linux-kernel - Re: [PATCH v3 1/3] clk: analogbits: add Wide-Range PLL library

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <alpine.DEB.2.21.9999.1904292252120.7063@viisi.sifive.com>
Date:   Mon, 29 Apr 2019 22:57:15 -0700 (PDT)
From:   Paul Walmsley <paul.walmsley@...ive.com>
To:     Stephen Boyd <sboyd@...nel.org>
cc:     Paul Walmsley <paul.walmsley@...ive.com>,
        devicetree@...r.kernel.org, linux-clk@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
        Paul Walmsley <paul@...an.com>,
        Wesley Terpstra <wesley@...ive.com>,
        Palmer Dabbelt <palmer@...ive.com>,
        Michael Turquette <mturquette@...libre.com>,
        Megan Wachs <megan@...ive.com>
Subject: Re: [PATCH v3 1/3] clk: analogbits: add Wide-Range PLL library

On Mon, 29 Apr 2019, Stephen Boyd wrote:

> Quoting Paul Walmsley (2019-04-29 12:42:07)
> > On Fri, 26 Apr 2019, Paul Walmsley wrote:
> > > On Fri, 26 Apr 2019, Stephen Boyd wrote:
> > > 
> > > > Quoting Paul Walmsley (2019-04-11 01:27:32)
> > > > > Add common library code for the Analog Bits Wide-Range PLL (WRPLL) IP
> > > > > block, as implemented in TSMC CLN28HPC.
> > > > 
> > > > I haven't deeply reviewed at all, but I already get two problems when
> > > > compile testing these patches. I can fix them up if nothing else needs
> > > > fixing.
> > > > 
> > > > drivers/clk/analogbits/wrpll-cln28hpc.c:165 __wrpll_calc_divq() warn: should 'target_rate << divq' be a 64 bit type?
> > > > drivers/clk/sifive/fu540-prci.c:214:16: error: return expression in void function
> > > 
> > > Hmm, that's odd.  I will definitely take a look and repost.
> > 
> > I'm not able to reproduce these problems.  The configs tried here were:
> > 
> > - 64-bit RISC-V defconfig w/ PRCI driver enabled (gcc 8.2.0 built with 
> >   crosstool-NG 1.24.0)
> > 
> > - 32-bit ARM defconfig w/ PRCI driver enabled (gcc 8.3.0 built with 
> >   crosstool-NG 1.24.0)
> > 
> > - 32-bit i386 defconfig w/ PRCI driver enabled (gcc 
> >   5.4.0-6ubuntu1~16.04.11)
> > 
> > Could you post the toolchain and kernel config you're using?
> > 
> 
> I'm running sparse and smatch too.

OK.  I was able to reproduce the __wrpll_calc_divq() warning.  It's been 
resolved in the upcoming revision.  

But I don't see the second error with either sparse or smatch.  (This is 
with sparse at commit 2b96cd804dc7 and smatch at commit f0092daff69d.)


- Paul