| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 07 May 2019 22:03:12 -0700
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] first round of SCSI updates for the 5.1+ merge window
This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi,
hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas. Plus number of minor
changes, spelling fixes and other trivia.
We've got a trivial conflict with Kees tree where two differently
authored patches try to add fall through statements in lpfc_els.c.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Ajish Koshy (1):
scsi: smartpqi: add H3C controller IDs
Alan Adamson (1):
scsi: target: Add device product id and revision configfs attributes
Anders Roxell (1):
scsi: ufs-mediatek: Add missing MODULE_* information
Andrew Vasquez (3):
scsi: qla2xxx: Further limit FLASH region write access from SysFS
scsi: qla2xxx: Fix incorrect region-size setting in optrom SYSFS routines
scsi: qedf: Correct the memory barriers in qedf_ring_doorbell
Anil Gurumurthy (1):
scsi: qla2xxx: Cleanup redundant qla2x00_abort_all_cmds during unload
Arnd Bergmann (2):
scsi: qla4xxx: avoid freeing unallocated dma memory
scsi: lpfc: avoid uninitialized variable warning
Bart Van Assche (81):
scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session()
scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory
scsi: qla2xxx: Fix hardirq-unsafe locking
scsi: qla2xxx: Complain loudly about reference count underflow
scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware
scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures
scsi: qla2xxx: Check the size of firmware data structures at compile time
scsi: qla2xxx: Pass little-endian values to the firmware
scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands
scsi: qla2xxx: Use an on-stack completion in qla24xx_control_vp()
scsi: qla2xxx: Make qla24xx_async_abort_cmd() static
scsi: qla2xxx: Remove unnecessary locking from the target code
scsi: qla2xxx: Remove qla_tgt_cmd.released
scsi: qla2xxx: Complain if a command is released that is owned by the firmware
scsi: qla2xxx: target: Fix offline port handling and host reset handling
scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending()
scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd()
scsi: qla2xxx: Simplify qlt_send_term_imm_notif()
scsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpair_sp_free_dma()
scsi: qla2xxx: Fix a qla24xx_enable_msix() error path
scsi: qla2xxx: Avoid that qla2x00_mem_free() crashes if called twice
scsi: qla2xxx: Make qla2x00_mem_free() easier to verify
scsi: qla2xxx: Increase the size of the mailbox arrays from 4 to 8
scsi: qla2xxx: Log the status code if a firmware command fails
scsi: qla2xxx: Avoid that Coverity complains about dereferencing a NULL rport pointer
scsi: qla2xxx: Remove the fcport test from qla_nvme_abort_work()
scsi: qla2xxx: Uninline qla2x00_init_timer()
scsi: qla2xxx: Move qla2x00_is_reserved_id() from qla_inline.h into qla_init.c
scsi: qla2xxx: Move qla2x00_clear_loop_id() from qla_inline.h into qla_init.c
scsi: qla2xxx: Remove a set-but-not-used variable
scsi: qla2xxx: Declare qla2x00_find_new_loop_id() static
scsi: qla2xxx: Move qla2x00_set_reserved_loop_ids() definition
scsi: qla2xxx: Fix a format specifier
scsi: qla2xxx: Update two source code comments
scsi: sd: Revert "Rely on the driver core for asynchronous probing"
scsi: sd: Revert "Inline sd_probe_part2()"
scsi: qla2xxx: Move qla2x00_set_fcport_state() from a .h into a .c file
scsi: qla2xxx: Remove two superfluous casts
