[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFBinCB4BC01=ryTPAc77RbKucMRhQNUN-9C++=pM_u=dFYK6w@mail.gmail.com>
Date: Sat, 27 Apr 2019 22:09:30 +0200
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: Jerome Brunet <jbrunet@...libre.com>
Cc: Ulf Hansson <ulf.hansson@...aro.org>,
Kevin Hilman <khilman@...libre.com>,
linux-amlogic@...ts.infradead.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 7/7] mmc: meson-gx: add signal resampling tuning
On Tue, Apr 23, 2019 at 11:03 AM Jerome Brunet <jbrunet@...libre.com> wrote:
>
> Use signal resampling tuning for the UHS and HS200 modes.
> Instead of trying to get the *best* resampling setting with complex
> window calculation, we just stop on the first working setting.
>
> If the tuning setting later proves unstable, we will just continue the
> tuning where we left it.
>
> Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
[Khadas VIM now shows the HS200 eMMC]
Tested-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
BEFORE (no patches from this series applied):
# dmesg | grep mmc1
(no output)
AFTER (all 7 patches from this series applied):
# dmesg | grep mmc1
[ 2.945155] mmc1: new HS200 MMC card at address 0001
[ 2.957737] mmcblk1: mmc1:0001 AWPD3R 14.6 GiB
[ 2.966278] mmcblk1boot0: mmc1:0001 AWPD3R partition 1 4.00 MiB
[ 2.976114] mmcblk1boot1: mmc1:0001 AWPD3R partition 2 4.00 MiB
[ 2.986354] mmcblk1rpmb: mmc1:0001 AWPD3R partition 3 4.00 MiB,
chardev (241:0)
Regards
Martin
Powered by blists - more mailing lists