linux-kernel - Re: [PATCH v5 3/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190502073904.yng5dz5kwgulw6ha@flea>
Date:   Thu, 2 May 2019 09:39:04 +0200
From:   Maxime Ripard <maxime.ripard@...tlin.com>
To:     Pablo Greco <pgreco@...tosproject.org>
Cc:     linux-sunxi@...glegroups.com, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Chen-Yu Tsai <wens@...e.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 3/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable
 GMAC ethernet controller

On Tue, Apr 23, 2019 at 02:26:00PM -0300, Pablo Greco wrote:
> Just like the Bananapi M2 Ultra, the Bananapi M2 Berry has a Realtek
> RTL8211E RGMII PHY tied to the GMAC.
> The PMIC's DC1SW output provides power for the PHY, while the ALDO2
> output provides I/O voltages on both sides.
>
> Signed-off-by: Pablo Greco <pgreco@...tosproject.org>
> ---
>  arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 29 +++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> index 2cb2ce0..561319b 100644
> --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> @@ -50,6 +50,7 @@
>  	compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
>
>  	aliases {
> +		ethernet0 = &gmac;
>  		serial0 = &uart0;
>  	};
>
> @@ -92,6 +93,22 @@
>  	status = "okay";
>  };
>
> +&gmac {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&gmac_rgmii_pins>;
> +	phy-handle = <&phy1>;
> +	phy-mode = "rgmii";
> +	phy-supply = <&reg_dc1sw>;
> +	status = "okay";
> +};
> +
> +&gmac_mdio {
> +	phy1: ethernet-phy@1 {
> +		compatible = "ethernet-phy-ieee802.3-c22";
> +		reg = <1>;
> +	};
> +};
> +
>  &i2c0 {
>  	status = "okay";
>
> @@ -133,6 +150,12 @@
>  	vcc-pg-supply = <&reg_dldo1>;
>  };
>
> +&reg_aldo2 {
> +	regulator-min-microvolt = <2500000>;
> +	regulator-max-microvolt = <2500000>;
> +	regulator-name = "vcc-pa";
> +};
> +

Shouldn't this one be added to the patch 2?

Thanks
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)