scsi: qla2xxx: Remove qla_tgt_cmd.data_work and qla_tgt_cmd.data_work_free
scsi: qla2xxx: Move the <linux/io-64-nonatomic-lo-hi.h> include directive
scsi: qla2xxx: Declare qla24xx_build_scsi_crc_2_iocbs() static
scsi: qla2xxx: Move the port_state_str[] definition from a .h to a .c file
scsi: qla2xxx: Insert spaces where required
scsi: qla2xxx: Fix formatting of pointer types
scsi: qla2xxx: Leave a blank line after declarations
scsi: qla2xxx: Use tabs to indent code
scsi: target/iscsi: Make sure PDU processing continues if parsing a command fails
scsi: target/iscsi: Make iscsit_map_iovec() more robust
scsi: target/iscsi: Handle too large immediate data buffers correctly
scsi: target/iscsi: Only send R2T if needed
scsi: target/iscsi: Detect conn_cmd_list corruption early
scsi: target/core: Make the XCOPY setup code easier to read by inlining two functions
scsi: target/core: Simplify LUN initialization in XCOPY implementation
scsi: target/core: Remove a set-but-not-used member variable from the XCOPY implementation
scsi: target/core: Rework the SPC-2 reservation handling code
scsi: target/core: Fix a race condition in the LUN lookup code
scsi: tcm_qla2xxx: Minimize #include directives
scsi: qla2xxx: Unregister resources in the opposite order of the registration order
scsi: qla2xxx: Unregister chrdev if module initialization fails
scsi: qla2xxx: Use get/put_unaligned where appropriate
scsi: qla2xxx: Make qla2x00_process_response_queue() easier to read
scsi: qla2xxx: Reduce the number of forward declarations
scsi: qla2xxx: Declare local symbols static
scsi: qla2xxx: Use ARRAY_SIZE() in the definition of QLA_LAST_SPEED
scsi: qla2xxx: Remove a comment that refers to the SCSI host lock
scsi: qla2xxx: Change a stack variable into a static const variable
scsi: scsi_transport_fc: Declare wwn_to_u64() argument const
scsi: lpfc: Fix a recently introduced compiler warning
scsi: lpfc: Change smp_processor_id() into raw_smp_processor_id()
scsi: lpfc: Remove unused functions
scsi: lpfc: Remove set-but-not-used variables
scsi: lpfc: Move trunk_errmsg[] from a header file into a .c file
scsi: lpfc: Annotate switch/case fall-through
scsi: lpfc: Fix indentation and balance braces
scsi: lpfc: Declare local functions static
scsi: sd: Fix a race between closing an sd device and sd I/O
scsi: sd: Inline sd_probe_part2()
scsi: sd: Rely on the driver core for asynchronous probing
scsi: core: Avoid that a kernel warning appears during system resume
scsi: core: Also call destroy_rcu_head() for passthrough requests
scsi: core: Remove OSD include files
Chad Dupuis (15):
scsi: qedf: Add port_id for fcport into initiate_cleanup debug message
scsi: qedf: Add LBA to underrun debug messages
scsi: qedf: Print scsi_cmd backpointer in good completion path if the command is still being used
scsi: qedf: Add driver state to 'driver_stats' debugfs node
scsi: qedf: Change MSI-X load error message
scsi: qedf: Check both the FCF and fabric ID before servicing clear virtual link
scsi: qedf: Add missing return in qedf_scsi_done()
scsi: qedf: Wait for upload and link down processing during soft ctx reset
scsi: qedf: Add additional checks for io_req->sc_cmd validity
scsi: qedf: Add missing fc_disc_init call after allocating lport
scsi: qedf: Use a separate completion for cleanup commands
scsi: qedf: Simplify s/g list mapping
scsi: qedf: Add missing return in qedf_post_io_req() in the fcport offload check
scsi: qedf: Correct xid range overlap between offloaded requests and libfc requests
