linux-kernel - Re: [RFC PATCH 1/4] dt-bindings: input: Add support for the MPR121 without interrupt line

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <8dd2efa1-0fc9-d99a-d015-323350e1abdc@ysoft.com>
Date:   Mon, 6 May 2019 14:18:04 +0200
From:   Michal Vokáč <michal.vokac@...ft.com>
To:     Rob Herring <robh@...nel.org>
Cc:     Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Mark Rutland <mark.rutland@....com>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        linux-input@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Pengutronix Kernel Team <kernel@...gutronix.de>
Subject: Re: [RFC PATCH 1/4] dt-bindings: input: Add support for the MPR121
 without interrupt line

On 02. 05. 19 2:48, Rob Herring wrote:
> On Fri, Apr 26, 2019 at 10:30:17AM +0200, Michal Vokáč wrote:
>> Normally, the MPR121 controller uses separate interrupt line to notify
>> the I2C host that a key was touched/released. To support platforms that
>> can not use the interrupt line, polling of the MPR121 registers can be
>> used.
> 
> Other than making the 'interrupts' property optional, that's a driver
> change, not a DT change. IOW, we shouldn't need a whole new binding.
> 

OK, I will update the existing binding instead.

Thank you,
Michal

>>
>> Signed-off-by: Michal Vokáč <michal.vokac@...ft.com>
>> ---
>>   .../bindings/input/mpr121-touchkey-polled.txt      | 26 ++++++++++++++++++++++
>>   1 file changed, 26 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/input/mpr121-touchkey-polled.txt
>>
>> diff --git a/Documentation/devicetree/bindings/input/mpr121-touchkey-polled.txt b/Documentation/devicetree/bindings/input/mpr121-touchkey-polled.txt
>> new file mode 100644
>> index 000000000000..6bb1d312614c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/input/mpr121-touchkey-polled.txt
>> @@ -0,0 +1,26 @@
>> +* Freescale MPR121 Controller without interrupt line
>> +
>> +Required Properties:
>> +- compatible:		Should be "fsl,mpr121-touchkey-polled"
>> +- reg:			The I2C slave address of the device.
>> +- vdd-supply:		Phandle to the Vdd power supply.
>> +- linux,keycodes:	Specifies an array of numeric keycode values to
>> +			be used for reporting button presses. The array can
>> +			contain up to 12 entries.
>> +
>> +Optional Properties:
>> +- autorepeat:		Enable autorepeat feature.
>> +
>> +Example:
>> +
>> +#include "dt-bindings/input/input.h"
>> +
>> +	touchkeys: keys@5a {
>> +		compatible = "fsl,mpr121-touchkey-polled";
>> +		reg = <0x5a>;
>> +		autorepeat;
>> +		vdd-supply = <&ldo4_reg>;
>> +		linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>,
>> +				<KEY_4> <KEY_5>, <KEY_6>, <KEY_7>,
>> +				<KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>;
>> +	};
>> -- 
>> 2.1.4
>>