[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190507143615.28477-2-dev@pschenker.ch>
Date: Tue, 7 May 2019 16:36:12 +0200
From: Philippe Schenker <dev@...henker.ch>
To: linux-iio@...r.kernel.org, Jonathan Cameron <jic23@...nel.org>,
Stefan Agner <stefan@...er.ch>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>
Cc: Marcel Ziswiler <marcel.ziswiler@...adex.com>,
David Laight <David.Laight@...LAB.COM>, dev@...henker.ch,
Philippe Schenker <philippe.schenker@...adex.com>,
Max Krummenacher <max.krummenacher@...adex.com>,
Alexandre Torgue <alexandre.torgue@...com>,
linux-kernel@...r.kernel.org, Lee Jones <lee.jones@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 2/5] iio: stmpe-adc: Reinit completion struct on begin conversion
From: Philippe Schenker <philippe.schenker@...adex.com>
In some cases, the wait_completion got interrupted. This caused the
error-handling to mutex_unlock the function. The before turned on
interrupt then got called anyway. In the ISR then completion() was
called causing wrong adc-values returned in a following adc-readout.
Reinitialise completion struct to make sure the counter is zero
when beginning a new adc-conversion.
Signed-off-by: Philippe Schenker <philippe.schenker@...adex.com>
---
drivers/iio/adc/stmpe-adc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
index 9ec338ba3440..b3872eb37293 100644
--- a/drivers/iio/adc/stmpe-adc.c
+++ b/drivers/iio/adc/stmpe-adc.c
@@ -65,6 +65,8 @@ static int stmpe_read_voltage(struct stmpe_adc *info,
mutex_lock(&info->lock);
+ reinit_completion(&info->completion);
+
info->channel = (u8)chan->channel;
if (info->channel > STMPE_ADC_LAST_NR) {
@@ -105,6 +107,8 @@ static int stmpe_read_temp(struct stmpe_adc *info,
mutex_lock(&info->lock);
+ reinit_completion(&info->completion);
+
info->channel = (u8)chan->channel;
if (info->channel != STMPE_TEMP_CHANNEL) {
--
2.21.0
Powered by blists - more mailing lists