scsi: qedf: Do not retry ELS request if qedf_alloc_cmd fails
Christoph Hellwig (2):
scsi: aic7xxx: improve the Kconfig entry
scsi: core: remove the scsi_ioctl_reset export
Colin Ian King (18):
scsi: aic7xxx: fix spelling mistake "recevied" -> "received"
scsi: megaraid_sas: fix spelling mistake "oustanding" -> "outstanding"
scsi: qedi: fix spelling mistake "oflload" -> "offload"
scsi: qedf: remove memset/memcpy to nfunc and use func instead
scsi: cxgbi: remove redundant __kfree_skb call on skb and free cst->atid
scsi: qla2xxx: fix spelling mistake "alredy" -> "already"
scsi: pm8001: fix spelling mistake, interupt -> interrupt
scsi: pm8001: clean up dead code when PM8001_USE_MSIX is defined
scsi: qedi: remove declaration of nvm_image from stack
scsi: mpt3sas: fix indentation issue
scsi: libcxgbi: remove uninitialized variable len
scsi: target: fix unsigned comparision with less than zero
scsi: mptfusion: fix indentation issues
scsi: mvsas: clean up a few indentation issues
scsi: qlogicfas408: clean up a couple of indentation issues
scsi: dpt_i2o: clean up indentation issues, remove spaces
scsi: atp870u: clean up code style and indentation issues
scsi: pm8001: clean up various indentation issues
Dave Carroll (1):
scsi: aacraid: Insure we don't access PCIe space during AER/EEH
Ding Xiang (1):
scsi: bnx2fc: remove unneeded variable
Don Brace (7):
scsi: smartpqi: bump driver version
scsi: smartpqi: add spdx
scsi: smartpqi: update copyright
scsi: hpsa: bump driver version
scsi: hpsa: remove timeout from TURs
scsi: hpsa: correct device id issues
scsi: hpsa: check for lv removal
Dongli Zhang (4):
scsi: smartpqi: Use HCTX_TYPE_DEFAULT for blk_mq_tag_set->map
scsi: qla2xxx: Use HCTX_TYPE_DEFAULT for blk_mq_tag_set->map
scsi: virtio_scsi: Use HCTX_TYPE_DEFAULT for blk_mq_tag_set->map
scsi: core: Use HCTX_TYPE_DEFAULT for blk_mq_tag_set->map
Finn Thain (2):
scsi: NCR5380: Remove set but unused variable
scsi: NCR5380: Avoid compiler warning when -Wimplicit-fallthrough is enabled
Giridhar Malavali (8):
scsi: qla2xxx: Change abort wait_loop from msleep to wait_event_timeout
scsi: qla2xxx: Fix driver unload when FC-NVMe LUNs are connected
scsi: qla2xxx: Set remote port devloss timeout to 0
scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe
scsi: qla2xxx: Increase the max_sgl_segments to 1024
scsi: qla2xxx: Reset the FCF_ASYNC_{SENT|ACTIVE} flags
scsi: qla2xxx: Set the qpair in SRB to NULL when SRB is released
scsi: qla2xxx: Set the SCSI command result before calling the command done
Gustavo A. R. Silva (2):
scsi: mptscsih: Mark expected switch fall-throughs
scsi: mptfusion: mark expected switch fall-through
Hannes Reinecke (6):
scsi: scsi_transport_fc: nvme: display FC-NVMe port roles
scsi: qedf: fc_rport_priv reference counting fixes
scsi: qedf: fixup bit operations
scsi: qedf: fixup locking in qedf_restart_rport()
scsi: qedf: missing kref_put in qedf_xmit()
scsi: core: reshuffle no_scsi2_lun_in_cdb for better alignment
Himanshu Madhani (5):
scsi: qla2xxx: Silence Successful ELS IOCB message
scsi: qla2xxx: Fix read offset in qla24xx_load_risc_flash()
scsi: qla2xxx: Update driver version to 10.01.00.16-k
scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID
scsi: qla2xxx: Update driver version to 10.01.00.15-k
James Bottomley (1):
scsi: lpfc: Fix build error
James Smart (36):
scsi: lpfc: add support for posting FC events on FPIN reception
scsi: scsi_transport_fc: Add FPIN fc event codes
scsi: scsi_transport_fc: refactor event posting routines
scsi: fc: add FPIN ELS definition
