[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1557392336-28239-1-git-send-email-amelie.delaunay@st.com>
Date: Thu, 9 May 2019 10:58:47 +0200
From: Amelie Delaunay <amelie.delaunay@...com>
To: Lee Jones <lee.jones@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Alexandre Torgue <alexandre.torgue@...com>,
"Maxime Coquelin" <mcoquelin.stm32@...il.com>
CC: <linux-gpio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Amelie Delaunay <amelie.delaunay@...com>
Subject: [PATCH v6 0/9] Introduce STMFX I2C Multi-Function eXpander
This series adds support for STMicroelectronics Multi-Function eXpander
(STMFX), used on some STM32 discovery and evaluation boards.
STMFX is an STM32L152 slave controller whose firmware embeds the following
features:
- I/O expander (16 GPIOs + 8 extra if the other features are not enabled),
- resistive touchscreen controller,
- IDD measurement.
I2C stuff and chip initialization is based on an MFD parent driver, which
registers STMFX features MFD children.
---
Changes in v6:
- mfd: go with Lee's suggestion about vdd regulator management (but
initialize ret with PTR_ERR_OR_ZERO to use it in if/else if and error log),
also remove backup/restore helpers and move the code in suspend/
resume
Changes in v5:
- mfd: fix Lee's comments (reorder struct declaration, drop mfd cells
platform data initialization, typos)
- pinctrl: get stmfx struct through dev_get_drvdata(pdev->dev.parent)
instead of dev_get_platdata(&pdev->dev);
Changes in v4:
- mfd: move registers #define into the header
- mfd: merge stmfx and stmfx_ddata structures into one stmfx structure
- mfd: change stmfx_chip_init/exit and stmfx_irq_init/exit args: use
i2c_client struct and i2c_get_clientdata
- mfd: fix typos
- mfd: add MFD cells for IDD and TS features
- pinctrl: rework registers #define
- dts: add STMFX support on stm32mp157c-ev1
Changes in v3:
- fix MFD interrupt bindings
- fix drivers/mfd/stmfx.c:103:8: warning: 'mask' may be used uninitialized
in this function
Changes in v2:
- move to MFD parent driver for i2c stuff and chip initialization
- improve regmap configuration
- take advantage of the use of gpio-ranges
Amelie Delaunay (9):
dt-bindings: mfd: Add ST Multi-Function eXpander (STMFX) core bindings
mfd: Add ST Multi-Function eXpander (STMFX) core driver
dt-bindings: pinctrl: document the STMFX pinctrl bindings
pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver
ARM: dts: stm32: add STMFX support on stm32746g-eval
ARM: dts: stm32: add joystick support on stm32746g-eval
ARM: dts: stm32: add orange and blue leds on stm32746g-eval
ARM: dts: stm32: add STMFX support on stm32mp157c-ev1
ARM: dts: stm32: add joystick support on stm32mp157c-ev1
Documentation/devicetree/bindings/mfd/stmfx.txt | 28 +
.../devicetree/bindings/pinctrl/pinctrl-stmfx.txt | 116 +++
arch/arm/boot/dts/stm32746g-eval.dts | 66 ++
arch/arm/boot/dts/stm32mp157c-ev1.dts | 60 ++
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 2 +-
drivers/mfd/stmfx.c | 545 ++++++++++++++
drivers/pinctrl/Kconfig | 12 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-stmfx.c | 820 +++++++++++++++++++++
include/linux/mfd/stmfx.h | 123 ++++
11 files changed, 1785 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mfd/stmfx.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt
create mode 100644 drivers/mfd/stmfx.c
create mode 100644 drivers/pinctrl/pinctrl-stmfx.c
create mode 100644 include/linux/mfd/stmfx.h
--
2.7.4
Powered by blists - more mailing lists