linux-kernel - Re: [PATCH v5 2/2] hwmon: scmi: Scale values to target desired HWMON units

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190508211017.GA29998@roeck-us.net>
Date:   Wed, 8 May 2019 14:10:17 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     Florian Fainelli <f.fainelli@...il.com>
Cc:     linux-kernel@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com,
        Sudeep Holla <sudeep.holla@....com>,
        Jean Delvare <jdelvare@...e.com>,
        linux-arm-kernel@...ts.infradead.org,
        "open list:HARDWARE MONITORING" <linux-hwmon@...r.kernel.org>
Subject: Re: [PATCH v5 2/2] hwmon: scmi: Scale values to target desired HWMON
 units

On Wed, May 08, 2019 at 11:46:35AM -0700, Florian Fainelli wrote:
> If the SCMI firmware implementation is reporting values in a scale that
> is different from the HWMON units, we need to scale up or down the value
> according to how far appart they are.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@...il.com>

Reviewed-by: Guenter Roeck <linux@...ck-us.net>

Question is which tree this series should go through. I am fine with arm.

Thanks,
Guenter

> ---
>  drivers/hwmon/scmi-hwmon.c | 45 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
> 
> diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
> index a80183a488c5..2c7b87edf5aa 100644
> --- a/drivers/hwmon/scmi-hwmon.c
> +++ b/drivers/hwmon/scmi-hwmon.c
> @@ -18,6 +18,47 @@ struct scmi_sensors {
>  	const struct scmi_sensor_info **info[hwmon_max];
>  };
>  
> +static inline u64 __pow10(u8 x)
> +{
> +	u64 r = 1;
> +
> +	while (x--)
> +		r *= 10;
> +
> +	return r;
> +}
> +
> +static int scmi_hwmon_scale(const struct scmi_sensor_info *sensor, u64 *value)
> +{
> +	s8 scale = sensor->scale;
> +	u64 f;
> +
> +	switch (sensor->type) {
> +	case TEMPERATURE_C:
> +	case VOLTAGE:
> +	case CURRENT:
> +		scale += 3;
> +		break;
> +	case POWER:
> +	case ENERGY:
> +		scale += 6;
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	if (abs(scale) > 19)
> +		return -E2BIG;
> +
> +	f = __pow10(abs(scale));
> +	if (scale > 0)
> +		*value *= f;
> +	else
> +		*value = div64_u64(*value, f);
> +
> +        return 0;
> +}
> +
>  static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
>  			   u32 attr, int channel, long *val)
>  {
> @@ -29,6 +70,10 @@ static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
>  
>  	sensor = *(scmi_sensors->info[type] + channel);
>  	ret = h->sensor_ops->reading_get(h, sensor->id, false, &value);
> +	if (ret)
> +		return ret;
> +
> +	ret = scmi_hwmon_scale(sensor, &value);
>  	if (!ret)
>  		*val = value;
>  
> -- 
> 2.17.1
>