| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190503130825.GI32400@ulmo>
Date: Fri, 3 May 2019 15:08:25 +0200
From: Thierry Reding <thierry.reding@...il.com>
To: Vidya Sagar <vidyas@...dia.com>
Cc: lorenzo.pieralisi@....com, bhelgaas@...gle.com, robh+dt@...nel.org,
mark.rutland@....com, jonathanh@...dia.com, kishon@...com,
catalin.marinas@....com, will.deacon@....com, jingoohan1@...il.com,
gustavo.pimentel@...opsys.com, mperttunen@...dia.com,
linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, kthota@...dia.com,
mmaddireddy@...dia.com, sagar.tv@...il.com
Subject: Re: [PATCH V5 15/16] PCI: tegra: Add Tegra194 PCIe support
On Wed, Apr 24, 2019 at 10:50:03AM +0530, Vidya Sagar wrote:
> Add support for Synopsys DesignWare core IP based PCIe host controller
> present in Tegra194 SoC.
>
> Signed-off-by: Vidya Sagar <vidyas@...dia.com>
> ---
> Changes since [v4]:
> * None
>
> Changes since [v3]:
> * None
>
> Changes since [v2]:
> * Changed 'nvidia,init-speed' to 'nvidia,init-link-speed'
> * Changed 'nvidia,pex-wake' to 'nvidia,wake-gpios'
> * Removed .runtime_suspend() & .runtime_resume() implementations
>
> Changes since [v1]:
> * Made CONFIG_PCIE_TEGRA194 as 'm' by default from its previous 'y' state
> * Modified code as per changes made to DT documentation
> * Refactored code to address Bjorn & Thierry's review comments
> * Added goto to avoid recursion in tegra_pcie_dw_host_init() API
> * Merged .scan_bus() of dw_pcie_host_ops implementation to tegra_pcie_dw_host_init() API
>
> drivers/pci/controller/dwc/Kconfig | 11 +
> drivers/pci/controller/dwc/Makefile | 1 +
> drivers/pci/controller/dwc/pcie-tegra194.c | 1760 ++++++++++++++++++++
> 3 files changed, 1772 insertions(+)
> create mode 100644 drivers/pci/controller/dwc/pcie-tegra194.c
>
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index b450ad2823a5..f9992b6c5bf7 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -232,4 +232,15 @@ config PCIE_UNIPHIER
> Say Y here if you want PCIe controller support on UniPhier SoCs.
> This driver supports LD20 and PXs3 SoCs.
>
> +config PCIE_TEGRA194
Should this perhaps be sorted alphabetically?
> + tristate "NVIDIA Tegra (T194) PCIe controller"
Something like "NVIDIA Tegra194 (and later) PCIe controller" is perhaps
more futureproof. I'm not sure if we're actually planning to use this in
future chips, but I think it's not far-fetched.
Also, please avoid the T194 abbreviation. We've been trying to be
consistent in the spelling to make it easier to grep for Tegra related
bits of code. It's easy to grep for something like 'Tegra[0-9]*', but
try 'T[0-9]*' and you're in for a bad surprise.
> + depends on TEGRA_BPMP && (ARCH_TEGRA || COMPILE_TEST)
This is rather pointless. TEGRA_BPMP doesn't have a COMPILE_TEST
dependency, so we're effectively limiting this to ARCH_TEGRA anyway.
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIE_DW_HOST
> + select PHY_TEGRA194_PCIE_P2U
> + default m
This is slightly odd. Might be better to just leave this away (so that
it defaults to n) and enable this via the defconfig.
> + help
> + Say Y here if you want support for DesignWare core based PCIe host
> + controller found in NVIDIA Tegra T194 SoC.
"NVIDIA Tegra194" is the canonical name for the SoC, at least in
upstream.
> +
> endmenu
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index b5f3b83cc2b3..4362f0ea89ac 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
> obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
> obj-$(CONFIG_PCI_MESON) += pci-meson.o
> obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
> +obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
Should this be sorted alphabetically?
>
> # The following drivers are for devices that use the generic ACPI
> # pci_root.c driver but don't support standard ECAM config access.
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> new file mode 100644
> index 000000000000..937038faebe5
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -0,0 +1,1760 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * PCIe host controller driver for Tegra T194 SoC
NVIDIA Tegra194 for consistency.
> + *
> + * Copyright (C) 2019 NVIDIA Corporation.
> + *
> + * Author: Vidya Sagar <vidyas@...dia.com>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/debugfs.h>
> +#include <linux/delay.h>
> +#include <linux/gpio.h>
> +#include <linux/interrupt.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/kfifo.h>
> +#include <linux/kthread.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_pci.h>
> +#include <linux/pci.h>
> +#include <linux/pci-aspm.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/random.h>
> +#include <linux/reset.h>
> +#include <linux/resource.h>
> +#include <linux/types.h>
> +#include "pcie-designware.h"
> +#include <soc/tegra/bpmp.h>
> +#include <soc/tegra/bpmp-abi.h>
> +#include "../../pci.h"
> +#include "../../pcie/portdrv.h"
> +
> +#define dw_pcie_to_tegra_pcie(x) container_of(x, struct tegra_pcie_dw, pci)
This is usually better as a static inline because GCC produces better
warnings if you use it wrongly.
Also, you use this quite frequently, so perhaps drop the dw_pcie_ prefix
that's already implied?
> +
> +#define CTRL_5 5
> +
> +#define APPL_PINMUX 0x0
> +#define APPL_PINMUX_PEX_RST BIT(0)
> +#define APPL_PINMUX_CLKREQ_OVERRIDE_EN BIT(2)
> +#define APPL_PINMUX_CLKREQ_OVERRIDE BIT(3)
> +#define APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE_EN BIT(4)
> +#define APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE BIT(5)
> +#define APPL_PINMUX_CLKREQ_OUT_OVRD_EN BIT(9)
> +#define APPL_PINMUX_CLKREQ_OUT_OVRD BIT(10)
> +
> +#define APPL_CTRL 0x4
> +#define APPL_CTRL_SYS_PRE_DET_STATE BIT(6)
> +#define APPL_CTRL_LTSSM_EN BIT(7)
> +#define APPL_CTRL_HW_HOT_RST_EN BIT(20)
> +#define APPL_CTRL_HW_HOT_RST_MODE_MASK GENMASK(1, 0)
> +#define APPL_CTRL_HW_HOT_RST_MODE_SHIFT 22
> +#define APPL_CTRL_HW_HOT_RST_MODE_IMDT_RST 0x1
> +
> +#define APPL_INTR_EN_L0_0 0x8
> +#define APPL_INTR_EN_L0_0_LINK_STATE_INT_EN BIT(0)
> +#define APPL_INTR_EN_L0_0_MSI_RCV_INT_EN BIT(4)
> +#define APPL_INTR_EN_L0_0_INT_INT_EN BIT(8)
> +#define APPL_INTR_EN_L0_0_CDM_REG_CHK_INT_EN BIT(19)
> +#define APPL_INTR_EN_L0_0_SYS_INTR_EN BIT(30)
> +#define APPL_INTR_EN_L0_0_SYS_MSI_INTR_EN BIT(31)
> +
> +#define APPL_INTR_STATUS_L0 0xC
> +#define APPL_INTR_STATUS_L0_LINK_STATE_INT BIT(0)
> +#define APPL_INTR_STATUS_L0_INT_INT BIT(8)
> +#define APPL_INTR_STATUS_L0_CDM_REG_CHK_INT BIT(18)
> +
> +#define APPL_INTR_EN_L1_0_0 0x1C
> +#define APPL_INTR_EN_L1_0_0_LINK_REQ_RST_NOT_INT_EN BIT(1)
> +
> +#define APPL_INTR_STATUS_L1_0_0 0x20
> +#define APPL_INTR_STATUS_L1_0_0_LINK_REQ_RST_NOT_CHGED BIT(1)
> +
> +#define APPL_INTR_STATUS_L1_1 0x2C
> +#define APPL_INTR_STATUS_L1_2 0x30
> +#define APPL_INTR_STATUS_L1_3 0x34
> +#define APPL_INTR_STATUS_L1_6 0x3C
> +#define APPL_INTR_STATUS_L1_7 0x40
> +
> +#define APPL_INTR_EN_L1_8_0 0x44
> +#define APPL_INTR_EN_L1_8_BW_MGT_INT_EN BIT(2)
> +#define APPL_INTR_EN_L1_8_AUTO_BW_INT_EN BIT(3)
> +#define APPL_INTR_EN_L1_8_INTX_EN BIT(11)
> +#define APPL_INTR_EN_L1_8_AER_INT_EN BIT(15)
> +
> +#define APPL_INTR_STATUS_L1_8_0 0x4C
> +#define APPL_INTR_STATUS_L1_8_0_EDMA_INT_MASK GENMASK(11, 6)
> +#define APPL_INTR_STATUS_L1_8_0_BW_MGT_INT_STS BIT(2)
> +#define APPL_INTR_STATUS_L1_8_0_AUTO_BW_INT_STS BIT(3)
> +
> +#define APPL_INTR_STATUS_L1_9 0x54
> +#define APPL_INTR_STATUS_L1_10 0x58
> +#define APPL_INTR_STATUS_L1_11 0x64
> +#define APPL_INTR_STATUS_L1_13 0x74
> +#define APPL_INTR_STATUS_L1_14 0x78
> +#define APPL_INTR_STATUS_L1_15 0x7C
> +#define APPL_INTR_STATUS_L1_17 0x88
> +
> +#define APPL_INTR_EN_L1_18 0x90
> +#define APPL_INTR_EN_L1_18_CDM_REG_CHK_CMPLT BIT(2)
> +#define APPL_INTR_EN_L1_18_CDM_REG_CHK_CMP_ERR BIT(1)
> +#define APPL_INTR_EN_L1_18_CDM_REG_CHK_LOGIC_ERR BIT(0)
