| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 1 May 2019 23:19:03 +0200
From: Paul Bolle <pebolle@...cali.nl>
To: "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Cc: Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
gigaset307x-common@...ts.sourceforge.net,
linux-kernel@...r.kernel.org, Arnd Bergmann <arnd@...db.de>
Subject: [PATCH] isdn: bas_gigaset: use usb_fill_int_urb() properly
The switch to make bas_gigaset use usb_fill_int_urb() - instead of
filling that urb "by hand" - missed the subtle ordering of the previous
code.
See, before the switch urb->dev was set to a member somewhere deep in a
complicated structure and then supplied to usb_rcvisocpipe() and
usb_sndisocpipe(). After that switch urb->dev wasn't set to anything
specific before being supplied to those two macros. This triggers a
nasty oops:
BUG: unable to handle kernel NULL pointer dereference at 00000000
#PF error: [normal kernel read fault]
*pde = 00000000
Oops: 0000 [#1] SMP
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-0.rc4.1.local0.fc28.i686 #1
Hardware name: IBM 2525FAG/2525FAG, BIOS 74ET64WW (2.09 ) 12/14/2006
EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset]
Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca
EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000
ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: f30c9f20
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086
CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0
Call Trace:
<SOFTIRQ>
? gigaset_isdn_connD+0xf6/0x140 [gigaset]
gigaset_handle_event+0x173e/0x1b90 [gigaset]
tasklet_action_common.isra.16+0x4e/0xf0
tasklet_action+0x1e/0x20
__do_softirq+0xb2/0x293
? __irqentry_text_end+0x3/0x3
call_on_stack+0x45/0x50
</SOFTIRQ>
? irq_exit+0xb5/0xc0
? do_IRQ+0x78/0xd0
? acpi_idle_enter_s2idle+0x50/0x50
? common_interrupt+0xd4/0xdc
? acpi_idle_enter_s2idle+0x50/0x50
? sched_cpu_activate+0x1b/0xf0
? acpi_fan_resume.cold.7+0x9/0x18
? cpuidle_enter_state+0x152/0x4c0
? cpuidle_enter+0x14/0x20
? call_cpuidle+0x21/0x40
? do_idle+0x1c8/0x200
? cpu_startup_entry+0x25/0x30
? rest_init+0x88/0x8a
? arch_call_rest_init+0xd/0x19
? start_kernel+0x42f/0x448
? i386_start_kernel+0xac/0xb0
? startup_32_smp+0x164/0x168
Modules linked in: ppp_generic slhc capi bas_gigaset gigaset kernelcapi nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables sunrpc ipw2200 iTCO_wdt gpio_ich snd_intel8x0 libipw iTCO_vendor_support snd_ac97_codec lib80211 ppdev ac97_bus snd_seq cfg80211 snd_seq_device pcspkr thinkpad_acpi lpc_ich snd_pcm i2c_i801 snd_timer ledtrig_audio snd soundcore rfkill parport_pc parport pcc_cpufreq acpi_cpufreq i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sdhci_pci sysimgblt cqhci fb_sys_fops drm sdhci mmc_core tg3 ata_generic serio_raw yenta_socket pata_acpi video
CR2: 0000000000000000
---[ end trace 1fe07487b9200c73 ]---
EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset]
Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca
EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000
ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: cddcb3bc
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086
CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0xcc00000 from 0xc0400000 (relocation range: 0xc0000000-0xf6ffdfff)
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
No-one noticed because this Oops is apparently only triggered by setting
up an ISDN data connection on a live ISDN line on a gigaset base (ie,
the PBX that the gigaset driver support). Very few people do that
running present day kernels.
Anyhow, a little code reorganization makes this problem go away, while
avoiding the subtle ordering that was used in the past. So let's do
that.
Fixes: 78c696c19578 ("isdn: gigaset: use usb_fill_int_urb()")
Signed-off-by: Paul Bolle <pebolle@...cali.nl>
---
Arnd's ISDN cleanup hasn't yet hit net-next so this still uses
drivers/isdn. If people prefer to apply this after Arnd has exiled
gigaset into staging, I'll gladly respin.
drivers/isdn/gigaset/bas-gigaset.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index ecdeb89645d0..149b1aca52a2 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -958,6 +958,7 @@ static void write_iso_callback(struct urb *urb)
*/
static int starturbs(struct bc_state *bcs)
{
+ struct usb_device *udev = bcs->cs->hw.bas->udev;
struct bas_bc_state *ubc = bcs->hw.bas;
struct urb *urb;
int j, k;
@@ -975,8 +976,8 @@ static int starturbs(struct bc_state *bcs)
rc = -EFAULT;
goto error;
}
- usb_fill_int_urb(urb, bcs->cs->hw.bas->udev,
- usb_rcvisocpipe(urb->dev, 3 + 2 * bcs->channel),
+ usb_fill_int_urb(urb, udev,
+ usb_rcvisocpipe(udev, 3 + 2 * bcs->channel),
ubc->isoinbuf + k * BAS_INBUFSIZE,
BAS_INBUFSIZE, read_iso_callback, bcs,
BAS_FRAMETIME);
@@ -1006,8 +1007,8 @@ static int starturbs(struct bc_state *bcs)
rc = -EFAULT;
goto error;
}
- usb_fill_int_urb(urb, bcs->cs->hw.bas->udev,
- usb_sndisocpipe(urb->dev, 4 + 2 * bcs->channel),
+ usb_fill_int_urb(urb, udev,
+ usb_sndisocpipe(udev, 4 + 2 * bcs->channel),
ubc->isooutbuf->data,
sizeof(ubc->isooutbuf->data),
write_iso_callback, &ubc->isoouturbs[k],
--
2.17.2
Powered by blists - more mailing lists