| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190430043242.29687-2-chuanhua.han@nxp.com>
Date: Tue, 30 Apr 2019 12:32:41 +0800
From: Chuanhua Han <chuanhua.han@....com>
To: robh+dt@...nel.org, mark.rutland@....com, shawnguo@...nel.org,
s.hauer@...gutronix.de, leoyang.li@....com
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-i2c@...r.kernel.org,
kernel@...gutronix.de, linux-imx@....com, festevam@...il.com,
wsa+renesas@...g-engineering.com, u.kleine-koenig@...gutronix.de,
eha@...f.com, linux@...pel-privat.de, sumit.batra@....com,
l.stach@...gutronix.de, peda@...ntia.se,
Chuanhua Han <chuanhua.han@....com>
Subject: [PATCH 2/3] i2c: imx: I2C Driver IBC and SCL Divider for MUL=2 and MUL=4
NXP Layerscape SoC have up to three MUL options available for all
divider values,we choice of MUL determines the internal monitor rate
of the I2C bus (SCL and SDA signals).
The current kernel driver supports MUL=1 by default ,but doesn't have
the IBC and SCL Divider entries in vf610_i2c_clk_div for MUL=2 and
MUL=4,so we need to add the corresponding support.
Signed-off-by: Sumit Batra <sumit.batra@....com>
Signed-off-by: Chuanhua Han <chuanhua.han@....com>
---
drivers/i2c/busses/i2c-imx.c | 71 +++++++++++++++++++++++++++++++++++-
1 file changed, 69 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 42fed40198a0..ac5a334b7339 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -38,6 +38,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
+#include <linux/of_address.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/i2c-imx.h>
#include <linux/platform_device.h>
@@ -156,6 +157,44 @@ static struct imx_i2c_clk_pair vf610_i2c_clk_div[] = {
{ 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
};
+static struct imx_i2c_clk_pair mul2_i2c_clk_div[] = {
+ { 40, 0x40 }, { 44, 0x41 }, { 48, 0x42 }, { 52, 0x43 },
+ { 56, 0x44 }, { 60, 0x45 }, { 68, 0x46 }, { 80, 0x47 },
+ { 56, 0x48 }, { 64, 0x49 }, { 72, 0x4A }, { 80, 0x4B },
+ { 88, 0x4C }, { 96, 0x4D }, { 112, 0x4E }, { 136, 0x4F },
+ { 96, 0x50 }, { 112, 0x51 }, { 128, 0x52 }, { 144, 0x53 },
+ { 160, 0x54 }, { 176, 0x55 }, { 208, 0x56 }, { 256, 0x57 },
+ { 160, 0x58 }, { 192, 0x59 }, { 224, 0x5A }, { 256, 0x5B },
+ { 288, 0x5C }, { 320, 0x5D }, { 384, 0x5E }, { 480, 0x5F },
+ { 320, 0x60 }, { 384, 0x61 }, { 448, 0x62 }, { 512, 0x63 },
+ { 576, 0x64 }, { 640, 0x65 }, { 768, 0x66 }, { 960, 0x67 },
+ { 640, 0x68 }, { 768, 0x69 }, { 896, 0x6A }, { 1024, 0x6B },
+ { 1152, 0x6C }, { 1280, 0x6D }, { 1536, 0x6E }, { 1920, 0x6F },
+ { 1280, 0x70 }, { 1536, 0x71 }, { 1792, 0x72 }, { 2048, 0x73 },
+ { 2304, 0x74 }, { 2560, 0x75 }, { 3072, 0x76 }, { 3840, 0x77 },
+ { 2560, 0x78 }, { 3072, 0x79 }, { 3584, 0x7A }, { 4096, 0x7B },
+ { 4608, 0x7C }, { 5120, 0x7D }, { 6144, 0x7E }, { 7680, 0x7F },
