| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190504102453.401059961@linuxfoundation.org>
Date: Sat, 4 May 2019 12:25:15 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Christo Gouws <gouws.christo@...il.com>,
Alan Stern <stern@...land.harvard.edu>,
Takashi Iwai <tiwai@...e.de>
Subject: [PATCH 5.0 30/32] ALSA: line6: use dynamic buffers
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
commit e5c812e84f0dece3400d5caf42522287e6ef139f upstream.
The line6 driver uses a lot of USB buffers off of the stack, which is
not allowed on many systems, causing the driver to crash on some of
them. Fix this up by dynamically allocating the buffers with kmalloc()
which allows for proper DMA-able memory.
Reported-by: Christo Gouws <gouws.christo@...il.com>
Reported-by: Alan Stern <stern@...land.harvard.edu>
Tested-by: Christo Gouws <gouws.christo@...il.com>
Cc: stable <stable@...r.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@...e.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
sound/usb/line6/driver.c | 60 ++++++++++++++++++++++++++-------------------
sound/usb/line6/podhd.c | 21 +++++++++------
sound/usb/line6/toneport.c | 24 +++++++++++++-----
3 files changed, 65 insertions(+), 40 deletions(-)
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -351,12 +351,16 @@ int line6_read_data(struct usb_line6 *li
{
struct usb_device *usbdev = line6->usbdev;
int ret;
- unsigned char len;
+ unsigned char *len;
unsigned count;
if (address > 0xffff || datalen > 0xff)
return -EINVAL;
+ len = kmalloc(sizeof(*len), GFP_KERNEL);
+ if (!len)
+ return -ENOMEM;
+
/* query the serial number: */
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
@@ -365,7 +369,7 @@ int line6_read_data(struct usb_line6 *li
if (ret < 0) {
dev_err(line6->ifcdev, "read request failed (error %d)\n", ret);
- return ret;
+ goto exit;
}
/* Wait for data length. We'll get 0xff until length arrives. */
@@ -375,28 +379,29 @@ int line6_read_data(struct usb_line6 *li
ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE |
USB_DIR_IN,
- 0x0012, 0x0000, &len, 1,
+ 0x0012, 0x0000, len, 1,
LINE6_TIMEOUT * HZ);
if (ret < 0) {
dev_err(line6->ifcdev,
"receive length failed (error %d)\n", ret);
- return ret;
+ goto exit;
}
- if (len != 0xff)
+ if (*len != 0xff)
break;
}
- if (len == 0xff) {
+ ret = -EIO;
+ if (*len == 0xff) {
dev_err(line6->ifcdev, "read failed after %d retries\n",
count);
- return -EIO;
- } else if (len != datalen) {
+ goto exit;
+ } else if (*len != datalen) {
/* should be equal or something went wrong */
dev_err(line6->ifcdev,
"length mismatch (expected %d, got %d)\n",
- (int)datalen, (int)len);
- return -EIO;
+ (int)datalen, (int)*len);
+ goto exit;
}
/* receive the result: */
@@ -405,12 +410,12 @@ int line6_read_data(struct usb_line6 *li
0x0013, 0x0000, data, datalen,
LINE6_TIMEOUT * HZ);
- if (ret < 0) {
+ if (ret < 0)
dev_err(line6->ifcdev, "read failed (error %d)\n", ret);
- return ret;
- }
- return 0;
+exit:
+ kfree(len);
+ return ret;
}
EXPORT_SYMBOL_GPL(line6_read_data);
@@ -422,12 +427,16 @@ int line6_write_data(struct usb_line6 *l
{
struct usb_device *usbdev = line6->usbdev;
int ret;
- unsigned char status;
+ unsigned char *status;
int count;
if (address > 0xffff || datalen > 0xffff)
return -EINVAL;
+ status = kmalloc(sizeof(*status), GFP_KERNEL);
+ if (!status)
+ return -ENOMEM;
+
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
0x0022, address, data, datalen,
@@ -436,7 +445,7 @@ int line6_write_data(struct usb_line6 *l
if (ret < 0) {
dev_err(line6->ifcdev,
"write request failed (error %d)\n", ret);
- return ret;
+ goto exit;
}
for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) {
@@ -447,28 +456,29 @@ int line6_write_data(struct usb_line6 *l
USB_TYPE_VENDOR | USB_RECIP_DEVICE |
