| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHLCerOsQVHhFfkDX-+dJ9SZjUzW64+B85S6cLMHjqhRBoW1vw@mail.gmail.com>
Date: Fri, 10 May 2019 17:02:34 +0530
From: Amit Kucheria <amit.kucheria@...durent.com>
To: "Raju P.L.S.S.S.N" <rplsssn@...eaurora.org>, mkshah@...eaurora.org
Cc: Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
"open list:ARM/QUALCOMM SUPPORT" <linux-soc@...r.kernel.org>,
Rajendra Nayak <rnayak@...eaurora.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
LKML <linux-kernel@...r.kernel.org>,
Linux PM list <linux-pm@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, Stephen Boyd <sboyd@...nel.org>,
evgreen@...omium.org, Douglas Anderson <dianders@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>, ilina@...eaurora.org
Subject: Re: [PATCH v2] arm64: dts: sdm845: Add PSCI cpuidle low power states
On Wed, May 8, 2019 at 3:50 AM Amit Kucheria
<amit.kucheria@...durent.com> wrote:
>
> On Tue, Oct 30, 2018 at 10:53 PM Raju P.L.S.S.S.N
> <rplsssn@...eaurora.org> wrote:
> >
> > Add device bindings for cpuidle states for cpu devices.
>
> Raju: Did this patch fall through the cracks? It would be nice to land
> this while Lina works on setting up the infrastructure to do
> hierarchical power domains.
After talking offline with Raju, I've added this patch with some
cleanups to my qcom cpuidle series.
> > Cc: <devicetree@...r.kernel.org>
> > Signed-off-by: Raju P.L.S.S.S.N <rplsssn@...eaurora.org>
> > ---
> > Changes in v2
> > - Address comments from Doug
> > ---
> > ---
> > arch/arm64/boot/dts/qcom/sdm845.dtsi | 62 ++++++++++++++++++++++++++++++++++++
> > 1 file changed, 62 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > index 0c9a2aa..3a8381e 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -96,6 +96,7 @@
> > reg = <0x0 0x0>;
> > enable-method = "psci";
> > next-level-cache = <&L2_0>;
> > + cpu-idle-states = <&C0_CPU_PD &C0_CPU_RPD &CLUSTER_PD>;
>
> May I suggest using more generic names here instead of C0_CPU_PD and
> move the QC-specific description to the idle-state-name property? C0
> and C4 isn't easy to understand at a glance. Neither is PD and RPD.
>
> Something like big_cpu_retention, big_cpu_sleep, little_cpu_retention,
> little_cpu_sleep, cluster_sleep?
> Or big_cpu_idle_0, big_cpu_idle_1, big_cpu_idle_2 for states with
> increasing breakeven times.
>
> I've commented below on what it might look like.
>
> > L2_0: l2-cache {
> > compatible = "cache";
> > next-level-cache = <&L3_0>;
> > @@ -111,6 +112,7 @@
> > reg = <0x0 0x100>;
> > enable-method = "psci";
> > next-level-cache = <&L2_100>;
> > + cpu-idle-states = <&C0_CPU_PD &C0_CPU_RPD &CLUSTER_PD>;
> > L2_100: l2-cache {
> > compatible = "cache";
> > next-level-cache = <&L3_0>;
> > @@ -123,6 +125,7 @@
> > reg = <0x0 0x200>;
> > enable-method = "psci";
> > next-level-cache = <&L2_200>;
> > + cpu-idle-states = <&C0_CPU_PD &C0_CPU_RPD &CLUSTER_PD>;
> > L2_200: l2-cache {
> > compatible = "cache";
> > next-level-cache = <&L3_0>;
> > @@ -135,6 +138,7 @@
> > reg = <0x0 0x300>;
> > enable-method = "psci";
> > next-level-cache = <&L2_300>;
> > + cpu-idle-states = <&C0_CPU_PD &C0_CPU_RPD &CLUSTER_PD>;
