[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190507115726.23714-2-glaroque@baylibre.com>
Date: Tue, 7 May 2019 13:57:21 +0200
From: Guillaume La Roque <glaroque@...libre.com>
To: linus.walleij@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
khilman@...libre.com
Cc: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 1/6] dt-bindings: pinctrl: add a 'drive-strength-microamp' property
This property allow drive-strength parameter in uA instead of mA.
Signed-off-by: Guillaume La Roque <glaroque@...libre.com>
---
Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index cef2b5855d60..84adce9f2a75 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -258,6 +258,7 @@ drive-push-pull - drive actively high and low
drive-open-drain - drive with open drain
drive-open-source - drive with open source
drive-strength - sink or source at most X mA
+drive-strength-microamp - sink or source at most X uA
input-enable - enable input on pin (no effect on output, such as
enabling an input buffer)
input-disable - disable input on pin (no effect on output, such as
@@ -326,6 +327,8 @@ arguments are described below.
- drive-strength takes as argument the target strength in mA.
+- drive-strength-microamp takes as argument the target strength in uA.
+
- input-debounce takes the debounce time in usec as argument
or 0 to disable debouncing
--
2.17.1
Powered by blists - more mailing lists