scsi: lpfc: Fix missing wakeups on abort threads
scsi: lpfc: Fixup eq_clr_intr references
scsi: lpfc: Update lpfc version to 12.2.0.1
scsi: lpfc: Update Copyright in driver version
scsi: lpfc: Enhance 6072 log string
scsi: lpfc: Fix duplicate log message numbers
scsi: lpfc: Specify node affinity for queue memory allocation
scsi: lpfc: Reduce memory footprint for lpfc_queue
scsi: lpfc: Add loopback testing to trunking mode
scsi: lpfc: Fix link speed reporting for 4-link trunk
scsi: lpfc: Fix handling of trunk links state reporting
scsi: lpfc: Fix protocol support on G6 and G7 adapters
scsi: lpfc: Correct boot bios information to FDMI registration
scsi: lpfc: Fix HDMI2 registration string for symbolic name
scsi: lpfc: Fix fc4type information for FDMI
scsi: lpfc: Fix FDMI manufacturer attribute value
scsi: lpfc: Fix io lost on host resets
scsi: lpfc: Fix mailbox hang on adapter init
scsi: lpfc: Fix driver crash in target reset handler
scsi: lpfc: Correct localport timeout duration error
scsi: lpfc: Convert bootstrap mbx polling from msleep to udelay
scsi: lpfc: Coordinate adapter error handling with offline handling
scsi: lpfc: Stop adapter if pci errors detected
scsi: lpfc: Fix deadlock due to nested hbalock call
scsi: lpfc: Fix nvmet handling of first burst cmd
scsi: lpfc: Fix lpfc_nvmet_mrq attribute handling when 0
scsi: lpfc: Fix nvmet async receive buffer replenishment
scsi: lpfc: Fix location of SCSI ktime counters
scsi: lpfc: Fix SLI3 commands being issued on SLI4 devices
scsi: lpfc: Fix use-after-free mailbox cmd completion
scsi: lpfc: Resolve irq-unsafe lockdep heirarchy warning in lpfc_io_free
scsi: lpfc: Resolve inconsistent check of hdwq in lpfc_scsi_cmd_iocb_cmpl
Jan Kotas (2):
scsi: ufs-cdns: Add support for UFSHCI with M31 PHY
scsi: dt-bindings: ufs-cdns: Update Cadence UFS compatibility list
Joe Carnuccio (12):
scsi: qla2xxx: Add 28xx flash primary/secondary status/image mechanism
scsi: qla2xxx: Simplification of register address used in qla_tmpl.c
scsi: qla2xxx: Correction and improvement to fwdt processing
scsi: qla2xxx: Update flash read/write routine
scsi: qla2xxx: Add support for multiple fwdump templates/segments
scsi: qla2xxx: Cleanups for NVRAM/Flash read/write path
scsi: qla2xxx: Correctly report max/min supported speeds
scsi: qla2xxx: Add Serdes support for ISP28XX
scsi: qla2xxx: Add Device ID for ISP28XX
scsi: qla2xxx: Fix routine qla27xx_dump_{mpi|ram}()
scsi: qla2xxx: Remove FW default template
scsi: qla2xxx: Add fw_attr and port_no SysFS node
John Garry (7):
scsi: libsas: Print expander PHY indexes in decimal
scsi: libsas: Do discovery on empty PHY to update PHY info
scsi: libsas: Inject revalidate event for root port event
scsi: libsas: Improve vague log in SAS rediscovery
scsi: libsas: Try to retain programmed min linkrate for SATA min pathway unmatch fixing
scsi: libsas: Stop hardcoding SAS address length
scsi: hisi_sas: Fix for setting the PHY linkrate when disconnected
Kangjie Lu (2):
scsi: qla4xxx: fix a potential NULL pointer dereference
scsi: ufs: fix a missing check of devm_reset_control_get
Kevin Barnett (1):
scsi: smartpqi: increase LUN reset timeout
Li Zhong (1):
scsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TARGET_PRESENT
Luo Jiaxing (3):
scsi: hisi_sas: Don't fail IT nexus reset for Open Reject timeout
scsi: hisi_sas: Don't hard reset disk during controller reset
scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
Manish Rangankar (2):
scsi: qedi: Adjust termination and offload ramrod timers
