| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHp75Vf9uPG7_K0P26nHYCH0WB6LFX3wk8aJBpLWQ-r46kDw9w@mail.gmail.com>
Date: Wed, 8 May 2019 17:02:03 +0300
From: Andy Shevchenko <andy.shevchenko@...il.com>
To: Yurii Pavlovskyi <yurii.pavlovskyi@...il.com>,
Jacek Anaszewski <jacek.anaszewski@...il.com>,
Linux LED Subsystem <linux-leds@...r.kernel.org>
Cc: Corentin Chary <corentin.chary@...il.com>,
Darren Hart <dvhart@...radead.org>,
Andy Shevchenko <andy@...radead.org>,
Daniel Drake <drake@...lessm.com>,
acpi4asus-user <acpi4asus-user@...ts.sourceforge.net>,
Platform Driver <platform-driver-x86@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-api@...r.kernel.org
Subject: Re: [PATCH v3 09/11] platform/x86: asus-wmi: Control RGB keyboard backlight
On Fri, Apr 19, 2019 at 1:14 PM Yurii Pavlovskyi
<yurii.pavlovskyi@...il.com> wrote:
>
> The WMI exposes two methods for controlling RGB keyboard backlight, which
> allows controlling:
> * RGB components in range 00 - ff,
> * Switch between 4 effects,
> * Switch between 3 effect speed modes,
> * Separately enable the backlight on boot, in the awake state (after driver
> load), in sleep mode, and probably in something called shutdown mode (no
> observable effects of enabling it are known so far).
>
> The configuration should be written to several sysfs parameter buffers
> which are then written via WMI by writing either 1 or 2 to the "kbbl_set"
> parameter. When reading the buffers the last written value is returned.
>
> If the 2 is written to "kbbl_set", the parameters will be reset on reboot
> (temporary mode), 1 is permanent mode, parameters are retained.
>
> The calls use new 3-dword input buffer method call.
>
> The functionality is only enabled if corresponding DSTS methods return
> exact valid values.
>
> The following script demonstrates usage:
>
> echo Red [00 - ff]
> echo 33 > /sys/devices/platform/asus-nb-wmi/kbbl/kbbl_red
> echo Green [00 - ff]
> echo ff > /sys/devices/platform/asus-nb-wmi/kbbl/kbbl_green
> echo Blue [00 - ff]
> echo 0 > /sys/devices/platform/asus-nb-wmi/kbbl/kbbl_blue
> echo Mode: 0 - static color, 1 - breathing, 2 - color cycle, 3 - strobing
> echo 0 > /sys/devices/platform/asus-nb-wmi/kbbl/kbbl_mode
> echo Speed for modes 1 and 2: 0 - slow, 1 - medium, 2 - fast
> echo 0 > /sys/devices/platform/asus-nb-wmi/kbbl/kbbl_speed
> echo Enable: 02 - on boot, before module load, 08 - awake, 20 - sleep,
> echo 2a or ff to set all
> echo 2a > /sys/devices/platform/asus-nb-wmi/kbbl/kbbl_flags
> echo Save: 1 - permanently, 2 - temporarily, reset after reboot
> echo 1 > /sys/devices/platform/asus-nb-wmi/kbbl/kbbl_set
>
Shouldn't be the LED subsystem driver for this?
> Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@...il.com>
> ---
> .../ABI/testing/sysfs-platform-asus-wmi | 61 ++++
> drivers/platform/x86/asus-wmi.c | 331 ++++++++++++++++++
> include/linux/platform_data/x86/asus-wmi.h | 2 +
> 3 files changed, 394 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi
> index 019e1e29370e..1cc54d5e3e10 100644
> --- a/Documentation/ABI/testing/sysfs-platform-asus-wmi
> +++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi
> @@ -36,3 +36,64 @@ KernelVersion: 3.5
> Contact: "AceLan Kao" <acelan.kao@...onical.com>
> Description:
> Resume on lid open. 1 means on, 0 means off.
> +
> +What: /sys/devices/platform/<platform>/kbbl/kbbl_red
> +Date: Apr 2019
> +KernelVersion: 5.1
> +Contact: "Yurii Pavlovskyi" <yurii.pavlovskyi@...il.com>
> +Description:
> + RGB keyboard backlight red component: 00 .. ff.
> +
> +What: /sys/devices/platform/<platform>/kbbl/kbbl_green
> +Date: Apr 2019
> +KernelVersion: 5.1
> +Contact: "Yurii Pavlovskyi" <yurii.pavlovskyi@...il.com>
> +Description:
> + RGB keyboard backlight green component: 00 .. ff.