+};
+
+static struct imx_i2c_clk_pair mul4_i2c_clk_div[] = {
+ { 80, 0x80 }, { 88, 0x81 }, { 96, 0x82 }, { 104, 0x83 },
+ { 112, 0x84 }, { 120, 0x85 }, { 136, 0x86 }, { 160, 0x87 },
+ { 112, 0x88 }, { 128, 0x89 }, { 144, 0x8A }, { 160, 0x8B },
+ { 176, 0x8C }, { 192, 0x8D }, { 224, 0x8E }, { 272, 0x8F },
+ { 192, 0x90 }, { 224, 0x91 }, { 256, 0x92 }, { 288, 0x93 },
+ { 320, 0x94 }, { 352, 0x95 }, { 416, 0x96 }, { 512, 0x97 },
+ { 320, 0x98 }, { 384, 0x99 }, { 448, 0x9A }, { 512, 0x9B },
+ { 576, 0x9C }, { 640, 0x9D }, { 768, 0x9E }, { 960, 0x9F },
+ { 640, 0xA0 }, { 768, 0xA1 }, { 896, 0xA2 }, { 1024, 0xA3 },
+ { 1152, 0xA4 }, { 1280, 0xA5 }, { 1536, 0xA6 }, { 1792, 0xAA },
+ { 1280, 0xA8 }, { 1536, 0xA9 }, { 1920, 0xA7 }, { 2048, 0xAB },
+ { 2304, 0xAC }, { 2560, 0xAD }, { 3072, 0xAE }, { 3584, 0xB2 },
+ { 2560, 0xB0 }, { 3072, 0xB1 }, { 3820, 0xAF }, { 4096, 0xB3 },
+ { 4608, 0xB4 }, { 5120, 0xB5 }, { 6144, 0xB6 }, { 7680, 0xB7 },
+ { 5120, 0xB8 }, { 6144, 0xB9 }, { 7168, 0xBA }, { 8192, 0xBB },
+ { 9216, 0xBC }, { 10240, 0xBD }, { 12288, 0xBE }, { 15360, 0xBF },
+};
+
enum imx_i2c_type {
IMX1_I2C,
IMX21_I2C,
@@ -234,6 +273,24 @@ static struct imx_i2c_hwdata vf610_i2c_hwdata = {
};
+static struct imx_i2c_hwdata mul2_i2c_hwdata = {
+ .devtype = VF610_I2C,
+ .regshift = VF610_I2C_REGSHIFT,
+ .clk_div = mul2_i2c_clk_div,
+ .ndivs = ARRAY_SIZE(mul2_i2c_clk_div),
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W1C,
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_0,
+};
+
+static struct imx_i2c_hwdata mul4_i2c_hwdata = {
+ .devtype = VF610_I2C,
+ .regshift = VF610_I2C_REGSHIFT,
+ .clk_div = mul4_i2c_clk_div,
+ .ndivs = ARRAY_SIZE(mul4_i2c_clk_div),
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W1C,
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_0,
+};
+
static const struct platform_device_id imx_i2c_devtype[] = {
{
.name = "imx1-i2c",
@@ -1058,6 +1115,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
void __iomem *base;
int irq, ret;
dma_addr_t phy_addr;
+ u32 mul_value;
dev_dbg(&pdev->dev, "<%s>\n", __func__);
@@ -1077,11 +1135,20 @@ static int i2c_imx_probe(struct platform_device *pdev)
if (!i2c_imx)
return -ENOMEM;
- if (of_id)
+ if (of_id) {
i2c_imx->hwdata = of_id->data;
- else
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "mul-value", &mul_value);
+ if (!ret) {
+ if (mul_value == 2)
+ i2c_imx->hwdata = &mul2_i2c_hwdata;
+ else if (mul_value == 4)
+ i2c_imx->hwdata = &mul4_i2c_hwdata;
+ }
+ } else {
i2c_imx->hwdata = (struct imx_i2c_hwdata *)
platform_get_device_id(pdev)->driver_data;
+ }
/* Setup i2c_imx driver structure */
strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
--
2.17.1
Powered by blists - more mailing lists