> > L2_300: l2-cache {
> > compatible = "cache";
> > next-level-cache = <&L3_0>;
> > @@ -147,6 +151,7 @@
> > reg = <0x0 0x400>;
> > enable-method = "psci";
> > next-level-cache = <&L2_400>;
> > + cpu-idle-states = <&C4_CPU_PD &C4_CPU_RPD &CLUSTER_PD>;
> > L2_400: l2-cache {
> > compatible = "cache";
> > next-level-cache = <&L3_0>;
> > @@ -159,6 +164,7 @@
> > reg = <0x0 0x500>;
> > enable-method = "psci";
> > next-level-cache = <&L2_500>;
> > + cpu-idle-states = <&C4_CPU_PD &C4_CPU_RPD &CLUSTER_PD>;
> > L2_500: l2-cache {
> > compatible = "cache";
> > next-level-cache = <&L3_0>;
> > @@ -171,6 +177,7 @@
> > reg = <0x0 0x600>;
> > enable-method = "psci";
> > next-level-cache = <&L2_600>;
> > + cpu-idle-states = <&C4_CPU_PD &C4_CPU_RPD &CLUSTER_PD>;
> > L2_600: l2-cache {
> > compatible = "cache";
> > next-level-cache = <&L3_0>;
> > @@ -183,11 +190,66 @@
> > reg = <0x0 0x700>;
> > enable-method = "psci";
> > next-level-cache = <&L2_700>;
> > + cpu-idle-states = <&C4_CPU_PD &C4_CPU_RPD &CLUSTER_PD>;
> > L2_700: l2-cache {
> > compatible = "cache";
> > next-level-cache = <&L3_0>;
> > };
> > };
> > +
> > + idle-states {
> > + entry-method = "psci";
> > +
> > + C0_CPU_PD: c0-power-down {
>
> big_cpu_retention: big-cpu-retention
>
> > + compatible = "arm,idle-state";
> > + arm,psci-suspend-param = <0x40000003>;
> > + entry-latency-us = <350>;
> > + exit-latency-us = <461>;
> > + min-residency-us = <1890>;
> > + local-timer-stop;
> > + idle-state-name = "power-down";
>
> "big-cpu-power-down"
>
> > + };
> > +
> > + C0_CPU_RPD: c0-rail-power-down {
>
> big_cpu_sleep: big-cpu-sleep
>
> > + compatible = "arm,idle-state";
> > + arm,psci-suspend-param = <0x40000004>;
> > + entry-latency-us = <360>;
> > + exit-latency-us = <531>;
> > + min-residency-us = <3934>;
> > + local-timer-stop;
> > + idle-state-name = "rail-power-down";
>
> "big-cpu-rail-power-down"
>
> > + };
> > +
> > + C4_CPU_PD: c4-power-down {
>
> little_cpu_retention: little-cpu-retention
>
> > + compatible = "arm,idle-state";
> > + arm,psci-suspend-param = <0x40000003>;
> > + entry-latency-us = <264>;
> > + exit-latency-us = <621>;
> > + min-residency-us = <952>;
> > + local-timer-stop;
> > + idle-state-name = "power-down";
>
> "little-cpu-power-down" and so and so forth. You get the idea.
>
> > + };
> > +
> > + C4_CPU_RPD: c4-rail-power-down {
> > + compatible = "arm,idle-state";
> > + arm,psci-suspend-param = <0x40000004>;
> > + entry-latency-us = <702>;
> > + exit-latency-us = <1061>;
> > + min-residency-us = <4488>;
> > + local-timer-stop;
> > + idle-state-name = "rail-power-down";
> > + };
> > +
> > + CLUSTER_PD: cluster-power-down {
> > + compatible = "arm,idle-state";
> > + arm,psci-suspend-param = <0x400000F4>;
> > + entry-latency-us = <3263>;
> > + exit-latency-us = <6562>;
> > + min-residency-us = <9987>;
> > + local-timer-stop;
> > + idle-state-name = "cluster-power-down";
> > + };
> > + };
> > };
> >
> > pmu {
> > --
> > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> > of the Code Aurora Forum, hosted by The Linux Foundation.
> >
Powered by blists - more mailing lists