linux-kernel - Re: [PATCH v7 01/13] clk: samsung: add needed IDs for DMC clocks in Exynos5420

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <55e89fc7-6f22-b384-adbf-40c68618bdac@partner.samsung.com>
Date:   Tue, 7 May 2019 10:51:55 +0200
From:   Lukasz Luba <l.luba@...tner.samsung.com>
To:     Chanwoo Choi <cw00.choi@...sung.com>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
        linux-samsung-soc@...r.kernel.org
Cc:     b.zolnierkie@...sung.com, krzk@...nel.org, kgene@...nel.org,
        kyungmin.park@...sung.com, m.szyprowski@...sung.com,
        s.nawrocki@...sung.com, myungjoo.ham@...sung.com,
        keescook@...omium.org, tony@...mide.com, jroedel@...e.de,
        treding@...dia.com, digetx@...il.com, willy.mh.wolff.ml@...il.com
Subject: Re: [PATCH v7 01/13] clk: samsung: add needed IDs for DMC clocks in
 Exynos5420

Hi Chanwoo,

On 5/7/19 9:33 AM, Chanwoo Choi wrote:
> Hi Lukasz,
> 
> On 19. 5. 7. 오전 12:11, Lukasz Luba wrote:
>> Define new IDs for clocks used by Dynamic Memory Controller in
>> Exynos5422 SoC.
>>
>> Acked-by: Rob Herring <robh@...nel.org>
>> Signed-off-by: Lukasz Luba <l.luba@...tner.samsung.com>
>> ---
>>   include/dt-bindings/clock/exynos5420.h | 28 ++++++++++++++++++++++------
>>   1 file changed, 22 insertions(+), 6 deletions(-)
>>
>> diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h
>> index 355f469..bf50d8a 100644
>> --- a/include/dt-bindings/clock/exynos5420.h
>> +++ b/include/dt-bindings/clock/exynos5420.h
>> @@ -60,6 +60,7 @@
>>   #define CLK_MAU_EPLL		159
>>   #define CLK_SCLK_HSIC_12M	160
>>   #define CLK_SCLK_MPHY_IXTAL24	161
>> +#define CLK_SCLK_BPLL		162
>>   
>>   /* gate clocks */
>>   #define CLK_UART0		257
>> @@ -195,6 +196,16 @@
>>   #define CLK_ACLK432_CAM		518
>>   #define CLK_ACLK_FL1550_CAM	519
>>   #define CLK_ACLK550_CAM		520
>> +#define CLK_CLKM_PHY0		521
>> +#define CLK_CLKM_PHY1		522
>> +#define CLK_ACLK_PPMU_DREX0_0	523
>> +#define CLK_ACLK_PPMU_DREX0_1	524
>> +#define CLK_ACLK_PPMU_DREX1_0	525
>> +#define CLK_ACLK_PPMU_DREX1_1	526
>> +#define CLK_PCLK_PPMU_DREX0_0	527
>> +#define CLK_PCLK_PPMU_DREX0_1	528
>> +#define CLK_PCLK_PPMU_DREX1_0	529
>> +#define CLK_PCLK_PPMU_DREX1_1	530
>>   
>>   /* mux clocks */
>>   #define CLK_MOUT_HDMI		640
>> @@ -217,6 +228,8 @@
>>   #define CLK_MOUT_EPLL		657
>>   #define CLK_MOUT_MAU_EPLL	658
>>   #define CLK_MOUT_USER_MAU_EPLL	659
>> +#define CLK_MOUT_SCLK_SPLL	660
>> +#define CLK_MOUT_MX_MSPLL_CCORE_PHY	661
>>   
>>   /* divider clocks */
>>   #define CLK_DOUT_PIXEL		768
>> @@ -243,13 +256,16 @@
>>   #define CLK_DOUT_ACLK300_GSCL	789
>>   #define CLK_DOUT_ACLK400_DISP1	790
>>   #define CLK_DOUT_PCLK_CDREX	791
>> -#define CLK_DOUT_SCLK_CDREX	792
>> -#define CLK_DOUT_ACLK_CDREX1	793
>> -#define CLK_DOUT_CCLK_DREX0	794
>> -#define CLK_DOUT_CLK2X_PHY0	795
>> -#define CLK_DOUT_PCLK_CORE_MEM	796
> 
> The your previous patch didn't change the id number
> of already exiting clocks. It cause the fault.
> In order to keep the compatibility, you keep
> the original id number without modification.
True, the previous patch didn't change these IDs.
I have not seen any faults during builds and stress tests, though.
> 
> Please don't change the id number of the existing clocks
> and then just add the new clocks.
OK, I will add CLK_DOUT_PCLK_DREX0	and CLK_DOUT_PCLK_DREX1
at the end:
------------------>8--------------------------
@@ -248,8 +261,11 @@
  #define CLK_DOUT_CCLK_DREX0    794
  #define CLK_DOUT_CLK2X_PHY0    795
  #define CLK_DOUT_PCLK_CORE_MEM 796
+#define CLK_FF_DOUT_SPLL2      797
+#define CLK_DOUT_PCLK_DREX0    798
+#define CLK_DOUT_PCLK_DREX1    799

  /* must be greater than maximal clock id */
-#define CLK_NR_CLKS            797
+#define CLK_NR_CLKS            800
-----------------8<---------------------------

Can I add your ack in the modified version?

Regards,
Lukasz
> 
> 
>> +#define CLK_DOUT_PCLK_DREX0	792
>> +#define CLK_DOUT_PCLK_DREX1	793
>> +#define CLK_DOUT_SCLK_CDREX	794
>> +#define CLK_DOUT_ACLK_CDREX1	795
>> +#define CLK_DOUT_CCLK_DREX0	796
>> +#define CLK_DOUT_CLK2X_PHY0	797
>> +#define CLK_DOUT_PCLK_CORE_MEM	798
>> +#define CLK_FF_DOUT_SPLL2	799
>>   
>>   /* must be greater than maximal clock id */
>> -#define CLK_NR_CLKS		797
>> +#define CLK_NR_CLKS		800
>>   
>>   #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5420_H */
>>
>