linux-kernel - [PATCH 0/2] hwmon: scmi: Scale values to target desired HWMON units

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190506224109.9357-1-f.fainelli@gmail.com>
Date:   Mon,  6 May 2019 15:41:07 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     linux-kernel@...r.kernel.org
Cc:     bcm-kernel-feedback-list@...adcom.com,
        Florian Fainelli <f.fainelli@...il.com>,
        Sudeep Holla <sudeep.holla@....com>,
        Jean Delvare <jdelvare@...e.com>,
        Guenter Roeck <linux@...ck-us.net>,
        linux-arm-kernel@...ts.infradead.org,
        linux-hwmon@...r.kernel.org (open list:HARDWARE MONITORING)
Subject: [PATCH 0/2] hwmon: scmi: Scale values to target desired HWMON units

Hi Sudeep, Guenter,

This patch series adds support for scaling SCMI sensor values read from
firmware. Sudeep, let me know if you think we should be treating scale
== 0 as a special value to preserve some firmware compatibility (not
that this would be desired).

Thanks!

Florian Fainelli (2):
  firmware: arm_scmi: Fetch and store sensor scale
  hwmon: scmi: Scale values to target desired HWMON units

 drivers/firmware/arm_scmi/sensors.c |  7 +++-
 drivers/hwmon/scmi-hwmon.c          | 55 ++++++++++++++++++++++++-----
 include/linux/scmi_protocol.h       |  1 +
 3 files changed, 53 insertions(+), 10 deletions(-)

-- 
2.17.1