scsi: qedi: Abort ep termination if offload not scheduled
Martin K. Petersen (1):
scsi: sd: Quiesce warning if device does not report optimal I/O size
Matteo Croce (1):
scsi: be2iscsi: lpfc: fix typo
Maurizio Lombardi (1):
scsi: iscsi: flush running unbind operations when removing a session
Michael Hernandez (1):
scsi: qla2xxx: Secure flash update support for ISP28XX
Michael Kelley (2):
scsi: storvsc: Reduce default ring buffer size to 128 Kbytes
scsi: storvsc: Fix calculation of sub-channel count
Milan P. Gandhi (2):
scsi: qla2xxx: Fix a small typo in qla_bsg.c
scsi: qla2xxx: Fix comment alignment in qla_bsg.c
Ming Lei (1):
scsi: core: don't hold device refcount in IO path
Nathan Chancellor (3):
scsi: qla2xxx: Simplify conditional check again
scsi: gdth: Only call dma_free_coherent when buf is not NULL in ioc_general
scsi: ufs-mediatek: Avoid using ret uninitialized in ufs_mtk_setup_clocks
Pedro Sousa (1):
scsi: ufs: Fix RX_TERMINATION_FORCE_ENABLE define value
Quinn Tran (5):
scsi: qla2xxx: Fix device staying in blocked state
scsi: qla2xxx: Cleanup fcport memory to prevent leak
scsi: qla2xxx: Use mutex protection during qla2x00_sysfs_read_fw_dump()
scsi: qla2xxx: Fix fw dump corruption
scsi: qla2xxx: Fix FC-AL connection target discovery
Saurav Kashyap (14):
scsi: qedf: Update the driver version to 8.37.25.20
scsi: qedf: Add return value to log message if scsi_add_host fails
scsi: qedf: Print fcport information on wait for upload timeout
scsi: qedf: Check the return value of start_xmit
scsi: qedf: Log message if scsi_add_host fails
scsi: qedf: Check for fcoe_libfc_config failure
scsi: qedf: Add comment to display logging levels
scsi: qedf: Update the driver version to 8.37.25.19
scsi: qedf: Fix lport may be used uninitialized warning
scsi: qedf: Correctly handle refcounting of rdata
scsi: qedf: Check for tm_flags instead of cmd_type during cleanup
scsi: qedf: Don't send ABTS for under run scenario
scsi: qedf: Check for link state before processing LL2 packets and send fipvlan retries
scsi: qedf: Modify abort and tmf handler to handle edge condition and flush
Shyam Sundar (4):
scsi: qedf: Cleanup rrq_work after QEDF_CMD_OUTSTANDING is cleared
scsi: qedf: Add a flag to help debugging io_req which could not be cleaned
scsi: qedf: Don't queue anything if upload is in progress
scsi: qedf: Modify flush routine to handle all I/Os and TMF
Silvio Cesare (1):
scsi: lpfc: change snprintf to scnprintf for possible overflow
Sreekanth Reddy (1):
scsi: mpt3sas: Fix kernel panic during expander reset
Stanley Chu (16):
scsi: ufs: Print real incorrect request response code
scsi: dt-bindings: ufs: Add VCC capability on MediaTek UFS driver
scsi: dt-bindings: ufs: Remove custom property "<name>-fixed-regulator"
scsi: ufs: Remove "<name>-fixed-regulator" device tree property
scsi: ufs: Change "<name>-max-microamp" to non-mandatory property
scsi: ufs: Fix regulator load and icc-level configuration
scsi: ufs: Avoid configuring regulator with undefined voltage range
scsi: ufs: Remove unused min_uA field in struct ufs_vreg
scsi: MAINTAINERS: Add maintainer for MediaTek UFS driver
scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips
scsi: phy: mediatek: Add UFS M-PHY driver
scsi: dt-bindings: ufs: Add document for ufs-mediatek
scsi: dt-bindings: phy: Add document for phy-mtk-ufs
scsi: ufs-hisi: Re-factor ufshcd_get_pwr_dev_param
scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param
scsi: ufs: Introduce ufshcd_get_pwr_dev_param
Steffen Maier (3):
scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN
scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devices
scsi: zfcp: fix rport unblock if deleted SCSI devices on Scsi_Host
Suganath Prabu (6):
scsi: mpt3sas: Update mpt3sas driver version to 28.100.00.00
scsi: mpt3sas: Improve the threshold value and introduce module param
scsi: mpt3sas: Load balance to improve performance and avoid soft lockups
scsi: mpt3sas: Irq poll to avoid CPU hard lockups
scsi: mpt3sas: simplify interrupt handler
scsi: mpt3sas: Fix typo in request_desript_type
Tyrel Datwyler (6):
scsi: ibmvfc: Clean up transport events
scsi: ibmvfc: Byte swap status and error codes when logging
scsi: ibmvfc: Add failed PRLI to cmd_status lookup array
scsi: ibmvfc: Remove "failed" from logged errors
scsi: ibmvscsi: Fix empty event pool access during host removal
scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton
Varun Prakash (5):
scsi: csiostor: create per port irq affinity mask set
scsi: cxgb4i: fix incorrect spelling "reveive" -> "receive"
scsi: libcxgbi: update route finding logic
scsi: libcxgbi: find cxgbi device by MAC address
scsi: csiostor: fix missing data copy in csio_scsi_err_handler()
Xiang Chen (5):
scsi: hisi_sas: Some misc tidy-up
scsi: hisi_sas: allocate different SAS address for directly attached situation
scsi: hisi_sas: Adjust the printk format of functions hisi_sas_init_device()
scsi: hisi_sas: Remedy inconsistent PHY down state in software
scsi: hisi_sas: add host reset interface for test
Xiaofei Tan (1):
scsi: hisi_sas: Support all RAS events with MSI interrupts
Xose Vazquez Perez (1):
scsi: core: add new RDAC LENOVO/DE_Series device
YueHaibing (11):
scsi: qedf: remove set but not used variables
scsi: lpfc: Make lpfc_sli4_oas_verify static
scsi: megaraid_sas: Make megasas_host_device_list_query() static
scsi: qla2xxx: Remove useless set memory to zero use memset()
scsi: qedf: Remove set but not used variable 'fr_len'
scsi: pm8001: remove set but not used variables 'param, sas_ha'
scsi: ufs-mediatek: Fix platform_no_drv_owner.cocci warnings
scsi: ufs-mediatek: Make some symbols static
scsi: mvumi: Stop using plain integer as NULL pointer
scsi: qedi: Remove set but not used variable 'cls_sess'
scsi: mptfusion: remove set, but not used, variables
Zeng Guangyue (1):
scsi: ufs: remove unnecessary pointer evaluation
tangwenji (3):
scsi: target: alua: fix the tg_pt_gps_count
scsi: target: iscsi: Free conn_ops when zalloc_cpumask_var failed
scsi: target: iscsi: Fix np_ip_proto and np_sock_type in iscsit_setup_np
zhengbin (1):
scsi: core: Run queue when state is set to running after being blocked
and the diffstat:
.../devicetree/bindings/phy/phy-mtk-ufs.txt | 38 +
.../devicetree/bindings/ufs/cdns,ufshc.txt | 5 +-
.../devicetree/bindings/ufs/ufs-mediatek.txt | 43 +
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 2 -
MAINTAINERS | 7 +
drivers/message/fusion/mptbase.c | 2 +-
drivers/message/fusion/mptctl.c | 2 +-
drivers/message/fusion/mptsas.c | 36 +-
drivers/message/fusion/mptscsih.c | 4 +-
drivers/message/fusion/mptspi.c | 5 -
drivers/nvme/host/fc.c | 2 +-
drivers/phy/mediatek/Kconfig | 10 +
drivers/phy/mediatek/Makefile | 1 +
drivers/phy/mediatek/phy-mtk-ufs.c | 245 ++++
drivers/s390/scsi/zfcp_erp.c | 17 +
drivers/s390/scsi/zfcp_ext.h | 2 +
drivers/s390/scsi/zfcp_fc.c | 21 +-
drivers/s390/scsi/zfcp_scsi.c | 4 +
drivers/scsi/NCR5380.c | 11 +-
drivers/scsi/aacraid/aacraid.h | 7 +-
drivers/scsi/aacraid/commsup.c | 4 +-
drivers/scsi/aic7xxx/Kconfig.aic7xxx | 2 +-
drivers/scsi/aic7xxx/aic7xxx_core.c | 2 +-
