[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAB4CAwfF7FoQK9OndOm_yHQe19j=E_cNLn3eTBfoggEacONiyg@mail.gmail.com>
Date: Tue, 30 Apr 2019 02:12:29 +0800
From: Chris Chiu <chiu@...lessm.com>
To: Andriy Shevchenko <andriy.shevchenko@...el.com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Daniel Drake <drake@...lessm.com>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Linux Upstreaming Team <linux@...lessm.com>
Subject: Re: [PATCH v3] pinctrl:intel: Retain HOSTSW_OWN for requested gpio pin
On Fri, Apr 26, 2019 at 8:50 PM Andriy Shevchenko
<andriy.shevchenko@...el.com> wrote:
>
> On Tue, Apr 23, 2019 at 12:38:17PM +0200, Linus Walleij wrote:
> > On Mon, Apr 15, 2019 at 7:54 AM Chris Chiu <chiu@...lessm.com> wrote:
> >
> > > The touchpad of the ASUS laptops E403NA, X540NA, X541NA are not
> > > responsive after suspend/resume. The following error message
> > > shows after resume.
> > > i2c_hid i2c-ELAN1200:00: failed to reset device.
> > >
> > > On these laptops, the touchpad interrupt is connected via a GPIO
> > > pin which is controlled by Intel pinctrl. After system resumes,
> > > the GPIO is in ACPI mode and no longer works as an IRQ.
> > >
> > > This commit saves the HOSTSW_OWN value during suspend, make sure
> > > the HOSTSW_OWN mode remains the same after resume.
> > >
> > > Signed-off-by: Chris Chiu <chiu@...lessm.com>
> >
> > This v3 patch applied with Mika's ACK.
>
> Hmm... It's supposed to go along with our PR.
Anything I can help with?
Chris
>
> --
> With Best Regards,
> Andy Shevchenko
>
>
Powered by blists - more mailing lists