linux-kernel - [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190430044719.30720-1-chuanhua.han@nxp.com>
Date:   Tue, 30 Apr 2019 12:47:18 +0800
From:   Chuanhua Han <chuanhua.han@....com>
To:     shawnguo@...nel.org, s.hauer@...gutronix.de, leoyang.li@....com,
        robh+dt@...nel.org, mark.rutland@....com
Cc:     linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        festevam@...il.com, linux-imx@....com,
        wsa+renesas@...g-engineering.com, u.kleine-koenig@...gutronix.de,
        eha@...f.com, linux@...pel-privat.de, l.stach@...gutronix.de,
        peda@...ntia.se, sumit.batra@....com,
        Chuanhua Han <chuanhua.han@....com>
Subject: [PATCH 1/2] i2c: imx: I2C Driver doesn't consider I2C_IPGCLK_SEL RCW bit when using ls1046a SoC

The current kernel driver does not consider I2C_IPGCLK_SEL (424 bit
of RCW) in deciding  i2c_clk_rate in function i2c_imx_set_clk()
{ 0 Platform clock/4, 1 Platform clock/2}.

When using ls1046a SoC, this populates incorrect value in IBFD register
if I2C_IPGCLK_SEL = 0, which generates half of the desired Clock.

Therefore, if ls1046a SoC is used, we need to set the i2c clock
according to the corresponding RCW.

Signed-off-by: Sumit Batra <sumit.batra@....com>
Signed-off-by: Chuanhua Han <chuanhua.han@....com>
---
 drivers/i2c/busses/i2c-imx.c | 64 ++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 422f1a445b55..7186cf3c7d24 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -45,6 +45,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/fsl/guts.h>
+#include <linux/sys_soc.h>
 
 /* This will be the driver name the kernel reports */
 #define DRIVER_NAME "imx-i2c"
@@ -109,6 +111,21 @@
 
 #define I2C_PM_TIMEOUT		10 /* ms */
 
+/* 14-1 Since array index starts from 0 */
+#define RCW_I2C_IPGCLK_WORD (14 - 1)
+/*
+ * Set mask for RCW 424th bit, reading from DCFG_CCSR RCW Status Registers
+ * Since this register in RM depicted as big endian,
+ * so consider 31st bit as LSB for creating the mask.
+ */
+#define RCW_I2C_IPGCLK_MASK    0x800000
+int i2c_ipgclk_sel = 1;
+
+static const struct soc_device_attribute ls1046a_soc[] = {
+	       {.family = "QorIQ LS1046A"},
+	       { /* sentinel */ }
+};
+
 /*
  * sorted list of clock divider, register value pairs
  * taken from table 26-5, p.26-9, Freescale i.MX
@@ -304,6 +321,11 @@ static const struct platform_device_id imx_i2c_devtype[] = {
 };
 MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
 
+static const struct of_device_id guts_device_ids[] = {
+	{ .compatible = "fsl,qoriq-device-config", },
+	{}
+};
+
 static const struct of_device_id i2c_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, },
 	{ .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, },
@@ -533,6 +555,9 @@ static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
 	unsigned int div;
 	int i;
 
+	if (!i2c_ipgclk_sel)
+		i2c_clk_rate = i2c_clk_rate / 2;
+
 	/* Divider value calculation */
 	if (i2c_imx->cur_clk == i2c_clk_rate)
 		return;
@@ -551,6 +576,10 @@ static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
 	/* Store divider value */
 	i2c_imx->ifdr = i2c_clk_div[i].val;
 
+	pr_alert("[%s] CLK Rate=%u Bitrate =%u Div =%u Value =%d\n",
+		 __func__, i2c_clk_rate, i2c_imx->bitrate,
+		 div, i2c_clk_div[i].val);
+
 	/*
 	 * There dummy delay is calculated.
 	 * It should be about one I2C clock period long.
@@ -1116,6 +1145,9 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	int irq, ret;
 	dma_addr_t phy_addr;
 	u32 mul_value;
+	struct device_node *guts_node;
+	static struct ccsr_guts __iomem *guts_regs;
+	u32 rcw_reg;
 
 	dev_dbg(&pdev->dev, "<%s>\n", __func__);
 
@@ -1135,6 +1167,38 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	if (!i2c_imx)
 		return -ENOMEM;
 
+	if (soc_device_match(ls1046a_soc)) {
+		/*
+		 * Make device node for GUTS/DCFG (global utilities block)
+		 * to read RCW.
+		 */
+		guts_node = of_find_matching_node(NULL, guts_device_ids);
+		if (!guts_node) {
+			dev_err(&pdev->dev, "Could not find GUTS node\n");
+			return -ENODEV;
+		}
+		/*
+		 * Memory (IO)  MAP the DCFG registers(for RCW) to
+		 * be used in kernel virtual address space.
+		 */
+		guts_regs = of_iomap(guts_node, 0);
+		of_node_put(guts_node);
+		if (!guts_regs) {
+			dev_err(&pdev->dev, "IOREMAP of GUTS node failed\n");
+			return -ENOMEM;
+		}
+		/* Read rcw bit 424 (starting from 0) */
+		rcw_reg = ioread32be(&guts_regs->rcwsr[RCW_I2C_IPGCLK_WORD]);
+		pr_alert("RCW REG[%d]=0x%x\n", RCW_I2C_IPGCLK_WORD, rcw_reg);
+		if (rcw_reg & RCW_I2C_IPGCLK_MASK) {
+			pr_alert("Div by 2 Case Detected in RCW\n");
+			i2c_ipgclk_sel = 1;
+		} else {
+			pr_alert("Div by 4 Case Detected in RCW\n");
+			i2c_ipgclk_sel = 0;
+		}
+	}
+
 	if (of_id) {
 		i2c_imx->hwdata = of_id->data;
 		ret = of_property_read_u32(pdev->dev.of_node,
-- 
2.17.1