drivers/scsi/atp870u.c | 7 +-
drivers/scsi/be2iscsi/be_cmds.c | 2 +-
drivers/scsi/bnx2fc/bnx2fc_io.c | 3 +-
drivers/scsi/csiostor/csio_isr.c | 28 +-
drivers/scsi/csiostor/csio_scsi.c | 5 +-
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 14 +-
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 2 +-
drivers/scsi/cxgbi/libcxgbi.c | 22 +-
drivers/scsi/dpt_i2o.c | 12 +-
drivers/scsi/gdth.c | 5 +-
drivers/scsi/hisi_sas/hisi_sas.h | 3 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 108 +-
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 21 +-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 49 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 473 +++---
drivers/scsi/hpsa.c | 27 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 39 +-
drivers/scsi/ibmvscsi/ibmvfc.h | 7 +-
drivers/scsi/ibmvscsi/ibmvscsi.c | 23 +-
drivers/scsi/libsas/sas_ata.c | 2 +-
drivers/scsi/libsas/sas_expander.c | 83 +-
drivers/scsi/libsas/sas_init.c | 42 +-
drivers/scsi/libsas/sas_phy.c | 7 +-
drivers/scsi/libsas/sas_port.c | 24 +-
drivers/scsi/lpfc/lpfc.h | 1 +
drivers/scsi/lpfc/lpfc_attr.c | 243 ++--
drivers/scsi/lpfc/lpfc_bsg.c | 123 +-
drivers/scsi/lpfc/lpfc_bsg.h | 4 +-
drivers/scsi/lpfc/lpfc_ct.c | 43 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 486 +++----
drivers/scsi/lpfc/lpfc_debugfs.h | 8 +-
drivers/scsi/lpfc/lpfc_els.c | 34 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 40 +-
drivers/scsi/lpfc/lpfc_hw.h | 4 +
drivers/scsi/lpfc/lpfc_hw4.h | 42 +-
drivers/scsi/lpfc/lpfc_init.c | 137 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 8 +-
drivers/scsi/lpfc/lpfc_nvme.c | 29 +-
drivers/scsi/lpfc/lpfc_nvmet.c | 64 +-
drivers/scsi/lpfc/lpfc_nvmet.h | 3 +-
drivers/scsi/lpfc/lpfc_scsi.c | 30 +-
drivers/scsi/lpfc/lpfc_sli.c | 350 ++---
drivers/scsi/lpfc/lpfc_sli.h | 19 +-
drivers/scsi/lpfc/lpfc_sli4.h | 54 +-
drivers/scsi/lpfc/lpfc_version.h | 4 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 4 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 2 +-
drivers/scsi/mpt3sas/Kconfig | 1 +
drivers/scsi/mpt3sas/mpt3sas_base.c | 184 ++-
drivers/scsi/mpt3sas/mpt3sas_base.h | 22 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 12 +
drivers/scsi/mvsas/mv_64xx.c | 3 +-
drivers/scsi/mvsas/mv_94xx.c | 3 +-
drivers/scsi/mvsas/mv_sas.c | 2 +-
drivers/scsi/mvumi.c | 6 +-
drivers/scsi/pm8001/pm8001_hwi.c | 37 +-
drivers/scsi/pm8001/pm8001_init.c | 4 +-
drivers/scsi/pm8001/pm8001_sas.c | 4 +-
drivers/scsi/pm8001/pm8001_sas.h | 2 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 55 +-
drivers/scsi/qedf/qedf.h | 57 +-
drivers/scsi/qedf/qedf_dbg.c | 32 +-
drivers/scsi/qedf/qedf_debugfs.c | 57 +-
drivers/scsi/qedf/qedf_els.c | 82 +-
drivers/scsi/qedf/qedf_fip.c | 95 +-
drivers/scsi/qedf/qedf_io.c | 753 +++++++---
drivers/scsi/qedf/qedf_main.c | 281 +++-
drivers/scsi/qedf/qedf_version.h | 6 +-
drivers/scsi/qedi/qedi_fw.c | 4 -
drivers/scsi/qedi/qedi_iscsi.c | 12 +-
drivers/scsi/qedi/qedi_main.c | 7 +-
drivers/scsi/qla2xxx/qla_attr.c | 329 +++--
drivers/scsi/qla2xxx/qla_bsg.c | 84 +-
drivers/scsi/qla2xxx/qla_bsg.h | 11 +
drivers/scsi/qla2xxx/qla_dbg.c | 192 ++-
drivers/scsi/qla2xxx/qla_dbg.h | 10 +-
drivers/scsi/qla2xxx/qla_def.h | 267 ++--
drivers/scsi/qla2xxx/qla_dfs.c | 9 +-
drivers/scsi/qla2xxx/qla_dsd.h | 30 +
drivers/scsi/qla2xxx/qla_fw.h | 98 +-
drivers/scsi/qla2xxx/qla_gbl.h | 107 +-
drivers/scsi/qla2xxx/qla_gs.c | 139 +-
drivers/scsi/qla2xxx/qla_init.c | 1505 ++++++++++++--------
drivers/scsi/qla2xxx/qla_inline.h | 69 +-
