[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1557242108-13580-2-git-send-email-sagar.kadam@sifive.com>
Date: Tue, 7 May 2019 20:45:06 +0530
From: Sagar Shrikant Kadam <sagar.kadam@...ive.com>
To: robh+dt@...nel.org, mark.rutland@....com, peter@...sgaard.com,
andrew@...n.ch, palmer@...ive.com, paul.walmsley@...ive.com,
sagar.kadam@...ive.com, linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org, linux-riscv@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 v2 1/3] dt-bindings: i2c: extend existing opencore bindings.
Add FU540-C000 specific device tree bindings to already
available i2-ocores file. This device is available on
HiFive Unleashed Rev A00 board.
Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@...ive.com>
---
Documentation/devicetree/bindings/i2c/i2c-ocores.txt | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
index 17bef9a..f6bcf90 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
@@ -2,6 +2,7 @@ Device tree configuration for i2c-ocores
Required properties:
- compatible : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
+ "sifive,fu540-c000-i2c" or "sifive,i2c0"
- reg : bus address start and address range size of device
- interrupts : interrupt number
- clocks : handle to the controller clock; see the note below.
@@ -67,3 +68,22 @@ or
reg = <0x60>;
};
};
+or
+ /*
+ An Opencore based I2C node in FU540-C000 chip from SiFive
+ This chip has a hardware erratum for broken IRQ
+ so it's recommended not to define interrupt in the device node
+ */
+ i2c@...30000 {
+ compatible = "sifive,i2c0","sifive,fu540-c000-i2c";
+ reg = <0x0 0x10030000 0x0 0x1000>;
+ reg-names = "i2c-control";
+ clocks = <&tlclk>;
+ clock-frequency = <100000>;
+
+ reg-shift = <2>;
+ reg-io-width = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
--
1.9.1
--
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. If you are not the intended recipient of this message please do
not read, copy, use or disclose this communication and notify the sender
immediately. It should be noted that any review, retransmission,
dissemination or other use of, or taking action or reliance upon, this
information by persons or entities other than the intended recipient is
prohibited.
Powered by blists - more mailing lists