> +
> +#define APPL_INTR_STATUS_L1_18 0x94
> +#define APPL_INTR_STATUS_L1_18_CDM_REG_CHK_CMPLT BIT(2)
> +#define APPL_INTR_STATUS_L1_18_CDM_REG_CHK_CMP_ERR BIT(1)
> +#define APPL_INTR_STATUS_L1_18_CDM_REG_CHK_LOGIC_ERR BIT(0)
> +
> +#define APPL_MSI_CTRL_2 0xB0
> +
> +#define APPL_LTR_MSG_1 0xC4
> +#define LTR_MSG_REQ BIT(15)
> +#define LTR_MST_NO_SNOOP_SHIFT 16
> +
> +#define APPL_LTR_MSG_2 0xC8
> +#define APPL_LTR_MSG_2_LTR_MSG_REQ_STATE BIT(3)
> +
> +#define APPL_LINK_STATUS 0xCC
> +#define APPL_LINK_STATUS_RDLH_LINK_UP BIT(0)
> +
> +#define APPL_DEBUG 0xD0
> +#define APPL_DEBUG_PM_LINKST_IN_L2_LAT BIT(21)
> +#define APPL_DEBUG_PM_LINKST_IN_L0 0x11
> +#define APPL_DEBUG_LTSSM_STATE_MASK GENMASK(8, 3)
> +#define APPL_DEBUG_LTSSM_STATE_SHIFT 3
> +#define LTSSM_STATE_PRE_DETECT 5
> +
> +#define APPL_RADM_STATUS 0xE4
> +#define APPL_PM_XMT_TURNOFF_STATE BIT(0)
> +
> +#define APPL_DM_TYPE 0x100
> +#define APPL_DM_TYPE_MASK GENMASK(3, 0)
> +#define APPL_DM_TYPE_RP 0x4
> +#define APPL_DM_TYPE_EP 0x0
> +
> +#define APPL_CFG_BASE_ADDR 0x104
> +#define APPL_CFG_BASE_ADDR_MASK GENMASK(31, 12)
> +
> +#define APPL_CFG_IATU_DMA_BASE_ADDR 0x108
> +#define APPL_CFG_IATU_DMA_BASE_ADDR_MASK GENMASK(31, 18)
> +
> +#define APPL_CFG_MISC 0x110
> +#define APPL_CFG_MISC_SLV_EP_MODE BIT(14)
> +#define APPL_CFG_MISC_ARCACHE_MASK GENMASK(13, 10)
> +#define APPL_CFG_MISC_ARCACHE_SHIFT 10
> +#define APPL_CFG_MISC_ARCACHE_VAL 3
> +
> +#define APPL_CFG_SLCG_OVERRIDE 0x114
> +#define APPL_CFG_SLCG_OVERRIDE_SLCG_EN_MASTER BIT(0)
> +
> +#define APPL_CAR_RESET_OVRD 0x12C
> +#define APPL_CAR_RESET_OVRD_CYA_OVERRIDE_CORE_RST_N BIT(0)
> +
> +#define IO_BASE_IO_DECODE BIT(0)
> +#define IO_BASE_IO_DECODE_BIT8 BIT(8)
> +
> +#define CFG_PREF_MEM_LIMIT_BASE_MEM_DECODE BIT(0)
> +#define CFG_PREF_MEM_LIMIT_BASE_MEM_LIMIT_DECODE BIT(16)
> +
> +#define CFG_LINK_CAP 0x7C
> +
> +#define CFG_DEV_STATUS_CONTROL 0x78
> +#define CFG_DEV_STATUS_CONTROL_MPS_SHIFT 5
> +
> +#define CFG_LINK_CONTROL 0x80
> +
> +#define CFG_LINK_STATUS 0x82
> +
> +#define CFG_LINK_CONTROL_2 0xA0
> +
> +#define CFG_LINK_STATUS_2 0xA2
> +#define CFG_LINK_STATUS_2_PCIE_CAP_EQ_CPL BIT(17)
> +
> +#define CFG_TIMER_CTRL_MAX_FUNC_NUM_OFF 0x718
> +#define CFG_TIMER_CTRL_ACK_NAK_SHIFT (19)
> +
> +#define PCI_L1SS_CAP_CM_RTM_SHIFT 8 /* Common mode restore mask */
> +#define PCI_L1SS_CAP_PWRN_VAL_SHIFT 19 /* T_POWER_ON val shift */
These seem to not fit here. What register do these fields belong to?
> +
> +#define EVENT_COUNTER_ALL_CLEAR 0x3
> +#define EVENT_COUNTER_ENABLE_ALL 0x7
> +#define EVENT_COUNTER_ENABLE_SHIFT 2
> +#define EVENT_COUNTER_EVENT_SEL_MASK GENMASK(7, 0)
> +#define EVENT_COUNTER_EVENT_SEL_SHIFT 16
> +#define EVENT_COUNTER_EVENT_Tx_L0S 0x2
> +#define EVENT_COUNTER_EVENT_Rx_L0S 0x3
> +#define EVENT_COUNTER_EVENT_L1 0x5
> +#define EVENT_COUNTER_EVENT_L1_1 0x7
> +#define EVENT_COUNTER_EVENT_L1_2 0x8
> +#define EVENT_COUNTER_GROUP_SEL_SHIFT 24
> +#define EVENT_COUNTER_GROUP_5 0x5
> +
> +#define DL_FEATURE_EXCHANGE_EN BIT(31)
> +
> +#define PORT_LOGIC_ACK_F_ASPM_CTRL 0x70C
> +#define ENTER_ASPM BIT(30)
> +#define L0S_ENTRANCE_LAT_SHIFT 24
> +#define L0S_ENTRANCE_LAT_MASK GENMASK(26, 24)
> +#define L1_ENTRANCE_LAT_SHIFT 27
> +#define L1_ENTRANCE_LAT_MASK GENMASK(29, 27)
> +#define N_FTS_SHIFT 8
> +#define N_FTS_MASK GENMASK(7, 0)
> +#define N_FTS_VAL 52
> +
> +#define PORT_LOGIC_GEN2_CTRL 0x80C
> +#define PORT_LOGIC_GEN2_CTRL_DIRECT_SPEED_CHANGE BIT(17)
> +#define FTS_MASK GENMASK(7, 0)
> +#define FTS_VAL 52
> +
> +#define PORT_LOGIC_MSI_CTRL_INT_0_EN 0x828
> +
> +#define GEN3_EQ_CONTROL_OFF 0x8a8
> +#define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_SHIFT 8
> +#define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK GENMASK(23, 8)
> +#define GEN3_EQ_CONTROL_OFF_FB_MODE_MASK GENMASK(3, 0)
> +
> +#define GEN3_RELATED_OFF 0x890
> +#define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0)
> +#define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16)
> +#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24
> +#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24)
> +
> +#define PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT 0x8D0
> +#define AMBA_ERROR_RESPONSE_CRS_SHIFT 3
> +#define AMBA_ERROR_RESPONSE_CRS_MASK GENMASK(1, 0)
> +#define AMBA_ERROR_RESPONSE_CRS_OKAY 0
> +#define AMBA_ERROR_RESPONSE_CRS_OKAY_FFFFFFFF 1
> +#define AMBA_ERROR_RESPONSE_CRS_OKAY_FFFF0001 2
> +
> +#define PORT_LOGIC_MSIX_DOORBELL 0x948
> +
> +#define CAP_SPCIE_CAP_OFF 0x154
> +#define CAP_SPCIE_CAP_OFF_DSP_TX_PRESET0_MASK GENMASK(3, 0)
> +#define CAP_SPCIE_CAP_OFF_USP_TX_PRESET0_MASK GENMASK(11, 8)
> +#define CAP_SPCIE_CAP_OFF_USP_TX_PRESET0_SHIFT 8
> +
> +#define PL16G_CAP_OFF 0x188
> +#define PL16G_CAP_OFF_DSP_16G_TX_PRESET_MASK GENMASK(3, 0)
> +#define PL16G_CAP_OFF_USP_16G_TX_PRESET_MASK GENMASK(7, 4)
> +#define PL16G_CAP_OFF_USP_16G_TX_PRESET_SHIFT 4
> +
> +#define PME_ACK_TIMEOUT 10000
> +
> +#define LTSSM_TIMEOUT 50000 /* 50ms */
> +
> +#define GEN3_GEN4_EQ_PRESET_INIT 5
> +
> +#define GEN1_CORE_CLK_FREQ 62500000
> +#define GEN2_CORE_CLK_FREQ 125000000
> +#define GEN3_CORE_CLK_FREQ 250000000
> +#define GEN4_CORE_CLK_FREQ 500000000
> +
> +static unsigned int pcie_gen_freq[] = {
> + GEN1_CORE_CLK_FREQ,
> + GEN2_CORE_CLK_FREQ,
> + GEN3_CORE_CLK_FREQ,
> + GEN4_CORE_CLK_FREQ
> +};
> +
> +static u32 event_cntr_ctrl_offset[] = {
> + 0x1d8,
> + 0x1a8,
> + 0x1a8,
> + 0x1a8,
> + 0x1c4,
> + 0x1d8
> +};
> +
> +static u32 event_cntr_data_offset[] = {
> + 0x1dc,
> + 0x1ac,
> + 0x1ac,
> + 0x1ac,
> + 0x1c8,
> + 0x1dc
> +};
I think all of the above structures are only ever read, so they can be
const.
> +
> +struct tegra_pcie_dw {
> + struct device *dev;
> + struct resource *appl_res;
> + struct resource *dbi_res;
> + struct resource *atu_dma_res;
> + void __iomem *appl_base;
> + struct clk *core_clk;
> + struct reset_control *core_apb_rst;
> + struct reset_control *core_rst;
> + struct dw_pcie pci;
> + enum dw_pcie_device_mode mode;
> +
> + bool supports_clkreq;
> + u8 init_link_width;
> + bool link_state;
> + u32 msi_ctrl_int;
> + u32 num_lanes;
> + u32 max_speed;
> + u32 init_speed;
> + u32 cid;
> + int pex_wake;
> + bool update_fc_fixup;
> + u32 cfg_link_cap_l1sub;
> + u32 aspm_cmrt;
> + u32 aspm_pwr_on_t;
> + u32 aspm_l0s_enter_lat;
> + u32 disabled_aspm_states;
> +
> + struct regulator *pex_ctl_reg;
I read this as "PEX control register" just by looking at the name.
Perhaps call this "pex_ctl_supply" to make it more obvious from the name
what this is?
> +
> + int phy_count;
unsigned int?
> + struct phy **phy;
> +
> + struct dentry *debugfs;
> +};
The padding in this structure is inconsistent. A single space between
type and variable name would help and doesn't really negatively impact
readability, in my opinion.
> +
> +struct tegra_pcie_of_data {
> + enum dw_pcie_device_mode mode;
> +};
_of_data makes it sound like this data is parsed from device tree. We
often use _soc in other drivers to avoid this ambiguity and make it
clear that we're referring to SoC specific data.
> +
> +static void apply_bad_link_workaround(struct pcie_port *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct tegra_pcie_dw *pcie = dw_pcie_to_tegra_pcie(pci);
> + u16 val;
> +
> + /*
> + * NOTE:- Since this scenario is uncommon and link as such is not
> + * stable anyway, not waiting to confirm if link is really
> + * transitioning to Gen-2 speed
> + */
> + val = dw_pcie_readw_dbi(pci, CFG_LINK_STATUS);
> + if (val & PCI_EXP_LNKSTA_LBMS) {
> + if (pcie->init_link_width >
> + (val & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT) {
This is really hard to digest. Perhaps use a temporary variable to store
the result (link_width?) and then use that in the comparison to make it
immediately obvious what you're doing here?