> +
> +What: /sys/devices/platform/<platform>/kbbl/kbbl_blue
> +Date: Apr 2019
> +KernelVersion: 5.1
> +Contact: "Yurii Pavlovskyi" <yurii.pavlovskyi@...il.com>
> +Description:
> + RGB keyboard backlight blue component: 00 .. ff.
> +
> +What: /sys/devices/platform/<platform>/kbbl/kbbl_mode
> +Date: Apr 2019
> +KernelVersion: 5.1
> +Contact: "Yurii Pavlovskyi" <yurii.pavlovskyi@...il.com>
> +Description:
> + RGB keyboard backlight mode:
> + * 0 - static color,
> + * 1 - breathing,
> + * 2 - color cycle,
> + * 3 - strobing.
> +
> +What: /sys/devices/platform/<platform>/kbbl/kbbl_speed
> +Date: Apr 2019
> +KernelVersion: 5.1
> +Contact: "Yurii Pavlovskyi" <yurii.pavlovskyi@...il.com>
> +Description:
> + RGB keyboard backlight speed for modes 1 and 2:
> + * 0 - slow,
> + * 1 - medium,
> + * 2 - fast.
> +
> +What: /sys/devices/platform/<platform>/kbbl/kbbl_flags
> +Date: Apr 2019
> +KernelVersion: 5.1
> +Contact: "Yurii Pavlovskyi" <yurii.pavlovskyi@...il.com>
> +Description:
> + RGB keyboard backlight enable flags (2a to enable everything), OR of:
> + * 02 - on boot (until module load),
> + * 08 - awake,
> + * 20 - sleep.
> +
> +What: /sys/devices/platform/<platform>/kbbl/kbbl_set
> +Date: Apr 2019
> +KernelVersion: 5.1
> +Contact: "Yurii Pavlovskyi" <yurii.pavlovskyi@...il.com>
> +Description:
> + Write changed RGB keyboard backlight parameters:
> + * 1 - permanently,
> + * 2 - temporarily.
> diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
> index 1b8272374660..0a32079336d8 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -148,6 +148,21 @@ struct asus_rfkill {
> u32 dev_id;
> };
>
> +struct asus_kbbl_rgb {
> + u8 kbbl_red;
> + u8 kbbl_green;
> + u8 kbbl_blue;
> + u8 kbbl_mode;
> + u8 kbbl_speed;
> +
> + u8 kbbl_set_red;
> + u8 kbbl_set_green;
> + u8 kbbl_set_blue;
> + u8 kbbl_set_mode;
> + u8 kbbl_set_speed;
> + u8 kbbl_set_flags;
> +};
> +
> struct asus_wmi {
> int dsts_id;
> int spec;
> @@ -183,6 +198,9 @@ struct asus_wmi {
> int asus_hwmon_num_fans;
> int asus_hwmon_pwm;
>
> + bool kbbl_rgb_available;
> + struct asus_kbbl_rgb kbbl_rgb;
> +
> struct hotplug_slot hotplug_slot;
> struct mutex hotplug_lock;
> struct mutex wmi_lock;
> @@ -658,6 +676,312 @@ static int asus_wmi_led_init(struct asus_wmi *asus)
> return rv;
> }
>
> +/* RGB keyboard backlight *****************************************************/
> +
> +static ssize_t show_u8(u8 value, char *buf)
> +{
> + return scnprintf(buf, PAGE_SIZE, "%02x\n", value);
> +}
> +
> +static ssize_t store_u8(u8 *value, const char *buf, int count)
> +{
> + int err;
> + u8 result;
> +
> + err = kstrtou8(buf, 16, &result);
> + if (err < 0) {
> + pr_warn("Trying to store invalid value\n");
> + return err;
> + }
> +
> + *value = result;
> +
> + return count;
> +}
> +
> +static ssize_t kbbl_red_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + return show_u8(asus->kbbl_rgb.kbbl_red, buf);
> +}
> +
> +static ssize_t kbbl_red_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + return store_u8(&asus->kbbl_rgb.kbbl_set_red, buf, count);
> +}
> +
> +static ssize_t kbbl_green_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + return show_u8(asus->kbbl_rgb.kbbl_green, buf);
> +}
> +
> +static ssize_t kbbl_green_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t count)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + return store_u8(&asus->kbbl_rgb.kbbl_set_green, buf, count);
> +}
> +
> +static ssize_t kbbl_blue_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + return show_u8(asus->kbbl_rgb.kbbl_blue, buf);
> +}
> +
