linux-kernel - [v1 4/4] arm64: ls1028ardb: Add support DP nodes for LS1028ARDB

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190508103703.40885-4-wen.he_1@nxp.com>
Date:   Wed, 8 May 2019 10:35:33 +0000
From:   Wen He <wen.he_1@....com>
To:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "shawnguo@...nel.org" <shawnguo@...nel.org>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>
CC:     Leo Li <leoyang.li@....com>, Wen He <wen.he_1@....com>
Subject: [v1 4/4] arm64: ls1028ardb: Add support DP nodes for LS1028ARDB

This patch add HDP PHY Controller related nodes on the LS1028ARDB.
Now LS1028ARDB on DP has following features:
- Supports 4 dp lane channel and lane mapping is 1-0-3-2.
- By default, the pixel link rate value's 27Mhz.
- By default, support the resoluions are 4k@60,1080p@60,720p@60,
480p@60. also user can specify any combination of monitor supported
resoluions by written in the node 'resoluion'.
- By default, the edid function is not in use.

Signed-off-by: Alison Wang <alison.wang@....com>
Signed-off-by: Wen He <wen.he_1@....com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index f9c272fb0738..513b0e37ea13 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -151,3 +151,15 @@
 &sai4 {
 	status = "okay";
 };
+
+&hdp {
+	fsl,no_edid;
+	resolution = "3840x2160@60",
+		   "1920x1080@60",
+		   "1280x720@60",
+		   "720x480@60";
+	lane_mapping = <0x4e>;
+	edp_link_rate = <0x6>;
+	edp_num_lanes = <0x4>;
+	status = "okay";
+};
-- 
2.17.1