| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190429225315.GA23589@bogus>
Date: Mon, 29 Apr 2019 17:53:15 -0500
From: Rob Herring <robh@...nel.org>
To: Stu Hsieh <stu.hsieh@...iatek.com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
CK Hu <ck.hu@...iatek.com>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, srv_heupstream@...iatek.com
Subject: Re: [PATCH v2 01/15] dt-bindings: media: Add binding for MT2712
MIPI-CSI2
On Tue, Apr 16, 2019 at 05:30:01PM +0800, Stu Hsieh wrote:
> Add MIPI-CSI2 dt-binding for Mediatek MT2712 SoC
>
> Signed-off-by: Stu Hsieh <stu.hsieh@...iatek.com>
> ---
> .../bindings/media/mediatek-mipicsi-camsv.txt | 53 ++++++++++++++++++
> .../media/mediatek-mipicsi-common.txt | 19 +++++++
> .../bindings/media/mediatek-mipicsi.txt | 54 +++++++++++++++++++
> 3 files changed, 126 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek-mipicsi-camsv.txt
> create mode 100644 Documentation/devicetree/bindings/media/mediatek-mipicsi-common.txt
> create mode 100644 Documentation/devicetree/bindings/media/mediatek-mipicsi.txt
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek-mipicsi-camsv.txt b/Documentation/devicetree/bindings/media/mediatek-mipicsi-camsv.txt
> new file mode 100644
> index 000000000000..5f34974f12ac
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-mipicsi-camsv.txt
> @@ -0,0 +1,53 @@
> +* Mediatek MIPI-CSI2 receiver camsv
> +
> +Mediatek MIPI-CSI2 receiver camsv transfer data to DRAM in Mediatek SoCs
> +
> +Required properties:
> +- reg : physical base address of the mipicsi receiver registers and length of
> + memory mapped region.
Looks like 2 regions in the example. What are they?
> +- clocks: device clocks, see
> + Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
1 clock?
> +- interrupts : interrupt number to the interrupt controller.
> +
> +Example:
> + seninf1_mux_camsv0: seninf_mux_camsv@...02100 {
> + reg = <0 0x15002120 0 0x40>,
> + <0 0x15004000 0 0x1000>;
> + clocks = <&imgsys CLK_IMG_CAM_SV_EN>;
> + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + seninf2_mux_camsv1: seninf_mux_camsv@...02500 {
> + reg = <0 0x15002520 0 0x40>,
> + <0 0x15005000 0 0x1000>;
> + clocks = <&imgsys CLK_IMG_CAM_SV_EN>;
> + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + seninf3_mux_camsv2: seninf_mux_camsv@...02900 {
> + reg = <0 0x15002920 0 0x40>,
> + <0 0x15006000 0 0x1000>;
> + clocks = <&imgsys CLK_IMG_CAM_SV1_EN>;
> + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + seninf4_mux_camsv3: seninf_mux_camsv@...02D00 {
> + reg = <0 0x15002D20 0 0x40>,
> + <0 0x15007000 0 0x1000>;
> + clocks = <&imgsys CLK_IMG_CAM_SV1_EN>;
> + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + seninf5_mux_camsv4: seninf_mux_camsv@...03100 {
> + reg = <0 0x15003120 0 0x40>,
> + <0 0x15008000 0 0x1000>;
> + clocks = <&imgsys CLK_IMG_CAM_SV2_EN>;
> + interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + seninf6_mux_camsv5: seninf_mux_camsv@...03500 {
> + reg = <0 0x15003520 0 0x40>,
> + <0 0x15009000 0 0x1000>;
> + clocks = <&imgsys CLK_IMG_CAM_SV2_EN>;
> + interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_LOW>;
> +
> diff --git a/Documentation/devicetree/bindings/media/mediatek-mipicsi-common.txt b/Documentation/devicetree/bindings/media/mediatek-mipicsi-common.txt
> new file mode 100644
> index 000000000000..a67c744b75f0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-mipicsi-common.txt
> @@ -0,0 +1,19 @@
> +* Mediatek MIPI-CSI2 receiver common
> +
> +Mediatek MIPI-CSI2 receiver is the MIPI Signal capture hardware present in Mediatek SoCs
> +
> +Required properties:
> +- compatible: should be "mediatek,mt2712-mipicsi-common"
> +- reg : physical base address of the mipicsi receiver registers and length of
> + memory mapped region.