drivers/scsi/qla2xxx/qla_iocb.c | 360 ++---
drivers/scsi/qla2xxx/qla_isr.c | 144 +-
drivers/scsi/qla2xxx/qla_mbx.c | 336 +++--
drivers/scsi/qla2xxx/qla_mid.c | 9 +-
drivers/scsi/qla2xxx/qla_mr.c | 111 +-
drivers/scsi/qla2xxx/qla_mr.h | 11 +-
drivers/scsi/qla2xxx/qla_nvme.c | 115 +-
drivers/scsi/qla2xxx/qla_nvme.h | 14 +-
drivers/scsi/qla2xxx/qla_nx.c | 38 +-
drivers/scsi/qla2xxx/qla_nx.h | 2 +-
drivers/scsi/qla2xxx/qla_nx2.c | 13 +-
drivers/scsi/qla2xxx/qla_os.c | 609 ++++----
drivers/scsi/qla2xxx/qla_sup.c | 973 +++++++++----
drivers/scsi/qla2xxx/qla_target.c | 201 +--
drivers/scsi/qla2xxx/qla_target.h | 33 +-
drivers/scsi/qla2xxx/qla_tmpl.c | 447 +++---
drivers/scsi/qla2xxx/qla_tmpl.h | 76 +-
drivers/scsi/qla2xxx/qla_version.h | 4 +-
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 58 +-
drivers/scsi/qla4xxx/ql4_os.c | 4 +-
drivers/scsi/qlogicfas408.c | 4 +-
drivers/scsi/scsi_devinfo.c | 1 +
drivers/scsi/scsi_dh.c | 1 +
drivers/scsi/scsi_error.c | 1 -
drivers/scsi/scsi_lib.c | 45 +-
drivers/scsi/scsi_scan.c | 7 +-
drivers/scsi/scsi_sysfs.c | 6 +
drivers/scsi/scsi_transport_fc.c | 119 +-
drivers/scsi/scsi_transport_iscsi.c | 2 +
drivers/scsi/sd.c | 22 +-
drivers/scsi/smartpqi/Makefile | 1 +
drivers/scsi/smartpqi/smartpqi.h | 15 +-
drivers/scsi/smartpqi/smartpqi_init.c | 51 +-
drivers/scsi/smartpqi/smartpqi_sas_transport.c | 15 +-
drivers/scsi/smartpqi/smartpqi_sis.c | 15 +-
drivers/scsi/smartpqi/smartpqi_sis.h | 15 +-
drivers/scsi/storvsc_drv.c | 15 +-
drivers/scsi/ufs/Kconfig | 14 +
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/cdns-pltfrm.c | 74 +-
drivers/scsi/ufs/ufs-hisi.c | 113 +-
drivers/scsi/ufs/ufs-mediatek.c | 368 +++++
drivers/scsi/ufs/ufs-mediatek.h | 53 +
drivers/scsi/ufs/ufs-qcom.c | 106 +-
drivers/scsi/ufs/ufs.h | 1 -
drivers/scsi/ufs/ufshcd-pltfrm.c | 112 +-
drivers/scsi/ufs/ufshcd-pltfrm.h | 21 +
drivers/scsi/ufs/ufshcd.c | 41 +-
drivers/scsi/ufs/unipro.h | 2 +-
drivers/scsi/virtio_scsi.c | 2 +-
drivers/target/iscsi/iscsi_target.c | 118 +-
drivers/target/iscsi/iscsi_target_login.c | 9 +-
drivers/target/iscsi/iscsi_target_util.c | 5 +
drivers/target/target_core_alua.c | 6 +-
drivers/target/target_core_configfs.c | 163 ++-
drivers/target/target_core_device.c | 4 +-
drivers/target/target_core_pr.c | 33 +-
drivers/target/target_core_pr.h | 1 +
drivers/target/target_core_tmr.c | 2 +-
drivers/target/target_core_xcopy.c | 92 +-
include/linux/nvme-fc-driver.h | 6 -
include/scsi/libsas.h | 13 +-
include/scsi/osd_attributes.h | 398 ------
include/scsi/osd_protocol.h | 676 ---------
include/scsi/osd_sec.h | 45 -
include/scsi/osd_sense.h | 263 ----
include/scsi/osd_types.h | 45 -
include/scsi/scsi_host.h | 6 +-
include/scsi/scsi_transport_fc.h | 18 +-
include/target/iscsi/iscsi_target_core.h | 1 +
include/target/target_core_base.h | 4 +-
include/target/target_core_fabric.h | 1 +
include/uapi/scsi/fc/fc_els.h | 33 +
180 files changed, 8037 insertions(+), 6489 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt
create mode 100644 Documentation/devicetree/bindings/ufs/ufs-mediatek.txt
create mode 100644 drivers/phy/mediatek/phy-mtk-ufs.c
create mode 100644 drivers/scsi/qla2xxx/qla_dsd.h
create mode 100644 drivers/scsi/ufs/ufs-mediatek.c
create mode 100644 drivers/scsi/ufs/ufs-mediatek.h
delete mode 100644 include/scsi/osd_attributes.h
delete mode 100644 include/scsi/osd_protocol.h
delete mode 100644 include/scsi/osd_sec.h
delete mode 100644 include/scsi/osd_sense.h
delete mode 100644 include/scsi/osd_types.h
James
Powered by blists - more mailing lists