| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190509111849.22927-1-marcos.souza.org@gmail.com>
Date: Thu, 9 May 2019 08:18:49 -0300
From: Marcos Paulo de Souza <marcos.souza.org@...il.com>
To: linux-kernel@...r.kernel.org
Cc: neilb@...e.com, Marcos Paulo de Souza <marcos.souza.org@...il.com>,
Shaohua Li <shli@...nel.org>,
linux-raid@...r.kernel.org (open list:SOFTWARE RAID (Multiple Disks)
SUPPORT)
Subject: [PATCH] drivers: md: Unify common definitions of raid1 and raid10
These definitions are being moved to raid1-10.c.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@...il.com>
---
drivers/md/raid1-10.c | 25 +++++++++++++++++++++++++
drivers/md/raid1.c | 29 ++---------------------------
drivers/md/raid10.c | 27 +--------------------------
3 files changed, 28 insertions(+), 53 deletions(-)
diff --git a/drivers/md/raid1-10.c b/drivers/md/raid1-10.c
index 400001b815db..7d968bf08e54 100644
--- a/drivers/md/raid1-10.c
+++ b/drivers/md/raid1-10.c
@@ -3,6 +3,31 @@
#define RESYNC_BLOCK_SIZE (64*1024)
#define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
+/*
+ * Number of guaranteed raid bios in case of extreme VM load:
+ */
+#define NR_RAID_BIOS 256
+
+/* when we get a read error on a read-only array, we redirect to another
+ * device without failing the first device, or trying to over-write to
+ * correct the read error. To keep track of bad blocks on a per-bio
+ * level, we store IO_BLOCKED in the appropriate 'bios' pointer
+ */
+#define IO_BLOCKED ((struct bio *)1)
+/* When we successfully write to a known bad-block, we need to remove the
+ * bad-block marking which must be done from process context. So we record
+ * the success by setting devs[n].bio to IO_MADE_GOOD
+ */
+#define IO_MADE_GOOD ((struct bio *)2)
+
+#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
+
+/* When there are this many requests queue to be written by
+ * the raid thread, we become 'congested' to provide back-pressure
+ * for writeback.
+ */
+static int max_queued_requests = 1024;
+
/* for managing resync I/O pages */
struct resync_pages {
void *raid_bio;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 0c8a098d220e..bb052c35bf29 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -50,31 +50,6 @@
(1L << MD_HAS_PPL) | \
(1L << MD_HAS_MULTIPLE_PPLS))
-/*
- * Number of guaranteed r1bios in case of extreme VM load:
- */
-#define NR_RAID1_BIOS 256
-
-/* when we get a read error on a read-only array, we redirect to another
- * device without failing the first device, or trying to over-write to
- * correct the read error. To keep track of bad blocks on a per-bio
- * level, we store IO_BLOCKED in the appropriate 'bios' pointer
- */
-#define IO_BLOCKED ((struct bio *)1)
-/* When we successfully write to a known bad-block, we need to remove the
- * bad-block marking which must be done from process context. So we record
- * the success by setting devs[n].bio to IO_MADE_GOOD
- */
-#define IO_MADE_GOOD ((struct bio *)2)
-
-#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
-
-/* When there are this many requests queue to be written by
- * the raid1 thread, we become 'congested' to provide back-pressure
- * for writeback.
- */
-static int max_queued_requests = 1024;
-
static void allow_barrier(struct r1conf *conf, sector_t sector_nr);
static void lower_barrier(struct r1conf *conf, sector_t sector_nr);
@@ -2955,7 +2930,7 @@ static struct r1conf *setup_conf(struct mddev *mddev)
if (!conf->poolinfo)
goto abort;
conf->poolinfo->raid_disks = mddev->raid_disks * 2;
- err = mempool_init(&conf->r1bio_pool, NR_RAID1_BIOS, r1bio_pool_alloc,
+ err = mempool_init(&conf->r1bio_pool, NR_RAID_BIOS, r1bio_pool_alloc,
r1bio_pool_free, conf->poolinfo);
if (err)
goto abort;
@@ -3240,7 +3215,7 @@ static int raid1_reshape(struct mddev *mddev)
newpoolinfo->mddev = mddev;
newpoolinfo->raid_disks = raid_disks * 2;
- ret = mempool_init(&newpool, NR_RAID1_BIOS, r1bio_pool_alloc,
+ ret = mempool_init(&newpool, NR_RAID_BIOS, r1bio_pool_alloc,
r1bio_pool_free, newpoolinfo);
if (ret) {
kfree(newpoolinfo);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 3b6880dd648d..24cb116d950f 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -73,31 +73,6 @@
* [B A] [D C] [B A] [E C D]
*/
-/*
- * Number of guaranteed r10bios in case of extreme VM load:
- */
-#define NR_RAID10_BIOS 256
-
-/* when we get a read error on a read-only array, we redirect to another
- * device without failing the first device, or trying to over-write to
- * correct the read error. To keep track of bad blocks on a per-bio
- * level, we store IO_BLOCKED in the appropriate 'bios' pointer
- */
-#define IO_BLOCKED ((struct bio *)1)
-/* When we successfully write to a known bad-block, we need to remove the
- * bad-block marking which must be done from process context. So we record
- * the success by setting devs[n].bio to IO_MADE_GOOD
- */
-#define IO_MADE_GOOD ((struct bio *)2)
-
-#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
-
-/* When there are this many requests queued to be written by
- * the raid10 thread, we become 'congested' to provide back-pressure
- * for writeback.
- */
-static int max_queued_requests = 1024;
-
static void allow_barrier(struct r10conf *conf);
static void lower_barrier(struct r10conf *conf);
static int _enough(struct r10conf *conf, int previous, int ignore);
@@ -3684,7 +3659,7 @@ static struct r10conf *setup_conf(struct mddev *mddev)
conf->geo = geo;
conf->copies = copies;
- err = mempool_init(&conf->r10bio_pool, NR_RAID10_BIOS, r10bio_pool_alloc,
+ err = mempool_init(&conf->r10bio_pool, NR_RAID_BIOS, r10bio_pool_alloc,
r10bio_pool_free, conf);
if (err)
goto out;
--
2.21.0
Powered by blists - more mailing lists