> +- clocks: device clocks, see
> + Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
How many clocks and what are they?
> +
> +
> +Example:
> + mipicsi: mipicsi@...02000 {
> + compatible = "mediatek,mt2712-mipicsi-common", "syscon";
> + reg = <0 0x15002000 0 0x10>;
> + clocks = <&imgsys CLK_IMG_SENINF_CAM_EN>,
> + <&imgsys CLK_IMG_SENINF_SCAM_EN>;
> + };
> diff --git a/Documentation/devicetree/bindings/media/mediatek-mipicsi.txt b/Documentation/devicetree/bindings/media/mediatek-mipicsi.txt
> new file mode 100644
> index 000000000000..24741ed62b25
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-mipicsi.txt
> @@ -0,0 +1,54 @@
> +* Mediatek MIPI-CSI2 receiver
> +
> +Mediatek MIPI-CSI2 receiver is the MIPI Signal capture hardware present in Mediatek SoCs
> +
> +Required properties:
> +- compatible: should be "mediatek,mt2712-mipicsi"
> +- reg : physical base address of the mipicsi receiver registers and length of
> + memory mapped region.
How many regions?
> +- power-domains: a phandle to the power domain, see
> + Documentation/devicetree/bindings/power/power_domain.txt for details.
> +- mediatek,larb: must contain the local arbiters in the current Socs, see
> + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> + for details.
> +- iommus: should point to the respective IOMMU block with master port as
> + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> + for details.
How many?
> +- mediatek,seninf_mux_camsv: seninf_mux_camsv the data go through of the mipicsi port
s/_/-/
How many entries?
> +- mediatek,mipicsiid: the id of the mipicsi port
What is this for? We generally don't do device indexes in DT.
> +- mediatek,mipicsi: the common component of the two mipicsi port
> +
> +Example:
> + mipicsi0: mipicsi@...17000 {
> + compatible = "mediatek,mt2712-mipicsi";
> + mediatek,mipicsi = <&mipicsi>;
> + iommus = <&iommu0 M4U_PORT_CAM_DMA0>,
> + <&iommu0 M4U_PORT_CAM_DMA1>;
> + mediatek,larb = <&larb2>;
> + power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>;
> +
> + mediatek,seninf_mux_camsv = <&seninf1_mux_camsv0
> + &seninf2_mux_camsv1
> + &seninf3_mux_camsv2
> + &seninf4_mux_camsv3>;
> + reg = <0 0x10217000 0 0x60>,
> + <0 0x15002100 0 0x4>,
> + <0 0x15002300 0 0x100>;
> + mediatek,mipicsiid = <0>;
> + status="disabled";
Don't show status in examples.
> + };
> +
> + mipicsi1: mipicsi@...18000 {
> + compatible = "mediatek,mt2712-mipicsi";
> + mediatek,mipicsi = <&mipicsi>;
> + iommus = <&iommu0 M4U_PORT_CAM_DMA2>;
> + mediatek,larb = <&larb2>;
> + power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>;
> + mediatek,seninf_mux_camsv = <&seninf5_mux_camsv4
> + &seninf6_mux_camsv5>;
> + reg = <0 0x10218000 0 0x60>,
> + <0 0x15002500 0 0x4>,
> + <0 0x15002700 0 0x100>;
> + mediatek,mipicsiid = <1>;
> + status="disabled";
> + };
> \ No newline at end of file
Fix this.
> --
> 2.18.0
>
Powered by blists - more mailing lists