> + dev_warn(pci->dev, "PCIe link is bad, width reduced\n");
> + val = dw_pcie_readw_dbi(pci, CFG_LINK_CONTROL_2);
> + val &= ~PCI_EXP_LNKCTL2_TLS;
> + val |= PCI_EXP_LNKCTL2_TLS_2_5GT;
> + dw_pcie_writew_dbi(pci, CFG_LINK_CONTROL_2, val);
> +
> + val = dw_pcie_readw_dbi(pci, CFG_LINK_CONTROL);
> + val |= PCI_EXP_LNKCTL_RL;
> + dw_pcie_writew_dbi(pci, CFG_LINK_CONTROL, val);
> + }
> + }
> +}
> +
> +static irqreturn_t tegra_pcie_rp_irq_handler(struct tegra_pcie_dw *pcie)
> +{
> + struct dw_pcie *pci = &pcie->pci;
> + struct pcie_port *pp = &pci->pp;
> + u32 val, tmp;
> + u16 val_w;
> +
> + val = readl(pcie->appl_base + APPL_INTR_STATUS_L0);
> + dev_dbg(pci->dev, "APPL_INTR_STATUS_L0 = 0x%08X\n", val);
> + if (val & APPL_INTR_STATUS_L0_LINK_STATE_INT) {
> + val = readl(pcie->appl_base + APPL_INTR_STATUS_L1_0_0);
> + dev_dbg(pci->dev, "APPL_INTR_STATUS_L1_0_0 = 0x%08X\n", val);
> + if (val & APPL_INTR_STATUS_L1_0_0_LINK_REQ_RST_NOT_CHGED) {
> + writel(val, pcie->appl_base + APPL_INTR_STATUS_L1_0_0);
> +
> + /* SBR & Surprise Link Down WAR */
> + val = readl(pcie->appl_base + APPL_CAR_RESET_OVRD);
> + val &= ~APPL_CAR_RESET_OVRD_CYA_OVERRIDE_CORE_RST_N;
> + writel(val, pcie->appl_base + APPL_CAR_RESET_OVRD);
> + udelay(1);
> + val = readl(pcie->appl_base + APPL_CAR_RESET_OVRD);
> + val |= APPL_CAR_RESET_OVRD_CYA_OVERRIDE_CORE_RST_N;
> + writel(val, pcie->appl_base + APPL_CAR_RESET_OVRD);
> +
> + val = dw_pcie_readl_dbi(pci, PORT_LOGIC_GEN2_CTRL);
> + val |= PORT_LOGIC_GEN2_CTRL_DIRECT_SPEED_CHANGE;
> + dw_pcie_writel_dbi(pci, PORT_LOGIC_GEN2_CTRL, val);
> + }
> + }
> + if (val & APPL_INTR_STATUS_L0_INT_INT) {
> + val = readl(pcie->appl_base + APPL_INTR_STATUS_L1_8_0);
> + dev_dbg(pci->dev, "APPL_INTR_STATUS_L1_8_0 = 0x%08X\n", val);
> + if (val & APPL_INTR_STATUS_L1_8_0_AUTO_BW_INT_STS) {
> + writel(APPL_INTR_STATUS_L1_8_0_AUTO_BW_INT_STS,
> + pcie->appl_base + APPL_INTR_STATUS_L1_8_0);
> + apply_bad_link_workaround(pp);
> + }
> + if (val & APPL_INTR_STATUS_L1_8_0_BW_MGT_INT_STS) {
> + writel(APPL_INTR_STATUS_L1_8_0_BW_MGT_INT_STS,
> + pcie->appl_base + APPL_INTR_STATUS_L1_8_0);
> +
> + val_w = dw_pcie_readw_dbi(pci, CFG_LINK_STATUS);
> + dev_dbg(pci->dev, "Link Speed : Gen-%u\n", val_w &
> + PCI_EXP_LNKSTA_CLS);
> + }
> + }
> + val = readl(pcie->appl_base + APPL_INTR_STATUS_L0);
> + if (val & APPL_INTR_STATUS_L0_CDM_REG_CHK_INT) {
> + val = readl(pcie->appl_base + APPL_INTR_STATUS_L1_18);
> + tmp = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS);
> + dev_dbg(pci->dev, "APPL_INTR_STATUS_L1_18 = 0x%08X\n", val);
> + if (val & APPL_INTR_STATUS_L1_18_CDM_REG_CHK_CMPLT) {
> + dev_err(pci->dev, "CDM check complete\n");
> + tmp |= PCIE_PL_CHK_REG_CHK_REG_COMPLETE;
> + }
> + if (val & APPL_INTR_STATUS_L1_18_CDM_REG_CHK_CMP_ERR) {
> + dev_err(pci->dev, "CDM comparison mismatch\n");
> + tmp |= PCIE_PL_CHK_REG_CHK_REG_COMPARISON_ERROR;
> + }
> + if (val & APPL_INTR_STATUS_L1_18_CDM_REG_CHK_LOGIC_ERR) {
> + dev_err(pci->dev, "CDM Logic error\n");
> + tmp |= PCIE_PL_CHK_REG_CHK_REG_LOGIC_ERROR;
> + }
> + dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, tmp);
> + tmp = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_ERR_ADDR);
> + dev_err(pci->dev, "CDM Error Address Offset = 0x%08X\n", tmp);
> + }
Nit: I find htis hard to follow because of all the debug and error
messages interspersed with code. Is there any way you can perhaps
unclutter this? Perhaps move all the output code into a single block? Or
perhaps resort to some whitespace to help structure this differently?
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t tegra_pcie_irq_handler(int irq, void *arg)
> +{
> + struct tegra_pcie_dw *pcie = (struct tegra_pcie_dw *)arg;
> +
> + if (pcie->mode == DW_PCIE_RC_TYPE)
> + return tegra_pcie_rp_irq_handler(pcie);
> +
> + return IRQ_NONE;
> +}
> +
> +static int tegra_pcie_dw_rd_own_conf(struct pcie_port *pp, int where, int size,
> + u32 *val)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +
> + /*
> + * This is an endpoint mode specific register happen to appear even
> + * when controller is operating in root port mode and system hangs
> + * when it is accessed with link being in ASPM-L1 state.
> + * So skip accessing it altogether
> + */
> + if (where == PORT_LOGIC_MSIX_DOORBELL) {
> + *val = 0x00000000;
> + return PCIBIOS_SUCCESSFUL;
> + }
> +
> + return dw_pcie_read(pci->dbi_base + where, size, val);
> +}
> +
> +static int tegra_pcie_dw_wr_own_conf(struct pcie_port *pp, int where, int size,
> + u32 val)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +
> + /*
> + * This is an endpoint mode specific register happen to appear even
> + * when controller is operating in root port mode and system hangs
> + * when it is accessed with link being in ASPM-L1 state.
> + * So skip accessing it altogether
> + */
> + if (where == PORT_LOGIC_MSIX_DOORBELL)
> + return PCIBIOS_SUCCESSFUL;
> +
> + return dw_pcie_write(pci->dbi_base + where, size, val);
> +}
> +
> +#if defined(CONFIG_PCIEASPM)
> +static void disable_aspm_l0s(struct tegra_pcie_dw *pcie)
> +{
> + u32 val;
> +
> + val = dw_pcie_readl_dbi(&pcie->pci, CFG_LINK_CAP);
> + val &= ~(PCI_EXP_LNKCTL_ASPM_L0S << 10);
> + dw_pcie_writel_dbi(&pcie->pci, CFG_LINK_CAP, val);
> +}
> +
> +static void disable_aspm_l10(struct tegra_pcie_dw *pcie)
> +{
> + u32 val;
> +
> + val = dw_pcie_readl_dbi(&pcie->pci, CFG_LINK_CAP);
> + val &= ~(PCI_EXP_LNKCTL_ASPM_L1 << 10);
> + dw_pcie_writel_dbi(&pcie->pci, CFG_LINK_CAP, val);
> +}
> +
> +static void disable_aspm_l11(struct tegra_pcie_dw *pcie)
> +{
> + u32 val;
> +
> + val = dw_pcie_readl_dbi(&pcie->pci, pcie->cfg_link_cap_l1sub);
> + val &= ~PCI_L1SS_CAP_ASPM_L1_1;
> + dw_pcie_writel_dbi(&pcie->pci, pcie->cfg_link_cap_l1sub, val);
> +}
> +
> +static void disable_aspm_l12(struct tegra_pcie_dw *pcie)
> +{
> + u32 val;
> +
> + val = dw_pcie_readl_dbi(&pcie->pci, pcie->cfg_link_cap_l1sub);
> + val &= ~PCI_L1SS_CAP_ASPM_L1_2;
> + dw_pcie_writel_dbi(&pcie->pci, pcie->cfg_link_cap_l1sub, val);
> +}
> +
> +static inline u32 event_counter_prog(struct tegra_pcie_dw *pcie, u32 event)
> +{
> + u32 val;
> +
> + val = dw_pcie_readl_dbi(&pcie->pci, event_cntr_ctrl_offset[pcie->cid]);
> + val &= ~(EVENT_COUNTER_EVENT_SEL_MASK << EVENT_COUNTER_EVENT_SEL_SHIFT);
> + val |= EVENT_COUNTER_GROUP_5 << EVENT_COUNTER_GROUP_SEL_SHIFT;
> + val |= event << EVENT_COUNTER_EVENT_SEL_SHIFT;
> + val |= EVENT_COUNTER_ENABLE_ALL << EVENT_COUNTER_ENABLE_SHIFT;
> + dw_pcie_writel_dbi(&pcie->pci, event_cntr_ctrl_offset[pcie->cid], val);
> + val = dw_pcie_readl_dbi(&pcie->pci, event_cntr_data_offset[pcie->cid]);
> + return val;
> +}
> +
> +static int aspm_state_cnt(struct seq_file *s, void *data)
> +{
> + struct tegra_pcie_dw *pcie = (struct tegra_pcie_dw *)(s->private);
> + u32 val;
> +
> + seq_printf(s, "Tx L0s entry count : %u\n",
> + event_counter_prog(pcie, EVENT_COUNTER_EVENT_Tx_L0S));
> +
> + seq_printf(s, "Rx L0s entry count : %u\n",
> + event_counter_prog(pcie, EVENT_COUNTER_EVENT_Rx_L0S));
> +
> + seq_printf(s, "Link L1 entry count : %u\n",
> + event_counter_prog(pcie, EVENT_COUNTER_EVENT_L1));
> +
> + seq_printf(s, "Link L1.1 entry count : %u\n",
> + event_counter_prog(pcie, EVENT_COUNTER_EVENT_L1_1));
> +
> + seq_printf(s, "Link L1.2 entry count : %u\n",
> + event_counter_prog(pcie, EVENT_COUNTER_EVENT_L1_2));
> +
> + /* Clear all counters */
> + dw_pcie_writel_dbi(&pcie->pci, event_cntr_ctrl_offset[pcie->cid],
> + EVENT_COUNTER_ALL_CLEAR);
> +
> + /* Re-enable counting */
> + val = EVENT_COUNTER_ENABLE_ALL << EVENT_COUNTER_ENABLE_SHIFT;
> + val |= EVENT_COUNTER_GROUP_5 << EVENT_COUNTER_GROUP_SEL_SHIFT;
> + dw_pcie_writel_dbi(&pcie->pci, event_cntr_ctrl_offset[pcie->cid], val);
> +
> + return 0;
> +}
> +
> +#define DEFINE_ENTRY(__name) \
> +static int __name ## _open(struct inode *inode, struct file *file) \
> +{ \
> + return single_open(file, __name, inode->i_private); \
> +} \
> +static const struct file_operations __name ## _fops = { \
> + .open = __name ## _open, \
> + .read = seq_read, \
> + .llseek = seq_lseek, \
> + .release = single_release, \
> +}
> +
> +DEFINE_ENTRY(aspm_state_cnt);
> +#endif
Perhaps use debugfs_create_devm_seqfile()? Looks like that does
everything you need here.