> +static ssize_t kbbl_blue_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t count)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + return store_u8(&asus->kbbl_rgb.kbbl_set_blue, buf, count);
> +}
> +
> +static ssize_t kbbl_mode_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + return show_u8(asus->kbbl_rgb.kbbl_mode, buf);
> +}
> +
> +static ssize_t kbbl_mode_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t count)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + return store_u8(&asus->kbbl_rgb.kbbl_set_mode, buf, count);
> +}
> +
> +static ssize_t kbbl_speed_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + return show_u8(asus->kbbl_rgb.kbbl_speed, buf);
> +}
> +
> +static ssize_t kbbl_speed_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t count)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + return store_u8(&asus->kbbl_rgb.kbbl_set_speed, buf, count);
> +}
> +
> +static ssize_t kbbl_flags_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + return show_u8(asus->kbbl_rgb.kbbl_set_flags, buf);
> +}
> +
> +static ssize_t kbbl_flags_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t count)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + return store_u8(&asus->kbbl_rgb.kbbl_set_flags, buf, count);
> +}
> +
> +static ssize_t kbbl_set_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return scnprintf(buf, PAGE_SIZE,
> + "Write to configure RGB keyboard backlight\n");
> +}
> +
> +static int kbbl_rgb_write(struct asus_wmi *asus, int persistent)
> +{
> + int err;
> + u32 retval;
> + u8 speed_byte;
> + u8 mode_byte;
> + u8 speed;
> + u8 mode;
> +
> + speed = asus->kbbl_rgb.kbbl_set_speed;
> + switch (speed) {
> + case 0:
> + default:
> + speed_byte = 0xe1; // slow
> + speed = 0;
> + break;
> + case 1:
> + speed_byte = 0xeb; // medium
> + break;
> + case 2:
> + speed_byte = 0xf5; // fast
> + break;
> + }
> +
> + mode = asus->kbbl_rgb.kbbl_set_mode;
> + switch (mode) {
> + case 0:
> + default:
> + mode_byte = 0x00; // static color
> + mode = 0;
> + break;
> + case 1:
> + mode_byte = 0x01; // breathing
> + break;
> + case 2:
> + mode_byte = 0x02; // color cycle
> + break;
> + case 3:
> + mode_byte = 0x0a; // strobing
> + break;
> + }
> +
> + err = asus_wmi_evaluate_method_3dw(ASUS_WMI_METHODID_DEVS,
> + ASUS_WMI_DEVID_KBD_RGB,
> + (persistent ? 0xb4 : 0xb3) |
> + (mode_byte << 8) |
> + (asus->kbbl_rgb.kbbl_set_red << 16) |
> + (asus->kbbl_rgb.kbbl_set_green << 24),
> + (asus->kbbl_rgb.kbbl_set_blue) |
> + (speed_byte << 8), &retval);
> + if (err) {
> + pr_warn("RGB keyboard device 1, write error: %d\n", err);
> + return err;
> + }
> +
> + if (retval != 1) {
> + pr_warn("RGB keyboard device 1, write error (retval): %x\n",
> + retval);
> + return -EIO;
> + }
> +
> + err = asus_wmi_evaluate_method_3dw(ASUS_WMI_METHODID_DEVS,
> + ASUS_WMI_DEVID_KBD_RGB2,
> + (0xbd) |
> + (asus->kbbl_rgb.kbbl_set_flags << 16) |
> + (persistent ? 0x0100 : 0x0000), 0, &retval);
> + if (err) {
> + pr_warn("RGB keyboard device 2, write error: %d\n", err);
> + return err;
> + }
> +
> + if (retval != 1) {
> + pr_warn("RGB keyboard device 2, write error (retval): %x\n",
> + retval);
> + return -EIO;
> + }
> +
> + asus->kbbl_rgb.kbbl_red = asus->kbbl_rgb.kbbl_set_red;
> + asus->kbbl_rgb.kbbl_green = asus->kbbl_rgb.kbbl_set_green;
> + asus->kbbl_rgb.kbbl_blue = asus->kbbl_rgb.kbbl_set_blue;
> + asus->kbbl_rgb.kbbl_mode = mode;
> + asus->kbbl_rgb.kbbl_speed = speed;
> +
> + return 0;
> +}
> +
> +static ssize_t kbbl_set_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t count)
> +{
> + u8 value;
> + struct asus_wmi *asus;
> + int result;
> +
> + asus = dev_get_drvdata(dev);
> + result = store_u8(&value, buf, count);
> + if (result < 0)
