[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAL_JsqJGMBhqRw0D9ehsV=A7cQ4cPah=Ot335npraBdGm1Yhag@mail.gmail.com>
Date: Tue, 30 Apr 2019 08:51:43 -0500
From: Rob Herring <robh@...nel.org>
To: Doug Anderson <dianders@...omium.org>
Cc: Minas Harutyunyan <hminas@...opsys.com>,
Heiko Stuebner <heiko@...ech.de>,
Felipe Balbi <felipe.balbi@...ux.intel.com>,
Alexandru M Stan <amstan@...omium.org>,
"open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>,
Linux USB List <linux-usb@...r.kernel.org>,
Randy Li <ayaka@...lik.info>,
Matthias Kaehlcke <mka@...omium.org>,
Ryan Case <ryandcase@...omium.org>,
Julius Werner <jwerner@...omium.org>,
Elaine Zhang <zhangqing@...k-chips.com>,
devicetree@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mark Rutland <mark.rutland@....com>
Subject: Re: [PATCH v2 1/4] dt-bindings: usb: dwc2: Document quirk to reset
PHY upon wakeup
On Tue, Apr 30, 2019 at 12:29 AM Doug Anderson <dianders@...omium.org> wrote:
>
> Hi,
>
> On Mon, Apr 29, 2019 at 5:54 PM Rob Herring <robh@...nel.org> wrote:
> >
> > On Tue, Apr 16, 2019 at 02:53:48PM -0700, Douglas Anderson wrote:
> > > On Rockchip rk3288 there's a hardware quirk where we need to assert
> > > the reset signal to the PHY when we get a remote wakeup on one of the
> > > two ports. Document this quirk in the bindings.
> > >
> > > Signed-off-by: Douglas Anderson <dianders@...omium.org>
> > > Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
> > > ---
> > >
> > > Changes in v2: None
> > >
> > > Documentation/devicetree/bindings/usb/dwc2.txt | 2 ++
> > > 1 file changed, 2 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
> > > index 6dc3c4a34483..f70f3aee4bfc 100644
> > > --- a/Documentation/devicetree/bindings/usb/dwc2.txt
> > > +++ b/Documentation/devicetree/bindings/usb/dwc2.txt
> > > @@ -37,6 +37,8 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
> > > - g-rx-fifo-size: size of rx fifo size in gadget mode.
> > > - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
> > > - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
> > > +- snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
> > > + we detect a wakeup. This is due to a hardware errata.
> >
> > Synopsys or Rockchip errata?
> >
> > Ideally, this should be implied by the controller or phy compatible.
>
> I have no idea. The errata was described to me by Rockchip but I
> don't know if it's common to more than one board.
>
> You're right that we could do it on the controller compatible, but we
> have to be careful. The two ports on rk3288 currently have the same
> compatible string but the errata only applies to one of them. ...so
> I'd have to cue on not just the compatible string but also detect
> whether we're on the "OTG" port of the "host only" port. That's not
> too hard, though since it is probe-able.
>
> I'm happy to spin this but I'll wait to hear from Felipe. This is
> already in his testing tree, so presumably I should do a follow-up
> patch. ...but if he wants me to re-post I can do that too.
Okay, I guess it is fine as-is.
Rob
Powered by blists - more mailing lists