> +
> +static int init_debugfs(struct tegra_pcie_dw *pcie)
> +{
> +#if defined(CONFIG_PCIEASPM)
> + struct dentry *d;
> +
> + d = debugfs_create_file("aspm_state_cnt", 0444, pcie->debugfs,
> + (void *)pcie, &aspm_state_cnt_fops);
> + if (!d)
> + dev_err(pcie->dev, "debugfs for aspm_state_cnt failed\n");
> +#endif
> + return 0;
> +}
> +
> +static void tegra_pcie_enable_system_interrupts(struct pcie_port *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct tegra_pcie_dw *pcie = dw_pcie_to_tegra_pcie(pci);
> + u32 val;
> + u16 val_w;
> +
> + val = readl(pcie->appl_base + APPL_INTR_EN_L0_0);
> + val |= APPL_INTR_EN_L0_0_LINK_STATE_INT_EN;
> + writel(val, pcie->appl_base + APPL_INTR_EN_L0_0);
> +
> + val = readl(pcie->appl_base + APPL_INTR_EN_L1_0_0);
> + val |= APPL_INTR_EN_L1_0_0_LINK_REQ_RST_NOT_INT_EN;
> + writel(val, pcie->appl_base + APPL_INTR_EN_L1_0_0);
> +
> + if (of_property_read_bool(pci->dev->of_node, "cdm-check")) {
> + val = readl(pcie->appl_base + APPL_INTR_EN_L0_0);
> + val |= APPL_INTR_EN_L0_0_CDM_REG_CHK_INT_EN;
> + writel(val, pcie->appl_base + APPL_INTR_EN_L0_0);
> +
> + val = readl(pcie->appl_base + APPL_INTR_EN_L1_18);
> + val |= APPL_INTR_EN_L1_18_CDM_REG_CHK_CMP_ERR;
> + val |= APPL_INTR_EN_L1_18_CDM_REG_CHK_LOGIC_ERR;
> + writel(val, pcie->appl_base + APPL_INTR_EN_L1_18);
> + }
> +
> + val_w = dw_pcie_readw_dbi(&pcie->pci, CFG_LINK_STATUS);
> + pcie->init_link_width = (val_w & PCI_EXP_LNKSTA_NLW) >>
> + PCI_EXP_LNKSTA_NLW_SHIFT;
> +
> + val_w = dw_pcie_readw_dbi(&pcie->pci, CFG_LINK_CONTROL);
> + val_w |= PCI_EXP_LNKCTL_LBMIE;
> + dw_pcie_writew_dbi(&pcie->pci, CFG_LINK_CONTROL, val_w);
> +}
> +
> +static void tegra_pcie_enable_legacy_interrupts(struct pcie_port *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct tegra_pcie_dw *pcie = dw_pcie_to_tegra_pcie(pci);
> + u32 val;
> +
> + /* Enable legacy interrupt generation */
> + val = readl(pcie->appl_base + APPL_INTR_EN_L0_0);
> + val |= APPL_INTR_EN_L0_0_SYS_INTR_EN;
> + val |= APPL_INTR_EN_L0_0_INT_INT_EN;
> + writel(val, pcie->appl_base + APPL_INTR_EN_L0_0);
> +
> + val = readl(pcie->appl_base + APPL_INTR_EN_L1_8_0);
> + val |= APPL_INTR_EN_L1_8_INTX_EN;
> + val |= APPL_INTR_EN_L1_8_AUTO_BW_INT_EN;
> + val |= APPL_INTR_EN_L1_8_BW_MGT_INT_EN;
> + if (IS_ENABLED(CONFIG_PCIEAER))
> + val |= APPL_INTR_EN_L1_8_AER_INT_EN;
> + writel(val, pcie->appl_base + APPL_INTR_EN_L1_8_0);
> +}
> +
> +static void tegra_pcie_enable_msi_interrupts(struct pcie_port *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct tegra_pcie_dw *pcie = dw_pcie_to_tegra_pcie(pci);
> + u32 val;
> +
> + dw_pcie_msi_init(pp);
> +
> + /* Enable MSI interrupt generation */
> + val = readl(pcie->appl_base + APPL_INTR_EN_L0_0);
> + val |= APPL_INTR_EN_L0_0_SYS_MSI_INTR_EN;
> + val |= APPL_INTR_EN_L0_0_MSI_RCV_INT_EN;
> + writel(val, pcie->appl_base + APPL_INTR_EN_L0_0);
> +}
> +
> +static void tegra_pcie_enable_interrupts(struct pcie_port *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct tegra_pcie_dw *pcie = dw_pcie_to_tegra_pcie(pci);
> +
> + /* Clear interrupt statuses before enabling interrupts */
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L0);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_0_0);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_1);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_2);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_3);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_6);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_7);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_8_0);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_9);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_10);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_11);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_13);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_14);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_15);
> + writel(0xFFFFFFFF, pcie->appl_base + APPL_INTR_STATUS_L1_17);
> +
> + tegra_pcie_enable_system_interrupts(pp);
> + tegra_pcie_enable_legacy_interrupts(pp);
> + if (IS_ENABLED(CONFIG_PCI_MSI))
> + tegra_pcie_enable_msi_interrupts(pp);
> +}
> +
> +static void config_gen3_gen4_eq_presets(struct tegra_pcie_dw *pcie)
> +{
> + struct dw_pcie *pci = &pcie->pci;
> + u32 val, offset;
> + int i;
unsigned int?
> +
> + /* Program init preset */
> + for (i = 0; i < pcie->num_lanes; i++) {
> + dw_pcie_read(pci->dbi_base + CAP_SPCIE_CAP_OFF
> + + (i * 2), 2, &val);
> + val &= ~CAP_SPCIE_CAP_OFF_DSP_TX_PRESET0_MASK;
> + val |= GEN3_GEN4_EQ_PRESET_INIT;
> + val &= ~CAP_SPCIE_CAP_OFF_USP_TX_PRESET0_MASK;
> + val |= (GEN3_GEN4_EQ_PRESET_INIT <<
> + CAP_SPCIE_CAP_OFF_USP_TX_PRESET0_SHIFT);
> + dw_pcie_write(pci->dbi_base + CAP_SPCIE_CAP_OFF
> + + (i * 2), 2, val);
> +
> + offset = dw_pcie_find_ext_capability(pci, PCI_EXT_CAP_ID_PL) +
> + PCI_PL_16GT_LE_CTRL;
Do we need to check for errors from this? Or is this guaranteed to
return a valid capability offset?
> + dw_pcie_read(pci->dbi_base + offset + i, 1, &val);
> + val &= ~PL16G_CAP_OFF_DSP_16G_TX_PRESET_MASK;
> + val |= GEN3_GEN4_EQ_PRESET_INIT;
> + val &= ~PL16G_CAP_OFF_USP_16G_TX_PRESET_MASK;
> + val |= (GEN3_GEN4_EQ_PRESET_INIT <<
> + PL16G_CAP_OFF_USP_16G_TX_PRESET_SHIFT);
> + dw_pcie_write(pci->dbi_base + offset + i, 1, val);
> + }
> +
> + val = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
> + val &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK;
> + dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, val);
> +
> + val = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
> + val &= ~GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK;
> + val |= (0x3ff << GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_SHIFT);
> + val &= ~GEN3_EQ_CONTROL_OFF_FB_MODE_MASK;
> + dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, val);
> +
> + val = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
> + val &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK;
> + val |= (0x1 << GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT);
> + dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, val);
> +
> + val = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
> + val &= ~GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK;
> + val |= (0x360 << GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_SHIFT);
> + val &= ~GEN3_EQ_CONTROL_OFF_FB_MODE_MASK;
> + dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, val);
> +
> + val = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
> + val &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK;
> + dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, val);
> +}
> +
> +static int tegra_pcie_dw_host_init(struct pcie_port *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct tegra_pcie_dw *pcie = dw_pcie_to_tegra_pcie(pci);
> + u32 val, tmp, offset, speed;
> + int count;
> + u16 val_w;
> +
> +core_init:
> + count = 200;
> +#if defined(CONFIG_PCIEASPM)
> + pcie->cfg_link_cap_l1sub =
> + dw_pcie_find_ext_capability(pci, PCI_EXT_CAP_ID_L1SS) +
> + PCI_L1SS_CAP;
Can you add some temporary variables to make this more readable?