> + return result;
> +
> + if (value == 1)
> + kbbl_rgb_write(asus, 1);
> + else if (value == 2)
> + kbbl_rgb_write(asus, 0);
> +
> + return count;
> +}
> +
> +/* RGB values: 00 .. ff */
> +static DEVICE_ATTR_RW(kbbl_red);
> +static DEVICE_ATTR_RW(kbbl_green);
> +static DEVICE_ATTR_RW(kbbl_blue);
> +
> +/*
> + * Color modes: 0 - static color, 1 - breathing, 2 - color cycle, 3 - strobing
> + */
> +static DEVICE_ATTR_RW(kbbl_mode);
> +
> +/* Speed for modes 1 and 2: 0 - slow, 1 - medium, 2 - fast */
> +static DEVICE_ATTR_RW(kbbl_speed);
> +
> +/*
> + * Enable: 02 - on boot (until module load) | 08 - awake | 20 - sleep
> + * (2a or ff to enable everything)
> + *
> + * Logically 80 would be shutdown, but no visible effects of this option
> + * were observed so far
> + */
> +static DEVICE_ATTR_RW(kbbl_flags);
> +
> +/* Write data: 1 - permanently, 2 - temporarily (reset after reboot) */
> +static DEVICE_ATTR_RW(kbbl_set);
> +
> +static struct attribute *rgbkb_sysfs_attributes[] = {
> + &dev_attr_kbbl_red.attr,
> + &dev_attr_kbbl_green.attr,
> + &dev_attr_kbbl_blue.attr,
> + &dev_attr_kbbl_mode.attr,
> + &dev_attr_kbbl_speed.attr,
> + &dev_attr_kbbl_flags.attr,
> + &dev_attr_kbbl_set.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group kbbl_attribute_group = {
> + .name = "kbbl",
> + .attrs = rgbkb_sysfs_attributes
> +};
> +
> +static int kbbl_rgb_init(struct asus_wmi *asus)
> +{
> + int err;
> +
> + err = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_KBD_RGB);
> + if (err) {
> + if (err == -ENODEV)
> + return 0;
> + else
> + return err;
> + }
> +
> + err = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_KBD_RGB2);
> + if (err) {
> + if (err == -ENODEV)
> + return 0;
> + else
> + return err;
> + }
> +
> + asus->kbbl_rgb_available = true;
> + return sysfs_create_group(&asus->platform_device->dev.kobj,
> + &kbbl_attribute_group);
> +}
> +
> +static void kbbl_rgb_exit(struct asus_wmi *asus)
> +{
> + if (asus->kbbl_rgb_available) {
> + sysfs_remove_group(&asus->platform_device->dev.kobj,
> + &kbbl_attribute_group);
> + }
> +}
> +
> /* RF *************************************************************************/
>
> /*
> @@ -2230,6 +2554,10 @@ static int asus_wmi_add(struct platform_device *pdev)
> if (err)
> goto fail_leds;
>
> + err = kbbl_rgb_init(asus);
> + if (err)
> + goto fail_rgbkb;
> +
> asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_WLAN, &result);
> if (result & (ASUS_WMI_DSTS_PRESENCE_BIT | ASUS_WMI_DSTS_USER_BIT))
> asus->driver->wlan_ctrl_by_user = 1;
> @@ -2287,6 +2615,8 @@ static int asus_wmi_add(struct platform_device *pdev)
> fail_backlight:
> asus_wmi_rfkill_exit(asus);
> fail_rfkill:
> + kbbl_rgb_exit(asus);
> +fail_rgbkb:
> asus_wmi_led_exit(asus);
> fail_leds:
> fail_hwmon:
> @@ -2307,6 +2637,7 @@ static int asus_wmi_remove(struct platform_device *device)
> asus_wmi_backlight_exit(asus);
> asus_wmi_input_exit(asus);
> asus_wmi_led_exit(asus);
> + kbbl_rgb_exit(asus);
> asus_wmi_rfkill_exit(asus);
> asus_wmi_debugfs_exit(asus);
> asus_wmi_platform_exit(asus);
> diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
> index a5fe7e68944b..c8c6e939e196 100644
> --- a/include/linux/platform_data/x86/asus-wmi.h
> +++ b/include/linux/platform_data/x86/asus-wmi.h
> @@ -57,6 +57,8 @@
> #define ASUS_WMI_DEVID_KBD_BACKLIGHT 0x00050021
> #define ASUS_WMI_DEVID_LIGHT_SENSOR 0x00050022 /* ?? */
> #define ASUS_WMI_DEVID_LIGHTBAR 0x00050025
> +#define ASUS_WMI_DEVID_KBD_RGB 0x00100056
> +#define ASUS_WMI_DEVID_KBD_RGB2 0x00100057
>
> /* Misc */
> #define ASUS_WMI_DEVID_CAMERA 0x00060013
> --
> 2.17.1
>
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists