linux-kernel - Re: [PATCH v2] arm64: dts: ls1028a: Add USB dt nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190501235410.GA25492@bogus>
Date:   Wed, 1 May 2019 18:54:10 -0500
From:   Rob Herring <robh@...nel.org>
To:     Ran Wang <ran.wang_1@....com>
Cc:     Shawn Guo <shawnguo@...nel.org>, Leo Li <leoyang.li@....com>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] arm64: dts: ls1028a: Add USB dt nodes

On Fri, Apr 26, 2019 at 05:54:26AM +0000, Ran Wang wrote:
> This patch adds USB dt nodes for LS1028A.
> 
> Signed-off-by: Ran Wang <ran.wang_1@....com>
> ---
> Changes in v2:
>   - Rename node from usb3@... to usb@... to meet DTSpec
> 
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi |   20 ++++++++++++++++++++
>  1 files changed, 20 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 8dd3501..188cfb8 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -144,6 +144,26 @@
>  			clocks = <&sysclk>;
>  		};
>  
> +		usb0:usb@...0000 {
                     ^ space needed

> +			compatible= "snps,dwc3";

Needs an SoC specific compatible.

> +			reg= <0x0 0x3100000 0x0 0x10000>;
> +			interrupts= <0 80 0x4>;
> +			dr_mode= "host";
> +			snps,dis_rxdet_inp3_quirk;
> +			snps,quirk-frame-length-adjustment = <0x20>;
> +			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
> +		};
> +
> +		usb1:usb@...0000 {
> +			compatible= "snps,dwc3";
> +			reg= <0x0 0x3110000 0x0 0x10000>;
> +			interrupts= <0 81 0x4>;
> +			dr_mode= "host";
> +			snps,dis_rxdet_inp3_quirk;
> +			snps,quirk-frame-length-adjustment = <0x20>;
> +			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
> +		};
> +
>  		i2c0: i2c@...0000 {
>  			compatible = "fsl,vf610-i2c";
>  			#address-cells = <1>;
> -- 
> 1.7.1
>