Something like:
offset = dw_pcie_find_ext_capability(pci, PCI_EXT_CAP_ID_L1SS);
pcie->cfg_link_cap_l1sub = offset + PCI_L1SS_CAP;
> +#endif
> + val = dw_pcie_readl_dbi(pci, PCI_IO_BASE);
> + val &= ~(IO_BASE_IO_DECODE | IO_BASE_IO_DECODE_BIT8);
> + dw_pcie_writel_dbi(pci, PCI_IO_BASE, val);
> +
> + val = dw_pcie_readl_dbi(pci, PCI_PREF_MEMORY_BASE);
> + val |= CFG_PREF_MEM_LIMIT_BASE_MEM_DECODE;
> + val |= CFG_PREF_MEM_LIMIT_BASE_MEM_LIMIT_DECODE;
> + dw_pcie_writel_dbi(pci, PCI_PREF_MEMORY_BASE, val);
> +
> + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0);
> +
> + /* Configure FTS */
> + val = dw_pcie_readl_dbi(pci, PORT_LOGIC_ACK_F_ASPM_CTRL);
> + val &= ~(N_FTS_MASK << N_FTS_SHIFT);
> + val |= N_FTS_VAL << N_FTS_SHIFT;
> + dw_pcie_writel_dbi(pci, PORT_LOGIC_ACK_F_ASPM_CTRL, val);
> +
> + val = dw_pcie_readl_dbi(pci, PORT_LOGIC_GEN2_CTRL);
> + val &= ~FTS_MASK;
> + val |= FTS_VAL;
> + dw_pcie_writel_dbi(pci, PORT_LOGIC_GEN2_CTRL, val);
> +
> + /* Enable as 0xFFFF0001 response for CRS */
> + val = dw_pcie_readl_dbi(pci, PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT);
> + val &= ~(AMBA_ERROR_RESPONSE_CRS_MASK << AMBA_ERROR_RESPONSE_CRS_SHIFT);
> + val |= (AMBA_ERROR_RESPONSE_CRS_OKAY_FFFF0001 <<
> + AMBA_ERROR_RESPONSE_CRS_SHIFT);
> + dw_pcie_writel_dbi(pci, PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT, val);
> +
> + /* Set MPS to 256 in DEV_CTL */
> + val = dw_pcie_readl_dbi(pci, CFG_DEV_STATUS_CONTROL);
> + val &= ~PCI_EXP_DEVCTL_PAYLOAD;
> + val |= (1 << CFG_DEV_STATUS_CONTROL_MPS_SHIFT);
> + dw_pcie_writel_dbi(pci, CFG_DEV_STATUS_CONTROL, val);
> +
> + /* Configure Max Speed from DT */
> + if (pcie->max_speed && pcie->max_speed != -EINVAL) {
> + val = dw_pcie_readl_dbi(pci, CFG_LINK_CAP);
> + val &= ~PCI_EXP_LNKCAP_SLS;
> + val |= pcie->max_speed;
> + dw_pcie_writel_dbi(pci, CFG_LINK_CAP, val);
> + }
> +
> + val = dw_pcie_readw_dbi(pci, CFG_LINK_CONTROL_2);
> + val &= ~PCI_EXP_LNKCTL2_TLS;
> + val |= pcie->init_speed;
> + dw_pcie_writew_dbi(pci, CFG_LINK_CONTROL_2, val);
> +
> + /* Configure Max lane width from DT */
> + val = dw_pcie_readl_dbi(pci, CFG_LINK_CAP);
> + val &= ~PCI_EXP_LNKCAP_MLW;
> + val |= (pcie->num_lanes << PCI_EXP_LNKSTA_NLW_SHIFT);
> + dw_pcie_writel_dbi(pci, CFG_LINK_CAP, val);
> +
> + config_gen3_gen4_eq_presets(pcie);
> +
> +#if defined(CONFIG_PCIEASPM)
> + /* Enable ASPM counters */
> + val = EVENT_COUNTER_ENABLE_ALL << EVENT_COUNTER_ENABLE_SHIFT;
> + val |= EVENT_COUNTER_GROUP_5 << EVENT_COUNTER_GROUP_SEL_SHIFT;
> + dw_pcie_writel_dbi(pci, event_cntr_ctrl_offset[pcie->cid], val);
> +
> + /* Program T_cmrt and T_pwr_on values */
> + val = dw_pcie_readl_dbi(pci, pcie->cfg_link_cap_l1sub);
> + val &= ~(PCI_L1SS_CAP_CM_RESTORE_TIME | PCI_L1SS_CAP_P_PWR_ON_VALUE);
> + val |= (pcie->aspm_cmrt << PCI_L1SS_CAP_CM_RTM_SHIFT);
> + val |= (pcie->aspm_pwr_on_t << PCI_L1SS_CAP_PWRN_VAL_SHIFT);
> + dw_pcie_writel_dbi(pci, pcie->cfg_link_cap_l1sub, val);
> +
> + /* Program L0s and L1 entrance latencies */
> + val = dw_pcie_readl_dbi(pci, PORT_LOGIC_ACK_F_ASPM_CTRL);
> + val &= ~L0S_ENTRANCE_LAT_MASK;
> + val |= (pcie->aspm_l0s_enter_lat << L0S_ENTRANCE_LAT_SHIFT);
> + val |= ENTER_ASPM;
> + dw_pcie_writel_dbi(pci, PORT_LOGIC_ACK_F_ASPM_CTRL, val);
> +
> + /* Program what ASPM states should get advertised */
> + if (pcie->disabled_aspm_states & 0x1)
> + disable_aspm_l0s(pcie); /* Disable L0s */
> + if (pcie->disabled_aspm_states & 0x2) {
> + disable_aspm_l10(pcie); /* Disable L1 */
> + disable_aspm_l11(pcie); /* Disable L1.1 */
> + disable_aspm_l12(pcie); /* Disable L1.2 */
> + }
> + if (pcie->disabled_aspm_states & 0x4)
> + disable_aspm_l11(pcie); /* Disable L1.1 */
> + if (pcie->disabled_aspm_states & 0x8)
> + disable_aspm_l12(pcie); /* Disable L1.2 */
> +#endif
> + val = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
> + val &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
> + dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, val);
> +
> + if (pcie->update_fc_fixup) {
> + val = dw_pcie_readl_dbi(pci, CFG_TIMER_CTRL_MAX_FUNC_NUM_OFF);
> + val |= 0x1 << CFG_TIMER_CTRL_ACK_NAK_SHIFT;
> + dw_pcie_writel_dbi(pci, CFG_TIMER_CTRL_MAX_FUNC_NUM_OFF, val);
> + }
> +
> + dw_pcie_setup_rc(pp);
> +
> + clk_set_rate(pcie->core_clk, GEN4_CORE_CLK_FREQ);
> +
> + /* Assert RST */
> + val = readl(pcie->appl_base + APPL_PINMUX);
> + val &= ~APPL_PINMUX_PEX_RST;
> + writel(val, pcie->appl_base + APPL_PINMUX);
> +
> + usleep_range(100, 200);
> +
> + /* Enable LTSSM */
> + val = readl(pcie->appl_base + APPL_CTRL);
> + val |= APPL_CTRL_LTSSM_EN;
> + writel(val, pcie->appl_base + APPL_CTRL);
> +
> + /* De-assert RST */
> + val = readl(pcie->appl_base + APPL_PINMUX);
> + val |= APPL_PINMUX_PEX_RST;
> + writel(val, pcie->appl_base + APPL_PINMUX);
> +
> + msleep(100);
This function is getting really large...
> +
> + val_w = dw_pcie_readw_dbi(pci, CFG_LINK_STATUS);
> + while (!(val_w & PCI_EXP_LNKSTA_DLLLA)) {
> + if (!count) {
> + val = readl(pcie->appl_base + APPL_DEBUG);
> + val &= APPL_DEBUG_LTSSM_STATE_MASK;
> + val >>= APPL_DEBUG_LTSSM_STATE_SHIFT;
> + tmp = readl(pcie->appl_base + APPL_LINK_STATUS);
> + tmp &= APPL_LINK_STATUS_RDLH_LINK_UP;
> + if (val == 0x11 && !tmp) {
> + dev_info(pci->dev, "Link is down in DLL");
> + dev_info(pci->dev,
> + "Trying again with DLFE disabled\n");
> + /* Disable LTSSM */
> + val = readl(pcie->appl_base + APPL_CTRL);
> + val &= ~APPL_CTRL_LTSSM_EN;
> + writel(val, pcie->appl_base + APPL_CTRL);
> +
> + reset_control_assert(pcie->core_rst);
> + reset_control_deassert(pcie->core_rst);
> +
> + offset =
> + dw_pcie_find_ext_capability(pci,
> + PCI_EXT_CAP_ID_DLF)
> + + PCI_DLF_CAP;
And now the indentation level forces you to do awkward things like this.
Perhaps split this into smaller functions to help make the function
shorter and reduce the level of indentation needed.
> + val = dw_pcie_readl_dbi(pci, offset);
> + val &= ~DL_FEATURE_EXCHANGE_EN;
> + dw_pcie_writel_dbi(pci, offset, val);
> +
> + /* Retry now with DLF Exchange disabled */
> + goto core_init;
> + }
> + dev_info(pci->dev, "Link is down\n");
> + return 0;
> + }
> + dev_dbg(pci->dev, "Polling for link up\n");
> + usleep_range(1000, 2000);
> + val_w = dw_pcie_readw_dbi(pci, CFG_LINK_STATUS);
> + count--;
> + }
> + dev_info(pci->dev, "Link is up\n");
Do we really need to be noisy about this? This is expected behaviour,
right? I find it best to only let the user know about unexpected things.
There are other ways to determine if the PCI link is up or not (if it is
you'd typically see enumeration start on the bus).
> +
> + speed = (dw_pcie_readw_dbi(pci, CFG_LINK_STATUS) & PCI_EXP_LNKSTA_CLS);
> + clk_set_rate(pcie->core_clk, pcie_gen_freq[speed - 1]);
> +
> + tegra_pcie_enable_interrupts(pp);
> +
> + return 0;
> +}
> +
> +static int tegra_pcie_dw_link_up(struct dw_pcie *pci)
> +{
> + u32 val = dw_pcie_readw_dbi(pci, CFG_LINK_STATUS);
> +
> + return !!(val & PCI_EXP_LNKSTA_DLLLA);
> +}
> +
> +static void tegra_pcie_set_msi_vec_num(struct pcie_port *pp)
> +{
> + pp->num_vectors = MAX_MSI_IRQS;
> +}
> +
> +static const struct dw_pcie_ops tegra_dw_pcie_ops = {
> + .link_up = tegra_pcie_dw_link_up,
> +};
> +
> +static struct dw_pcie_host_ops tegra_pcie_dw_host_ops = {
> + .rd_own_conf = tegra_pcie_dw_rd_own_conf,
> + .wr_own_conf = tegra_pcie_dw_wr_own_conf,
> + .host_init = tegra_pcie_dw_host_init,
> + .set_num_vectors = tegra_pcie_set_msi_vec_num,
> +};
> +
> +static void tegra_pcie_disable_phy(struct tegra_pcie_dw *pcie)
> +{
> + int phy_count = pcie->phy_count;
unsigned int?
> +
> + while (phy_count--) {
> + phy_power_off(pcie->phy[phy_count]);
> + phy_exit(pcie->phy[phy_count]);
> + }
> +}
> +
> +static int tegra_pcie_enable_phy(struct tegra_pcie_dw *pcie)
> +{
> + int phy_count = pcie->phy_count;
unsigned int?
> + int ret;
> + int i;
unsigned int?
