lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri,  3 May 2019 19:35:34 +0530
From:   Srinath Mannam <srinath.mannam@...adcom.com>
To:     Bjorn Helgaas <bhelgaas@...gle.com>,
        Robin Murphy <robin.murphy@....com>,
        Joerg Roedel <joro@...tes.org>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Eric Auger <eric.auger@...hat.com>, poza@...eaurora.org,
        Ray Jui <rjui@...adcom.com>
Cc:     bcm-kernel-feedback-list@...adcom.com, linux-pci@...r.kernel.org,
        iommu@...ts.linux-foundation.org, linux-kernel@...r.kernel.org,
        Srinath Mannam <srinath.mannam@...adcom.com>
Subject: [PATCH v6 3/3] PCI: iproc: Add sorted dma ranges resource entries to host bridge

The IPROC host controller allows only a subset of physical address space
as target of inbound PCI memory transactions addresses.

PCIe devices memory transactions targeting memory regions that
are not allowed for inbound transactions in the host controller
are rejected by the host controller and cannot reach the upstream
buses.

Firmware device tree description defines the DMA ranges that are
addressable by devices DMA transactions; parse the device tree
dma-ranges property and add its ranges to the PCI host bridge dma_ranges
list; the iova_reserve_pci_windows() call in the driver will reserve the
IOVA address ranges that are not addressable (ie memory holes in the
dma-ranges set) so that they are not allocated to PCI devices for DMA
transfers.

All allowed address ranges are listed in dma-ranges DT parameter.

Example:

dma-ranges = < \
  0x43000000 0x00 0x80000000 0x00 0x80000000 0x00 0x80000000 \
  0x43000000 0x08 0x00000000 0x08 0x00000000 0x08 0x00000000 \
  0x43000000 0x80 0x00000000 0x80 0x00000000 0x40 0x00000000>

In the above example of dma-ranges, memory address from

0x0 - 0x80000000,
0x100000000 - 0x800000000,
0x1000000000 - 0x8000000000 and
0x10000000000 - 0xffffffffffffffff.

are not allowed to be used as inbound addresses.

Based-on-patch-by: Oza Pawandeep <oza.oza@...adcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@...adcom.com>
[lorenzo.pieralisi@....com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
Reviewed-by: Oza Pawandeep <poza@...eaurora.org>
Reviewed-by: Eric Auger <eric.auger@...hat.com>
---
 drivers/pci/controller/pcie-iproc.c | 44 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index c20fd6b..94ba5c0 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -1146,11 +1146,43 @@ static int iproc_pcie_setup_ib(struct iproc_pcie *pcie,
 	return ret;
 }
 
+static int
+iproc_pcie_add_dma_range(struct device *dev, struct list_head *resources,
+			 struct of_pci_range *range)
+{
+	struct resource *res;
+	struct resource_entry *entry, *tmp;
+	struct list_head *head = resources;
+
+	res = devm_kzalloc(dev, sizeof(struct resource), GFP_KERNEL);
+	if (!res)
+		return -ENOMEM;
+
+	resource_list_for_each_entry(tmp, resources) {
+		if (tmp->res->start < range->cpu_addr)
+			head = &tmp->node;
+	}
+
+	res->start = range->cpu_addr;
+	res->end = res->start + range->size - 1;
+
+	entry = resource_list_create_entry(res, 0);
+	if (!entry)
+		return -ENOMEM;
+
+	entry->offset = res->start - range->cpu_addr;
+	resource_list_add(entry, head);
+
+	return 0;
+}
+
 static int iproc_pcie_map_dma_ranges(struct iproc_pcie *pcie)
 {
+	struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
 	struct of_pci_range range;
 	struct of_pci_range_parser parser;
 	int ret;
+	LIST_HEAD(resources);
 
 	/* Get the dma-ranges from DT */
 	ret = of_pci_dma_range_parser_init(&parser, pcie->dev->of_node);
@@ -1158,13 +1190,23 @@ static int iproc_pcie_map_dma_ranges(struct iproc_pcie *pcie)
 		return ret;
 
 	for_each_of_pci_range(&parser, &range) {
+		ret = iproc_pcie_add_dma_range(pcie->dev,
+					       &resources,
+					       &range);
+		if (ret)
+			goto out;
 		/* Each range entry corresponds to an inbound mapping region */
 		ret = iproc_pcie_setup_ib(pcie, &range, IPROC_PCIE_IB_MAP_MEM);
 		if (ret)
-			return ret;
+			goto out;
 	}
 
+	list_splice_init(&resources, &host->dma_ranges);
+
 	return 0;
+out:
+	pci_free_resource_list(&resources);
+	return ret;
 }
 
 static int iproce_pcie_get_msi(struct iproc_pcie *pcie,
-- 
2.7.4

Powered by blists - more mailing lists