[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1556804030-25291-1-git-send-email-pgreco@centosproject.org>
Date: Thu, 2 May 2019 10:33:44 -0300
From: Pablo Greco <pgreco@...tosproject.org>
To: linux-sunxi@...glegroups.com
Cc: Pablo Greco <pgreco@...tosproject.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v6 0/5] ARM: dts: sun8i: v40 Rewrite BPi M2 Berry DTS based on BPi M2 Ultra
BPi M2 Berry is a trimmed down version of the BPi M2 Ultra, completely
software compatible.
Changes include:
- 2GiB -> 1GiB
- no eMMC
- no onboard microphone
- no IR
- no blue LED
- no charging (and power jack to USB)
- dropped USB2 and connect USB1 to a 4-port HUB.
Changes in v6:
- Removed patch already queued for 5.3
- Reworked which nodes are added according to the new patch order
- Squashed bt and wifi patches
Changes in v5:
- Changed commit order
- Removed regulator-always-on from gpio regulators
- Copied commit log for the bluetooth node from the m2-ultra
Changes in v4:
- Went back to v2
- Added GPIO pin-bank regulators (both m2-ultra and m2-berry)
Changes in v3:
- Removed "Sort device node dereferences" (already applied)
- Added basic pio node
- Tied GMAC regulators to the pio (both m2-ultra and m2-berry)
Changes in v2:
- Split into smaller patches
Pablo Greco (5):
ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator
supplies
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet
controller
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 123 ++++++++++++++++++++++
1 file changed, 123 insertions(+)
--
1.8.3.1
Powered by blists - more mailing lists