> +
> + for (i = 0; i < phy_count; i++) {
> + ret = phy_init(pcie->phy[i]);
> + if (ret < 0)
> + goto err_phy_init;
> +
> + ret = phy_power_on(pcie->phy[i]);
> + if (ret < 0) {
> + phy_exit(pcie->phy[i]);
> + goto err_phy_power_on;
> + }
> + }
> +
> + return 0;
> +
> + while (i >= 0) {
> + phy_power_off(pcie->phy[i]);
> +err_phy_power_on:
> + phy_exit(pcie->phy[i]);
> +err_phy_init:
> + i--;
> + }
> +
> + return ret;
> +}
> +
> +static int tegra_pcie_dw_parse_dt(struct tegra_pcie_dw *pcie)
> +{
> + struct device_node *np = pcie->dev->of_node;
> + int ret;
> +
> + ret = of_property_read_u32(np, "nvidia,aspm-cmrt-us", &pcie->aspm_cmrt);
> + if (ret < 0) {
> + dev_info(pcie->dev, "Failed to read ASPM T_cmrt: %d\n", ret);
> + return ret;
> + }
> +
> + ret = of_property_read_u32(np, "nvidia,aspm-pwr-on-t-us",
> + &pcie->aspm_pwr_on_t);
> + if (ret < 0)
> + dev_info(pcie->dev, "Failed to read ASPM Power On time: %d\n",
> + ret);
> +
> + ret = of_property_read_u32(np, "nvidia,aspm-l0s-entrance-latency-us",
> + &pcie->aspm_l0s_enter_lat);
> + if (ret < 0)
> + dev_info(pcie->dev,
> + "Failed to read ASPM L0s Entrance latency: %d\n", ret);
> +
> + ret = of_property_read_u32(np, "nvidia,disable-aspm-states",
> + &pcie->disabled_aspm_states);
> + if (ret < 0) {
> + dev_info(pcie->dev,
> + "Disabling advertisement of all ASPM states\n");
> + pcie->disabled_aspm_states = 0xF;
> + }
> +
> + ret = of_property_read_u32(np, "num-lanes", &pcie->num_lanes);
> + if (ret < 0) {
> + dev_err(pcie->dev, "Failed to read num-lanes: %d\n", ret);
> + return ret;
> + }
> +
> + pcie->max_speed = of_pci_get_max_link_speed(np);
> +
> + ret = of_property_read_u32(np, "nvidia,init-link-speed",
> + &pcie->init_speed);
> + if (ret < 0 || (pcie->init_speed < 1 || pcie->init_speed > 4)) {
> + dev_dbg(pcie->dev, "Setting init speed to max speed\n");
> + pcie->init_speed = PCI_EXP_LNKCAP_SLS_16_0GB;
> + }
> +
> + ret = of_property_read_u32(np, "nvidia,controller-id", &pcie->cid);
> + if (ret) {
> + dev_err(pcie->dev, "Controller-ID is missing in DT: %d\n", ret);
> + return ret;
> + }
> +
> + pcie->phy_count = of_property_count_strings(np, "phy-names");
> + if (pcie->phy_count < 0) {
> + dev_err(pcie->dev, "Unable to find phy entries\n");
> + return pcie->phy_count;
> + }
> +
> + if (of_property_read_bool(np, "nvidia,update-fc-fixup"))
> + pcie->update_fc_fixup = true;
> +
> + pcie->pex_wake = of_get_named_gpio(np, "nvidia,wake-gpios", 0);
> +
> + pcie->supports_clkreq =
> + of_property_read_bool(pcie->dev->of_node, "supports-clkreq");
> +
> + return 0;
> +}
> +
> +static int tegra_pcie_bpmp_set_ctrl_state(struct tegra_pcie_dw *pcie,
> + int enable)
> +{
> + struct mrq_uphy_response resp;
> + struct tegra_bpmp_message msg;
> + struct mrq_uphy_request req;
> + struct tegra_bpmp *bpmp;
> + int err;
> +
> + memset(&req, 0, sizeof(req));
> + memset(&resp, 0, sizeof(resp));
> +
> + req.cmd = CMD_UPHY_PCIE_CONTROLLER_STATE;
> + req.controller_state.pcie_controller = pcie->cid;
> + req.controller_state.enable = enable;
> +
> + memset(&msg, 0, sizeof(msg));
> + msg.mrq = MRQ_UPHY;
> + msg.tx.data = &req;
> + msg.tx.size = sizeof(req);
> + msg.rx.data = &resp;
> + msg.rx.size = sizeof(resp);
> +
> + bpmp = tegra_bpmp_get(pcie->dev);
> + if (IS_ERR(bpmp))
> + return PTR_ERR(bpmp);
You should get a reference to the BPMP at ->probe() time. The reason is
that this can return -EPROBE_DEFER if the BPMP has not been probed yet,
and ->probe() is the only time where that error code can be handled in
the right way.
> +
> + if (irqs_disabled())
> + err = tegra_bpmp_transfer_atomic(bpmp, &msg);
> + else
> + err = tegra_bpmp_transfer(bpmp, &msg);
> +
> + tegra_bpmp_put(bpmp);
> +
> + return err;
> +}
> +
> +static void tegra_pcie_downstream_dev_to_D0(struct tegra_pcie_dw *pcie)
> +{
> + struct pcie_port *pp = &pcie->pci.pp;
> + struct pci_dev *pdev;
> + struct pci_bus *child;
> +
> + list_for_each_entry(child, &pp->root_bus->children, node) {
> + /* Bring downstream devices to D0 if they are not already in */
> + if (child->parent == pp->root_bus)
> + break;
> + }
> + list_for_each_entry(pdev, &child->devices, bus_list) {
> + if (PCI_FUNC(pdev->devfn) == 0) {
> + if (pci_set_power_state(pdev, PCI_D0))
> + dev_err(pcie->dev, "Transition to D0 failed\n");
> + }
> + }
> +}
> +
> +static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,
> + bool en_hw_hot_rst)
> +{
> + int ret;
> + u32 val;
> +
> + if (pcie->cid != CTRL_5) {
> + ret = tegra_pcie_bpmp_set_ctrl_state(pcie, true);
> + if (ret) {
> + dev_err(pcie->dev, "Enabling controller-%d failed:%d\n",
> + pcie->cid, ret);
> + return ret;
> + }
> + }
> +
> + ret = regulator_enable(pcie->pex_ctl_reg);
> + if (ret < 0) {
> + dev_err(pcie->dev, "Regulator enable failed: %d\n", ret);
> + goto fail_reg_en;
> + }
> +
> + ret = clk_prepare_enable(pcie->core_clk);
> + if (ret) {
> + dev_err(pcie->dev, "Failed to enable core clock\n");
> + goto fail_core_clk;
> + }
> +
> + reset_control_deassert(pcie->core_apb_rst);
> +
> + if (en_hw_hot_rst) {
> + /* Enable HW_HOT_RST mode */
> + val = readl(pcie->appl_base + APPL_CTRL);
> + val &= ~(APPL_CTRL_HW_HOT_RST_MODE_MASK <<
> + APPL_CTRL_HW_HOT_RST_MODE_SHIFT);
> + val |= APPL_CTRL_HW_HOT_RST_EN;
> + writel(val, pcie->appl_base + APPL_CTRL);
> + }
> +
> + ret = tegra_pcie_enable_phy(pcie);
> + if (ret) {
> + dev_err(pcie->dev, "Failed to enable phy\n");
> + goto fail_phy;
> + }
> +
> + /* Update CFG base address */
> + writel(pcie->dbi_res->start & APPL_CFG_BASE_ADDR_MASK,
> + pcie->appl_base + APPL_CFG_BASE_ADDR);
> +
> + /* Configure this core for RP mode operation */
> + writel(APPL_DM_TYPE_RP, pcie->appl_base + APPL_DM_TYPE);
> +
> + writel(0x0, pcie->appl_base + APPL_CFG_SLCG_OVERRIDE);
> +
> + val = readl(pcie->appl_base + APPL_CTRL);
> + writel(val | APPL_CTRL_SYS_PRE_DET_STATE, pcie->appl_base + APPL_CTRL);
> +
> + val = readl(pcie->appl_base + APPL_CFG_MISC);
> + val |= (APPL_CFG_MISC_ARCACHE_VAL << APPL_CFG_MISC_ARCACHE_SHIFT);
> + writel(val, pcie->appl_base + APPL_CFG_MISC);
> +
> + if (!pcie->supports_clkreq) {
> + val = readl(pcie->appl_base + APPL_PINMUX);
> + val |= APPL_PINMUX_CLKREQ_OUT_OVRD_EN;
> + val |= APPL_PINMUX_CLKREQ_OUT_OVRD;
> + writel(val, pcie->appl_base + APPL_PINMUX);
> +
> + /* Disable ASPM-L1SS adv as there is no CLKREQ routing */
> + disable_aspm_l11(pcie); /* Disable L1.1 */
> + disable_aspm_l12(pcie); /* Disable L1.2 */
> + }
> +
> + /* Update iATU_DMA base address */
> + writel(pcie->atu_dma_res->start & APPL_CFG_IATU_DMA_BASE_ADDR_MASK,
> + pcie->appl_base + APPL_CFG_IATU_DMA_BASE_ADDR);
> +
> + reset_control_deassert(pcie->core_rst);
> +
> + return ret;
> +
> +fail_phy:
> + reset_control_assert(pcie->core_apb_rst);
> + clk_disable_unprepare(pcie->core_clk);
> +fail_core_clk:
> + regulator_disable(pcie->pex_ctl_reg);
> +fail_reg_en:
> + if (pcie->cid != CTRL_5)
> + tegra_pcie_bpmp_set_ctrl_state(pcie, false);
> +
> + return ret;
> +}
> +
> +static int tegra_pcie_init_controller(struct tegra_pcie_dw *pcie)
> +{
> + struct dw_pcie *pci = &pcie->pci;
> + struct pcie_port *pp = &pci->pp;
> + int ret = 0;
> +
> + ret = tegra_pcie_config_controller(pcie, false);
> + if (ret < 0)
> + return ret;
> +
> + /* Program to use MPS of 256 wherever possible */
> + pcie_bus_config = PCIE_BUS_SAFE;
> +
> + pp->root_bus_nr = -1;
> + pp->ops = &tegra_pcie_dw_host_ops;
> +
> + /*
> + * Tegra doesn't support raising PME interrupts through MSI interrupt
> + * line. So, raising PME interrupts through MSI should be disabled
> + */
> + pcie_pme_disable_msi();
> +
> + ret = dw_pcie_host_init(pp);
> + if (ret < 0) {
> + dev_err(pcie->dev, "Add PCIe port failed: %d\n", ret);
> + goto fail_host_init;
> + }
> +
> + return 0;
> +
> +fail_host_init:
> + reset_control_assert(pcie->core_rst);
> + tegra_pcie_disable_phy(pcie);
> + reset_control_assert(pcie->core_apb_rst);
> + clk_disable_unprepare(pcie->core_clk);
> + regulator_disable(pcie->pex_ctl_reg);
> + if (pcie->cid != CTRL_5)
> + tegra_pcie_bpmp_set_ctrl_state(pcie, false);
> +
> + return ret;
> +}
> +
> +static int tegra_pcie_try_link_l2(struct tegra_pcie_dw *pcie)
> +{
> + u32 val;
> +
> + if (!tegra_pcie_dw_link_up(&pcie->pci))
> + return 0;
> +
> + val = readl(pcie->appl_base + APPL_RADM_STATUS);
> + val |= APPL_PM_XMT_TURNOFF_STATE;
> + writel(val, pcie->appl_base + APPL_RADM_STATUS);
> +
> + return readl_poll_timeout_atomic(pcie->appl_base + APPL_DEBUG, val,
> + val & APPL_DEBUG_PM_LINKST_IN_L2_LAT,
> + 1, PME_ACK_TIMEOUT);
> +}
> +
> +static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)
> +{
> + u32 data;
> + int err;
> +
> + if (!tegra_pcie_dw_link_up(&pcie->pci)) {
> + dev_dbg(pcie->dev, "PCIe link is not up...!\n");
> + return;
> + }
> +
> + if (tegra_pcie_try_link_l2(pcie)) {
> + dev_info(pcie->dev, "Link didn't transition to L2 state\n");
> + /*
> + * TX lane clock freq will reset to Gen1 only if link is in L2
> + * or detect state.
