[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1556784606-3016-2-git-send-email-fabien.dessenne@st.com>
Date: Thu, 2 May 2019 10:09:59 +0200
From: Fabien Dessenne <fabien.dessenne@...com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
Ohad Ben-Cohen <ohad@...ery.com>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
<devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-remoteproc@...r.kernel.org>
CC: Fabien Dessenne <fabien.dessenne@...com>,
Loic Pallardy <loic.pallardy@...com>,
Arnaud Pouliquen <arnaud.pouliquen@...com>,
"Ludovic Barre" <ludovic.barre@...com>,
Benjamin Gaignard <benjamin.gaignard@...com>
Subject: [PATCH v3 1/8] dt-bindings: stm32: add bindings for ML-AHB interconnect
Document the ML-AHB interconnect for stm32 SoCs.
Signed-off-by: Fabien Dessenne <fabien.dessenne@...com>
---
.../devicetree/bindings/arm/stm32/mlahb.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/stm32/mlahb.txt
diff --git a/Documentation/devicetree/bindings/arm/stm32/mlahb.txt b/Documentation/devicetree/bindings/arm/stm32/mlahb.txt
new file mode 100644
index 0000000..3f5b779
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/stm32/mlahb.txt
@@ -0,0 +1,37 @@
+ML-AHB interconnect bindings
+
+These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects
+a Cortex-M subsystem with dedicated memories.
+The MCU SRAM and RETRAM memory parts can be accessed through different addresses
+(see "RAM aliases" in [1]) using different buses (see [2]) : balancing the
+Cortex-M firmware accesses among those ports allows to tune the system
+performance.
+
+[1]: https://www.st.com/resource/en/reference_manual/dm00327659.pdf
+[2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping
+
+Required properties:
+- compatible: should be "simple-bus"
+- dma-ranges: describes memory addresses translation between the local CPU and
+ the remote Cortex-M processor. Each memory region, is declared with
+ 3 parameters:
+ - param 1: device base address (Cortex-M processor address)
+ - param 2: physical base address (local CPU address)
+ - param 3: size of the memory region.
+
+The Cortex-M remote processor accessed via the mlahb interconnect is described
+by a child node.
+
+Example:
+mlahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-ranges = <0x00000000 0x38000000 0x10000>,
+ <0x10000000 0x10000000 0x60000>,
+ <0x30000000 0x30000000 0x60000>;
+
+ m4_rproc: m4@...00000 {
+ ...
+ };
+};
--
2.7.4
Powered by blists - more mailing lists