linux-kernel - [PATCH 01/10] PCI/AER: Replace dev_printk(KERN_DEBUG) with dev

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190509141456.223614-2-helgaas@kernel.org>
Date:   Thu,  9 May 2019 09:14:47 -0500
From:   Bjorn Helgaas <helgaas@...nel.org>
To:     Frederick Lawler <fred@...dlawl.com>
Cc:     Mika Westerberg <mika.westerberg@...ux.intel.com>,
        Lukas Wunner <lukas@...ner.de>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Keith Busch <keith.busch@...el.com>,
        Dongdong Liu <liudongdong3@...wei.com>,
        Sven Van Asbroeck <thesven73@...il.com>,
        linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
        Bjorn Helgaas <bhelgaas@...gle.com>
Subject: [PATCH 01/10] PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()

From: Frederick Lawler <fred@...dlawl.com>

Replace dev_printk(KERN_DEBUG) with dev_info() or dev_err() to be more
consistent with other logging.

These could be converted to dev_dbg(), but that depends on
CONFIG_DYNAMIC_DEBUG and DEBUG, and we want most of these messages to
*always* be in the dmesg log.

Also remove a redundant kzalloc() failure message.

Link: https://lore.kernel.org/lkml/20190503035946.23608-2-fred@fredlawl.com
Signed-off-by: Frederick Lawler <fred@...dlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
---
 drivers/pci/pcie/aer.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index f8fc2114ad39..74f872e4e0cc 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -964,8 +964,8 @@ static bool find_source_device(struct pci_dev *parent,
 	pci_walk_bus(parent->subordinate, find_device_iter, e_info);
 
 	if (!e_info->error_dev_num) {
-		pci_printk(KERN_DEBUG, parent, "can't find device of ID%04x\n",
-			   e_info->id);
+		pci_info(parent, "can't find device of ID%04x\n",
+			 e_info->id);
 		return false;
 	}
 	return true;
@@ -1379,18 +1379,17 @@ static int aer_probe(struct pcie_device *dev)
 	struct device *device = &dev->device;
 
 	rpc = devm_kzalloc(device, sizeof(struct aer_rpc), GFP_KERNEL);
-	if (!rpc) {
-		dev_printk(KERN_DEBUG, device, "alloc AER rpc failed\n");
+	if (!rpc)
 		return -ENOMEM;
-	}
+
 	rpc->rpd = dev->port;
 	set_service_data(dev, rpc);
 
 	status = devm_request_threaded_irq(device, dev->irq, aer_irq, aer_isr,
 					   IRQF_SHARED, "aerdrv", dev);
 	if (status) {
-		dev_printk(KERN_DEBUG, device, "request AER IRQ %d failed\n",
-			   dev->irq);
+		dev_err(device, "request AER IRQ %d failed\n",
+			dev->irq);
 		return status;
 	}
 
@@ -1419,7 +1418,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 	pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, reg32);
 
 	rc = pci_bus_error_reset(dev);
-	pci_printk(KERN_DEBUG, dev, "Root Port link has been reset\n");
+	pci_info(dev, "Root Port link has been reset\n");
 
 	/* Clear Root Error Status */
 	pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &reg32);
-- 
2.21.0.1020.gf2820cf01a-goog