> + * So apply pex_rst to end point to force RP to go into detect
> + * state
> + */
> + data = readl(pcie->appl_base + APPL_PINMUX);
> + data &= ~APPL_PINMUX_PEX_RST;
> + writel(data, pcie->appl_base + APPL_PINMUX);
> +
> + err = readl_poll_timeout_atomic(pcie->appl_base + APPL_DEBUG,
> + data,
> + ((data &
> + APPL_DEBUG_LTSSM_STATE_MASK) >>
> + APPL_DEBUG_LTSSM_STATE_SHIFT) ==
> + LTSSM_STATE_PRE_DETECT,
> + 1, LTSSM_TIMEOUT);
> + if (err) {
> + dev_info(pcie->dev, "Link didn't go to detect state\n");
> + } else {
> + /* Disable LTSSM after link is in detect state */
> + data = readl(pcie->appl_base + APPL_CTRL);
> + data &= ~APPL_CTRL_LTSSM_EN;
> + writel(data, pcie->appl_base + APPL_CTRL);
> + }
> + }
> + /*
> + * DBI registers may not be accessible after this as PLL-E would be
> + * down depending on how CLKREQ is pulled by end point
> + */
> + data = readl(pcie->appl_base + APPL_PINMUX);
> + data |= (APPL_PINMUX_CLKREQ_OVERRIDE_EN | APPL_PINMUX_CLKREQ_OVERRIDE);
> + /* Cut REFCLK to slot */
> + data |= APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE_EN;
> + data &= ~APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE;
> + writel(data, pcie->appl_base + APPL_PINMUX);
> +}
> +
> +static int tegra_pcie_deinit_controller(struct tegra_pcie_dw *pcie)
> +{
> + /*
> + * link doesn't go into L2 state with some of the endpoints with Tegra
> + * if they are not in D0 state. So, need to make sure that immediate
> + * downstream devices are in D0 state before sending PME_TurnOff to put
> + * link into L2 state
> + */
> + tegra_pcie_downstream_dev_to_D0(pcie);
I think this was briefly discussed at some point, but I'm still not sure
I understand why this is necessary. Suspend/resume works hierarchically,
so the PCI host controller should not get suspended unless all children
have been suspended first. So why do we need to force devices off? Does
it not indicate an error in the driver of the downstream devices if they
are not suspended yet at this point?
> + dw_pcie_host_deinit(&pcie->pci.pp);
> + tegra_pcie_dw_pme_turnoff(pcie);
> + reset_control_assert(pcie->core_rst);
> + tegra_pcie_disable_phy(pcie);
> + reset_control_assert(pcie->core_apb_rst);
> + clk_disable_unprepare(pcie->core_clk);
> + regulator_disable(pcie->pex_ctl_reg);
> +
> + if (pcie->cid != CTRL_5)
> + tegra_pcie_bpmp_set_ctrl_state(pcie, false);
> +
> + return 0;
> +}
This sequence seems to be repeated a lot. Could this be moved to
something like runtime PM to share that code?
> +
> +static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie)
> +{
> + struct pcie_port *pp = &pcie->pci.pp;
> + char *name;
> + int ret;
> +
> + if (IS_ENABLED(CONFIG_PCI_MSI)) {
> + pp->msi_irq = of_irq_get_byname(pcie->dev->of_node, "msi");
> + if (!pp->msi_irq) {
> + dev_err(pcie->dev, "Failed to get MSI interrupt\n");
> + return -ENODEV;
> + }
> + }
> +
> + pm_runtime_enable(pcie->dev);
> + ret = pm_runtime_get_sync(pcie->dev);
> + if (ret < 0) {
> + dev_err(pcie->dev, "Failed to get runtime sync for PCIe dev\n");
> + pm_runtime_disable(pcie->dev);
> + return ret;
> + }
> +
> + tegra_pcie_init_controller(pcie);
> +
> + pcie->link_state = tegra_pcie_dw_link_up(&pcie->pci);
> +
> + if (!pcie->link_state) {
> + ret = -ENOMEDIUM;
> + goto fail_host_init;
> + }
Shouldn't the debugfs hierarchy be created whether or not the link is
up? Perhaps something in debugfs may one day contain useful information
about why the link couldn't be brought up.
> +
> + name = kasprintf(GFP_KERNEL, "pcie@%x",
> + (uint32_t)pcie->appl_res->start);
Is this not the same as "%pOFn" on the device's device tree node? Having
some sort of common identifier makes it easier to find the directory.
> + if (!name) {
> + ret = -ENOMEM;
> + goto fail_host_init;
> + }
> +
> + pcie->debugfs = debugfs_create_dir(name, NULL);
> + if (!pcie->debugfs)
> + dev_err(pcie->dev, "Debugfs creation failed\n");
> + else
> + init_debugfs(pcie);
> + kfree(name);
> +
> + return ret;
> +
> +fail_host_init:
> + tegra_pcie_deinit_controller(pcie);
> + pm_runtime_put_sync(pcie->dev);
> + pm_runtime_disable(pcie->dev);
> + return ret;
> +}
> +
> +static int tegra_pcie_config_pex_wake(struct tegra_pcie_dw *pcie)
> +{
> + int ret;
> +
> + ret = devm_gpio_request(pcie->dev, pcie->pex_wake, "pcie_wake");
This should really use GPIO descriptors.
> + if (ret < 0) {
> + if (ret == -EBUSY) {
> + dev_err(pcie->dev, "pex_wake already in use\n");
> + pcie->pex_wake = -EINVAL;
> + } else {
> + dev_err(pcie->dev, "pcie_wake gpio_request failed %d\n",
> + ret);
> + return ret;
I'm not sure it makes sense to have different error messages for these
cases. Something like this would do:
dev_err(pcie->dev, "failed to request wake GPIO: %d\n", ret);
The error code indicates what went wrong.
> + }
> + }
> +
> + if (pcie->pex_wake != -EINVAL) {
> + ret = gpio_direction_input(pcie->pex_wake);
> + if (ret < 0) {
> + dev_err(pcie->dev,
> + "Setting pcie_wake input direction failed %d\n",
> + ret);
> + return ret;
> + }
I think you can do this as part of the devm_gpiod_request() call.
> + device_init_wakeup(pcie->dev, true);
> + }
> +
> + return ret;
> +}
> +
> +static const struct tegra_pcie_of_data tegra_pcie_rc_of_data = {
> + .mode = DW_PCIE_RC_TYPE,
> +};
> +
> +static const struct of_device_id tegra_pcie_dw_of_match[] = {
> + {
> + .compatible = "nvidia,tegra194-pcie",
> + .data = &tegra_pcie_rc_of_data,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, tegra_pcie_dw_of_match);
> +
> +static int tegra_pcie_dw_probe(struct platform_device *pdev)
> +{
> + const struct tegra_pcie_of_data *data;
> + struct device *dev = &pdev->dev;
> + struct resource *atu_dma_res;
There seems to be a tab instead of a space after "resource".
> + struct tegra_pcie_dw *pcie;
> + struct resource *dbi_res;
Same here.
> + struct pcie_port *pp;
> + struct dw_pcie *pci;
> + struct phy **phy;
Perhaps "phys" since this is an array of multiple PHYs.
> + char *name;
> + int ret, i;
unsigned int for i?
> +
> + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> + if (!pcie)
> + return -ENOMEM;
> +
> + pci = &pcie->pci;
> + pci->dev = &pdev->dev;
> + pci->ops = &tegra_dw_pcie_ops;
> + pp = &pci->pp;
> + pcie->dev = &pdev->dev;
> +
> + data = (struct tegra_pcie_of_data *)of_device_get_match_data(dev);
> + if (!data)
> + return -EINVAL;
> + pcie->mode = (enum dw_pcie_device_mode)data->mode;
> +
> + ret = tegra_pcie_dw_parse_dt(pcie);
> + if (ret < 0) {
> + dev_err(pcie->dev, "Device tree parsing failed: %d\n", ret);
> + return ret;
> + }
> +
> + if (gpio_is_valid(pcie->pex_wake))
> + tegra_pcie_config_pex_wake(pcie);
> +
> + pcie->pex_ctl_reg = devm_regulator_get(dev, "vddio-pex-ctl");
> + if (IS_ERR(pcie->pex_ctl_reg)) {
> + dev_err(dev, "Failed to get regulator: %ld\n",
> + PTR_ERR(pcie->pex_ctl_reg));
> + return PTR_ERR(pcie->pex_ctl_reg);
> + }
> +
> + pcie->core_clk = devm_clk_get(dev, "core");
> + if (IS_ERR(pcie->core_clk)) {
> + dev_err(dev, "Failed to get core clock\n");
> + return PTR_ERR(pcie->core_clk);
> + }
> +
> + pcie->appl_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "appl");
> + if (!pcie->appl_res) {
> + dev_err(dev, "Missing appl space\n");
> + return PTR_ERR(pcie->appl_res);
> + }
> + pcie->appl_base = devm_ioremap_resource(dev, pcie->appl_res);
> + if (IS_ERR(pcie->appl_base)) {
> + dev_err(dev, "Mapping appl space failed\n");
> + return PTR_ERR(pcie->appl_base);
> + }
> +
> + pcie->core_apb_rst = devm_reset_control_get(pcie->dev, "core_apb");
> + if (IS_ERR(pcie->core_apb_rst)) {
> + dev_err(pcie->dev, "core_apb reset is missing\n");
> + return PTR_ERR(pcie->core_apb_rst);
> + }
> +
> + phy = devm_kcalloc(pcie->dev, pcie->phy_count, sizeof(*phy),
> + GFP_KERNEL);
> + if (!phy)
> + return PTR_ERR(phy);
> +
> + for (i = 0; i < pcie->phy_count; i++) {
> + name = kasprintf(GFP_KERNEL, "p2u-%u", i);
> + if (!name) {
> + dev_err(pcie->dev, "Failed to create P2U string\n");
> + return -ENOMEM;
> + }
> + phy[i] = devm_phy_get(pcie->dev, name);
> + kfree(name);
> + if (IS_ERR(phy[i])) {
> + ret = PTR_ERR(phy[i]);
> + dev_err(pcie->dev, "phy_get error: %d\n", ret);
There's a flurry error message variants in the driver. It'd be nice to
see some consistency. You've used "failed to ...: %d\n" in some cases
and I think that's a pretty standard format for error messages.
