[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c1bc4831-ba63-fd51-9e0c-7c988096b1f4@centosproject.org>
Date: Thu, 2 May 2019 07:24:29 -0300
From: Pablo Sebastián Greco <pgreco@...tosproject.org>
To: maxime.ripard@...tlin.com
Cc: linux-sunxi@...glegroups.com, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Chen-Yu Tsai <wens@...e.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [linux-sunxi] Re: [PATCH v5 2/7] ARM: dts: sun8i: v40:
bananapi-m2-berry: Add GPIO pin-bank regulator supplies
El 2/5/19 a las 04:38, Maxime Ripard escribió:
> On Tue, Apr 23, 2019 at 02:25:59PM -0300, Pablo Greco wrote:
>> The bananapi-m2-berry has the PMIC providing voltage to all the pin-bank
>> supply rails from its various regulator outputs, tie them to the pio
>> node.
>>
>> Signed-off-by: Pablo Greco <pgreco@...tosproject.org>
>> ---
>> arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> index f05cabd..2cb2ce0 100644
>> --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> @@ -123,6 +123,16 @@
>> status = "okay";
>> };
>>
>> +&pio {
>> + pinctrl-names = "default";
> A pinctrl-names property without any other one?
>
> Looks good otherwise, thanks
> Maxime
Right, I'll move this to the patch that adds pinctrl-0
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
Pablo
Powered by blists - more mailing lists