[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190509020352.14282-1-masneyb@onstation.org>
Date: Wed, 8 May 2019 22:03:46 -0400
From: Brian Masney <masneyb@...tation.org>
To: robdclark@...il.com, sean@...rly.run,
dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
freedreno@...ts.freedesktop.org, airlied@...ux.ie, daniel@...ll.ch,
linux-kernel@...r.kernel.org, linus.walleij@...aro.org,
jonathan@...ek.ca, robh@...nel.org
Subject: [PATCH RFC v2 0/6] ARM: qcom: initial Nexus 5 display support
Here is a patch series that adds initial display support for the LG
Nexus 5 (hammerhead) phone. It's not fully working so that's why some
of these patches are RFC until we can get it fully working.
The phones boots into terminal mode, however there is a several second
(or more) delay when writing to tty1 compared to when the changes are
actually shown on the screen. The following errors are in dmesg:
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:49:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:32:plane-0] flip_done timed out
WARNING: CPU: 0 PID: 5 at drivers/gpu/drm/drm_atomic_helper.c:1430 drm_atomic_helper_wait_for_vblanks.part.1+0x288/0x290
[CRTC:49:crtc-0] vblank wait timed out
Modules linked in:
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.1.0-rc6-next-20190426-00006-g35c0d32a96e1-dirty #191
Hardware name: Generic DT based system
Workqueue: events deferred_probe_work_func
[<c031229c>] (unwind_backtrace) from [<c030d5ac>] (show_stack+0x10/0x14)
[<c030d5ac>] (show_stack) from [<c0ac134c>] (dump_stack+0x78/0x8c)
[<c0ac134c>] (dump_stack) from [<c0321660>] (__warn.part.3+0xb8/0xd4)
[<c0321660>] (__warn.part.3) from [<c03216e0>] (warn_slowpath_fmt+0x64/0x88)
[<c03216e0>] (warn_slowpath_fmt) from [<c0761a0c>] (drm_atomic_helper_wait_for_vblanks.part.1+0x288/0x290)
[<c0761a0c>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c07b0a98>] (mdp5_complete_commit+0x14/0x40)
[<c07b0a98>] (mdp5_complete_commit) from [<c07ddb80>] (msm_atomic_commit_tail+0xa8/0x140)
[<c07ddb80>] (msm_atomic_commit_tail) from [<c0763304>] (commit_tail+0x40/0x6c)
[<c07633f4>] (drm_atomic_helper_commit) from [<c07667f0>] (restore_fbdev_mode_atomic+0x168/0x1d4)
....
I can get the text console to work with a 4.17 kernel with this patch
https://patchwork.kernel.org/patch/10321845/ plus about a dozen or more
other patches that have been mainlined since that release.
I'm new to the DRM subsystem and continuing to dig into the issue,
however I'd appreciate any suggestions. I suspect the issue lies
somewhere in the second patch in this series.
Changes since v1:
- Shortened problem description above. I'll reply to this email and send
a full dmesg with the boot log with debugging turned on.
- Dropped patch 'fix null pointer dereference in
msm_atomic_prepare_fb()'
- New patch: Remove resv fields from msm_gem_object struct that was
incorrectly being referenced by the prepare_fb callbacks.
- Add drm_plane_enable_fb_damage_clips() to plane init for mdp4, mdp5,
and dpu1.
- Add Linus Walleij's reviewed-by to patches 3-6
Brian Masney (6):
drm: msm: remove resv fields from msm_gem_object struct
drm: msm: add dirty framebuffer helper
ARM: qcom_defconfig: add display-related options
ARM: dts: msm8974: add display support
ARM: dts: qcom: msm8974-hammerhead: add support for backlight
ARM: dts: qcom: msm8974-hammerhead: add support for display
.../qcom-msm8974-lge-nexus5-hammerhead.dts | 79 +++++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 132 ++++++++++++++++++
arch/arm/configs/qcom_defconfig | 5 +
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 7 +-
drivers/gpu/drm/msm/disp/mdp4/mdp4_plane.c | 3 +
drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c | 3 +
drivers/gpu/drm/msm/msm_atomic.c | 4 +-
drivers/gpu/drm/msm/msm_fb.c | 2 +
drivers/gpu/drm/msm/msm_gem.c | 3 -
drivers/gpu/drm/msm/msm_gem.h | 4 -
10 files changed, 229 insertions(+), 13 deletions(-)
--
2.20.1
Powered by blists - more mailing lists