[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190428150822.13935-1-j.neuschaefer@gmx.net>
Date: Sun, 28 Apr 2019 17:08:22 +0200
From: Jonathan Neuschäfer <j.neuschaefer@....net>
To: linux-arm-msm@...r.kernel.org
Cc: Jonathan Neuschäfer <j.neuschaefer@....net>,
Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] dt-bindings: pinctrl: Fix spelling of bias-pull-up
The property is spelled 'bias-pull-up', as documented in
pinctrl-bindings.txt.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@....net>
---
.../devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt | 2 +-
.../devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt | 2 +-
.../devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt | 2 +-
.../devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt | 2 +-
.../devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
index c2dbb3e8d840..4e90ddd77784 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -42,7 +42,7 @@ information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
output-low, output-high.
Non-empty subnodes must specify the 'pins' property.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
index 991be0cd0948..84be0f2c6f3b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
@@ -44,7 +44,7 @@ information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.
Non-empty subnodes must specify the 'pins' property.
Note that not all properties are valid for all pins.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
index 7ed56a1b70fc..a7aaaa7db83b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
@@ -42,7 +42,7 @@ information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
output-low, output-high.
Non-empty subnodes must specify the 'pins' property.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
index cdc4787e59d2..f095209848c8 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
@@ -42,7 +42,7 @@ information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
output-low, output-high.
Non-empty subnodes must specify the 'pins' property.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
index c22e6c425d0b..004056506679 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
@@ -41,7 +41,7 @@ information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.
Non-empty subnodes must specify the 'pins' property.
Note that not all properties are valid for all pins.
--
2.20.1
Powered by blists - more mailing lists