USB_DIR_IN,
0x0012, 0x0000,
- &status, 1, LINE6_TIMEOUT * HZ);
+ status, 1, LINE6_TIMEOUT * HZ);
if (ret < 0) {
dev_err(line6->ifcdev,
"receiving status failed (error %d)\n", ret);
- return ret;
+ goto exit;
}
- if (status != 0xff)
+ if (*status != 0xff)
break;
}
- if (status == 0xff) {
+ if (*status == 0xff) {
dev_err(line6->ifcdev, "write failed after %d retries\n",
count);
- return -EIO;
- } else if (status != 0) {
+ ret = -EIO;
+ } else if (*status != 0) {
dev_err(line6->ifcdev, "write failed (error %d)\n", ret);
- return -EIO;
+ ret = -EIO;
}
-
- return 0;
+exit:
+ kfree(status);
+ return ret;
}
EXPORT_SYMBOL_GPL(line6_write_data);
--- a/sound/usb/line6/podhd.c
+++ b/sound/usb/line6/podhd.c
@@ -225,28 +225,32 @@ static void podhd_startup_start_workqueu
static int podhd_dev_start(struct usb_line6_podhd *pod)
{
int ret;
- u8 init_bytes[8];
+ u8 *init_bytes;
int i;
struct usb_device *usbdev = pod->line6.usbdev;
+ init_bytes = kmalloc(8, GFP_KERNEL);
+ if (!init_bytes)
+ return -ENOMEM;
+
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0),
0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
0x11, 0,
NULL, 0, LINE6_TIMEOUT * HZ);
if (ret < 0) {
dev_err(pod->line6.ifcdev, "read request failed (error %d)\n", ret);
- return ret;
+ goto exit;
}
/* NOTE: looks like some kind of ping message */
ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x11, 0x0,
- &init_bytes, 3, LINE6_TIMEOUT * HZ);
+ init_bytes, 3, LINE6_TIMEOUT * HZ);
if (ret < 0) {
dev_err(pod->line6.ifcdev,
"receive length failed (error %d)\n", ret);
- return ret;
+ goto exit;
}
pod->firmware_version =
@@ -255,7 +259,7 @@ static int podhd_dev_start(struct usb_li
for (i = 0; i <= 16; i++) {
ret = line6_read_data(&pod->line6, 0xf000 + 0x08 * i, init_bytes, 8);
if (ret < 0)
- return ret;
+ goto exit;
}
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0),
@@ -263,10 +267,9 @@ static int podhd_dev_start(struct usb_li
USB_TYPE_STANDARD | USB_RECIP_DEVICE | USB_DIR_OUT,
1, 0,
NULL, 0, LINE6_TIMEOUT * HZ);
- if (ret < 0)
- return ret;
-
- return 0;
+exit:
+ kfree(init_bytes);
+ return ret;
}
static void podhd_startup_workqueue(struct work_struct *work)
--- a/sound/usb/line6/toneport.c
+++ b/sound/usb/line6/toneport.c
@@ -365,16 +365,21 @@ static bool toneport_has_source_select(s
/*
Setup Toneport device.
*/
-static void toneport_setup(struct usb_line6_toneport *toneport)
+static int toneport_setup(struct usb_line6_toneport *toneport)
{
- u32 ticks;
+ u32 *ticks;
struct usb_line6 *line6 = &toneport->line6;
struct usb_device *usbdev = line6->usbdev;
+ ticks = kmalloc(sizeof(*ticks), GFP_KERNEL);
+ if (!ticks)
+ return -ENOMEM;
+
/* sync time on device with host: */
/* note: 32-bit timestamps overflow in year 2106 */
- ticks = (u32)ktime_get_real_seconds();
- line6_write_data(line6, 0x80c6, &ticks, 4);
+ *ticks = (u32)ktime_get_real_seconds();
+ line6_write_data(line6, 0x80c6, ticks, 4);
+ kfree(ticks);
/* enable device: */
toneport_send_cmd(usbdev, 0x0301, 0x0000);
@@ -389,6 +394,7 @@ static void toneport_setup(struct usb_li
toneport_update_led(toneport);
mod_timer(&toneport->timer, jiffies + TONEPORT_PCM_DELAY * HZ);
+ return 0;
}
/*
@@ -451,7 +457,9 @@ static int toneport_init(struct usb_line
return err;
}
- toneport_setup(toneport);
+ err = toneport_setup(toneport);
+ if (err)
+ return err;
/* register audio system: */
return snd_card_register(line6->card);
@@ -463,7 +471,11 @@ static int toneport_init(struct usb_line
*/
static int toneport_reset_resume(struct usb_interface *interface)
{
- toneport_setup(usb_get_intfdata(interface));
+ int err;
+
+ err = toneport_setup(usb_get_intfdata(interface));
+ if (err)
+ return err;
return line6_resume(interface);
}
#endif
Powered by blists - more mailing lists