
entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of
the allocated space it reads a garbage number and erroneously calls
t10_pi_complete().
To prevent this, the calls to scsi_host_set_prot() are moved into
isci_host_alloc() before the call to scsi_add_host(). Out of caution, also
move the similar call to scsi_host_set_guard().
Fixes: 3d2d75254915 ("[SCSI] isci: T10 DIF support")
Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@...tatee.com>
Cc: Intel SCU Linux support <intel-linux-scu@...el.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@...el.com>
Cc: "James E.J. Bottomley" <jejb@...ux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@...cle.com>
Cc: Christoph Hellwig <hch@....de>
Cc: Jens Axboe <axboe@...nel.dk>
Cc: Jeff Moyer <jmoyer@...hat.com>
Reviewed-by: Jeff Moyer <jmoyer@...hat.com>
Reviewed-by: Jens Axboe <axboe@...nel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Ben Hutchings <ben@...adent.org.uk>
---
drivers/scsi/isci/init.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -598,6 +598,13 @@ static struct isci_host *isci_host_alloc
shost->max_lun = ~0;
shost->max_cmd_len = MAX_COMMAND_SIZE;
+ /* turn on DIF support */
+ scsi_host_set_prot(shost,
+ SHOST_DIF_TYPE1_PROTECTION |
+ SHOST_DIF_TYPE2_PROTECTION |
+ SHOST_DIF_TYPE3_PROTECTION);
+ scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
+
err = scsi_add_host(shost, &pdev->dev);
if (err)
goto err_shost;
@@ -685,13 +692,6 @@ static int isci_pci_probe(struct pci_dev
goto err_host_alloc;
}
pci_info->hosts[i] = h;
-
- /* turn on DIF support */
- scsi_host_set_prot(to_shost(h),
- SHOST_DIF_TYPE1_PROTECTION |
- SHOST_DIF_TYPE2_PROTECTION |
- SHOST_DIF_TYPE3_PROTECTION);
- scsi_host_set_guard(to_shost(h), SHOST_DIX_GUARD_CRC);
}
err = isci_setup_interrupts(pdev);
Powered by blists - more mailing lists