Message-ID: <e6c6dfe7-f67d-90a9-eee5-d30b94c7c978@arm.com>
Date:   Mon, 29 Apr 2019 12:36:47 +0100
From:   Marc Zyngier <marc.zyngier@....com>
To:     Geert Uytterhoeven <geert@...ux-m68k.org>
Cc:     Geert Uytterhoeven <geert+renesas@...der.be>,
        Thomas Gleixner <tglx@...utronix.de>,
        Jason Cooper <jason@...edaemon.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Simon Horman <horms@...ge.net.au>,
        Magnus Damm <magnus.damm@...il.com>,
        Chris Brandt <chris.brandt@...esas.com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/5] irqchip: Add Renesas RZ/A1 Interrupt Controller
 driver

On 29/04/2019 12:21, Geert Uytterhoeven wrote:
> Hi Marc,
> 
> On Mon, Apr 29, 2019 at 12:07 PM Marc Zyngier <marc.zyngier@....com> wrote:
>> On 29/04/2019 10:36, Geert Uytterhoeven wrote:
>>> Add a driver for the Renesas RZ/A1 Interrupt Controller.
>>>
>>> This supports using up to 8 external interrupts on RZ/A1, with
>>> configurable sense select.
>>>
>>> NMI edge select is not yet supported.
>>>
>>> Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
> 
>>> --- /dev/null
>>> +++ b/drivers/irqchip/irq-renesas-rza1.c
> 
>>> +static void rza1_irqc_eoi(struct irq_data *d)
>>> +{
>>> +     struct rza1_irqc_priv *priv = irq_data_to_priv(d);
>>> +     unsigned int bit = BIT(irqd_to_hwirq(d));
>>
>> Please use u32 instead of "unsigned int" for something that operates on
>> HW registers.
> 
> Even for 16-bit registers?

Ah, I'm so used to see 32bit accessors everywhere that I missed the fact
that this is a 16bit MMIO. How bizarre! ;-)

In general, try to have types that do match the actual size of the MMIO
access. There are a few exceptions to this rule (using an unsigned long
to be able to use bitmap operations, for example), but that's the
general idea.

> 
>>> +     u16 tmp;
>>> +
>>> +     tmp = readw(priv->base + IRQRR);
>>
>> Same thing here. It's less confusing to use a u32 and mask out the top
>> bits if needed rather than having this implicit cast (applies all over
>> the code).
> 
> ... so yes.

To sum it up:

readw/writew -> u16
readl/writel -> u32

> 
>>
>>> +     if (tmp & bit)
>>> +             writew(GENMASK(IRQC_NUM_IRQ - 1, 0) & ~bit, priv->base + IRQRR);
>>
>> Please use the _relaxed accessors all over the driver, you really do not
>> need a DSB on each of these accesses.
> 
> OK.
> 
>>> +static int rza1_irqc_set_type(struct irq_data *d, unsigned int type)
>>> +{
>>> +     struct rza1_irqc_priv *priv = irq_data_to_priv(d);
>>> +     unsigned int hw_irq = irqd_to_hwirq(d);
>>> +     u16 sense, tmp;
>>> +
>>> +     switch (type & IRQ_TYPE_SENSE_MASK) {
>>> +     case IRQ_TYPE_LEVEL_LOW:
>>> +             sense = ICR1_IRQS_LEVEL_LOW;
>>> +             break;
>>> +
>>> +     case IRQ_TYPE_EDGE_FALLING:
>>> +             sense = ICR1_IRQS_EDGE_FALLING;
>>> +             break;
>>> +
>>> +     case IRQ_TYPE_EDGE_RISING:
>>> +             sense = ICR1_IRQS_EDGE_RISING;
>>> +             break;
>>> +
>>> +     case IRQ_TYPE_EDGE_BOTH:
>>> +             sense = ICR1_IRQS_EDGE_BOTH;
>>> +             break;
>>> +
>>> +     default:
>>> +             return -EINVAL;
>>> +     }
>>> +
>>> +     tmp = readw(priv->base + ICR1);
>>> +     tmp &= ~ICR1_IRQS_MASK(hw_irq);
>>> +     tmp |= ICR1_IRQS(hw_irq, sense);
>>> +     writew(tmp, priv->base + ICR1);
>>> +     return 0;
>>
>> Don't you need to propagate the trigger configuration to the parent irqchip?
> 
> No, the line to the parent GIC is always configured for high-level.
> 
>>> +static int rza1_irqc_alloc(struct irq_domain *domain, unsigned int virq,
>>> +                        unsigned int nr_irqs, void *arg)
>>> +{
>>> +     struct rza1_irqc_priv *priv = domain->host_data;
>>> +     struct irq_fwspec *fwspec = arg;
>>> +     struct irq_fwspec spec;
>>> +     int ret;
>>> +
>>> +     ret = irq_domain_set_hwirq_and_chip(domain, virq, fwspec->param[0],
>>> +                                         &priv->chip, priv);
>>> +     if (ret)
>>> +             return ret;
>>> +
>>> +     spec.fwnode = &priv->dev->of_node->fwnode;
>>> +     spec.param_count = 3;
>>> +     spec.param[0] = GIC_SPI;
>>> +     spec.param[1] = priv->gic_spi_base + fwspec->param[0];
>>> +     spec.param[2] = IRQ_TYPE_LEVEL_HIGH;
>>
>> This is related to my earlier question: Does this block turn everything
>> into level interrupts?
> 
> That is my understanding of the hardware:
>   - Low-level interrupts are cleared when input becomes high again,
>   - Rising/falling/both edge interrupts are cleared by reading+writing IRQRR.
> 
> FTR, the Hardware User Manual is available from
> https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza1h.html#documents
> (Section 7. Interrupt Controller).

OK, thanks for the detailed explanation.

> 
>>> +static int rza1_irqc_probe(struct platform_device *pdev)
>>> +{
> 
>>> +     priv->chip.name = dev_name(dev);
>>
>> name should normally be used to identify the overall "class" of
> 
> OK, replacing by "rza1-irqc".
> 
>> interrupt. .device is what should be used for the device itself.
> 
> You mean .parent_device?
> Been there, done that: if I fill that in with "dev", it fails with
> 
>     gpio-keys keyboard: Unable to claim irq 41; error -13
>     gpio-keys: probe of keyboard failed with error -13
> 
> due to the call to pm_runtime_get_sync() in irq_chip_pm_get() failing.
> This driver doesn't have (and doesn't need) Runtime PM.

OK, fair enough. Who needs PM anyway? ;-)

> 
>>> +struct rza1_irqc_info rza1_irqc_info = {
>>> +     .gic_spi_base = 0,
>>> +};
>>
>> To answer your question in the cover letter, I'd rather this came from
>> DT. And otherwise, it should be be static.
> 
> (Oops, forget the "static const")
> 
> Using a custom property, or derived from 8 interrupt specifiers in the
> interrupts property?

A custom property is fine by me (everybody does that anyway).

> 
>> It otherwise looks good to me. If you respin it quickly enough, I'm
>> happy to take it for 5.2.
> 
> Thanks, will do tomorrow, so Chris (in NC.US; let's hope he doesn't
> celebrate Golden Week) has a chance to comment...

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

Powered by blists - more mailing lists