> + return ret;
> + }
> + }
> +
> + pcie->phy = phy;
> +
> + dbi_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
> + if (!dbi_res) {
> + dev_err(dev, "Missing config space\n");
> + return PTR_ERR(dbi_res);
> + }
> + pcie->dbi_res = dbi_res;
> +
> + pci->dbi_base = devm_ioremap_resource(dev, dbi_res);
> + if (IS_ERR(pci->dbi_base)) {
> + dev_err(dev, "Mapping dbi space failed\n");
> + return PTR_ERR(pci->dbi_base);
> + }
> +
> + /* Tegra HW locates DBI2 at a fixed offset from DBI */
> + pci->dbi_base2 = pci->dbi_base + 0x1000;
> +
> + atu_dma_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "atu_dma");
> + if (!atu_dma_res) {
> + dev_err(dev, "Missing atu_dma space\n");
> + return PTR_ERR(atu_dma_res);
> + }
> + pcie->atu_dma_res = atu_dma_res;
> + pci->atu_base = devm_ioremap_resource(dev, atu_dma_res);
> + if (IS_ERR(pci->atu_base)) {
> + dev_err(dev, "Mapping atu space failed\n");
> + return PTR_ERR(pci->atu_base);
> + }
> +
> + pcie->core_rst = devm_reset_control_get(pcie->dev, "core");
> + if (IS_ERR(pcie->core_rst)) {
> + dev_err(pcie->dev, "core reset is missing\n");
It's not necessarily missing. Just output the error code as part of the
error message instead of speculating about the failure.
> + return PTR_ERR(pcie->core_rst);
> + }
> +
> + pp->irq = platform_get_irq_byname(pdev, "intr");
> + if (!pp->irq) {
> + dev_err(pcie->dev, "Failed to get intr interrupt\n");
> + return -ENODEV;
> + }
> +
> + ret = devm_request_irq(dev, pp->irq, tegra_pcie_irq_handler,
> + IRQF_SHARED, "tegra-pcie-intr", pcie);
> + if (ret) {
> + dev_err(pcie->dev, "Failed to request IRQ %d\n", pp->irq);
Perhaps output the error code?
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, pcie);
> +
> + if (pcie->mode == DW_PCIE_RC_TYPE) {
> + ret = tegra_pcie_config_rp(pcie);
> + if (ret == -ENOMEDIUM)
> + ret = 0;
> + }
> +
> + return ret;
> +}
> +
> +static int tegra_pcie_dw_remove(struct platform_device *pdev)
> +{
> + struct tegra_pcie_dw *pcie = platform_get_drvdata(pdev);
> +
> + if (pcie->mode != DW_PCIE_RC_TYPE)
> + return 0;
> +
> + if (!pcie->link_state)
> + return 0;
Why only do this if there's no link? You did a fair amount of setting up
in ->probe(), all of which needs to be undone, whether the link is up or
not.
> +
> + debugfs_remove_recursive(pcie->debugfs);
> + tegra_pcie_deinit_controller(pcie);
> + pm_runtime_put_sync(pcie->dev);
> + pm_runtime_disable(pcie->dev);
> +
> + return 0;
> +}
> +
> +static int tegra_pcie_dw_suspend_late(struct device *dev)
> +{
> + struct tegra_pcie_dw *pcie = dev_get_drvdata(dev);
> + u32 val;
> +
> + if (!pcie->link_state)
> + return 0;
> +
> + /* Enable HW_HOT_RST mode */
> + val = readl(pcie->appl_base + APPL_CTRL);
> + val &= ~(APPL_CTRL_HW_HOT_RST_MODE_MASK <<
> + APPL_CTRL_HW_HOT_RST_MODE_SHIFT);
> + val |= APPL_CTRL_HW_HOT_RST_EN;
> + writel(val, pcie->appl_base + APPL_CTRL);
> +
> + return 0;
> +}
> +
> +static int tegra_pcie_dw_suspend_noirq(struct device *dev)
> +{
> + struct tegra_pcie_dw *pcie = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + if (!pcie->link_state)
> + return 0;
> +
> + /* Save MSI interrupt vector */
> + pcie->msi_ctrl_int = dw_pcie_readl_dbi(&pcie->pci,
> + PORT_LOGIC_MSI_CTRL_INT_0_EN);
> + tegra_pcie_downstream_dev_to_D0(pcie);
> + tegra_pcie_dw_pme_turnoff(pcie);
> + reset_control_assert(pcie->core_rst);
> + tegra_pcie_disable_phy(pcie);
> + reset_control_assert(pcie->core_apb_rst);
> + clk_disable_unprepare(pcie->core_clk);
> + regulator_disable(pcie->pex_ctl_reg);
> + if (pcie->cid != CTRL_5) {
> + ret = tegra_pcie_bpmp_set_ctrl_state(pcie, false);
> + if (ret) {
> + dev_err(pcie->dev, "Disabling ctrl-%d failed:%d\n",
> + pcie->cid, ret);
> + return ret;
> + }
> + }
> + if (gpio_is_valid(pcie->pex_wake) && device_may_wakeup(dev)) {
> + ret = enable_irq_wake(gpio_to_irq(pcie->pex_wake));
You never seem to be using the wake GPIO as a GPIO, so why not just
describe it as an interrupt?
> + if (ret < 0)
> + dev_err(dev, "Enable wake IRQ failed: %d\n", ret);
> + }
> +
> + return ret;
> +}
> +
> +static int tegra_pcie_dw_resume_noirq(struct device *dev)
> +{
> + struct tegra_pcie_dw *pcie = dev_get_drvdata(dev);
> + int ret;
> +
> + if (!pcie->link_state)
> + return 0;
> +
> + if (gpio_is_valid(pcie->pex_wake) && device_may_wakeup(dev)) {
> + ret = disable_irq_wake(gpio_to_irq(pcie->pex_wake));
> + if (ret < 0)
> + dev_err(dev, "Disable wake IRQ failed: %d\n", ret);
> + }
> +
> + ret = tegra_pcie_config_controller(pcie, true);
> + if (ret < 0)
> + return ret;
> +
> + ret = tegra_pcie_dw_host_init(&pcie->pci.pp);
> + if (ret < 0) {
> + dev_err(dev, "Failed to init host: %d\n", ret);
> + goto fail_host_init;
> + }
> +
> + /* Restore MSI interrupt vector */
> + dw_pcie_writel_dbi(&pcie->pci, PORT_LOGIC_MSI_CTRL_INT_0_EN,
> + pcie->msi_ctrl_int);
> +
> + return 0;
> +fail_host_init:
> + reset_control_assert(pcie->core_rst);
> + tegra_pcie_disable_phy(pcie);
> + reset_control_assert(pcie->core_apb_rst);
> + clk_disable_unprepare(pcie->core_clk);
> + regulator_disable(pcie->pex_ctl_reg);
> + if (pcie->cid != CTRL_5)
> + tegra_pcie_bpmp_set_ctrl_state(pcie, false);
It might be worth moving the controller ID check into the set control
state function to avoid having to repeat it in all of these callsites.
> +
> + return ret;
> +}
> +
> +static int tegra_pcie_dw_resume_early(struct device *dev)
> +{
> + struct tegra_pcie_dw *pcie = dev_get_drvdata(dev);
> + u32 val;
> +
> + if (!pcie->link_state)
> + return 0;
> +
> + /* Disable HW_HOT_RST mode */
> + val = readl(pcie->appl_base + APPL_CTRL);
> + val &= ~(APPL_CTRL_HW_HOT_RST_MODE_MASK <<
> + APPL_CTRL_HW_HOT_RST_MODE_SHIFT);
> + val |= APPL_CTRL_HW_HOT_RST_MODE_IMDT_RST <<
> + APPL_CTRL_HW_HOT_RST_MODE_SHIFT;
> + val &= ~APPL_CTRL_HW_HOT_RST_EN;
> + writel(val, pcie->appl_base + APPL_CTRL);
> +
> + return 0;
> +}
> +
> +static void tegra_pcie_dw_shutdown(struct platform_device *pdev)
> +{
> + struct tegra_pcie_dw *pcie = platform_get_drvdata(pdev);
> +
> + if (pcie->mode != DW_PCIE_RC_TYPE)
> + return;
> +
> + if (!pcie->link_state)
> + return;
> +
> + debugfs_remove_recursive(pcie->debugfs);
> + tegra_pcie_downstream_dev_to_D0(pcie);
> +
> + disable_irq(pcie->pci.pp.irq);
> + if (IS_ENABLED(CONFIG_PCI_MSI))
> + disable_irq(pcie->pci.pp.msi_irq);
> +
> + tegra_pcie_dw_pme_turnoff(pcie);
> +
> + reset_control_assert(pcie->core_rst);
> + tegra_pcie_disable_phy(pcie);
> + reset_control_assert(pcie->core_apb_rst);
> + clk_disable_unprepare(pcie->core_clk);
> + regulator_disable(pcie->pex_ctl_reg);
> + if (pcie->cid != CTRL_5)
> + tegra_pcie_bpmp_set_ctrl_state(pcie, false);
> +}
> +
> +static const struct dev_pm_ops tegra_pcie_dw_pm_ops = {
> + .suspend_late = tegra_pcie_dw_suspend_late,
> + .suspend_noirq = tegra_pcie_dw_suspend_noirq,
> + .resume_noirq = tegra_pcie_dw_resume_noirq,
> + .resume_early = tegra_pcie_dw_resume_early,
> +};
> +
> +static struct platform_driver tegra_pcie_dw_driver = {
> + .probe = tegra_pcie_dw_probe,
> + .remove = tegra_pcie_dw_remove,
> + .shutdown = tegra_pcie_dw_shutdown,
> + .driver = {
> + .name = "pcie-tegra",
We usually name drivers "tegra-*" on Tegra. The Tegra PCI controller
already uses that name, so perhaps in this case use something like
tegra194-pcie.
Thierry
> +#ifdef CONFIG_PM
> + .pm = &tegra_pcie_dw_pm_ops,
> +#endif
> + .of_match_table = tegra_pcie_dw_of_match,
> + },
> +};
> +module_platform_driver(tegra_pcie_dw_driver);
> +
> +MODULE_AUTHOR("Vidya Sagar <vidyas@...dia.com>");
> +MODULE_DESCRIPTION("NVIDIA PCIe host controller driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.17.1
>
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists