[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <86sgtmchow.wl-marc.zyngier@arm.com>
Date: Fri, 10 May 2019 19:01:19 +0100
From: Marc Zyngier <marc.zyngier@....com>
To: Guo Ren <guoren@...nel.org>
Cc: tglx@...utronix.de, robh+dt@...nel.org,
linux-kernel@...r.kernel.org, Guo Ren <ren_guo@...ky.com>
Subject: Re: [PATCH V2 5/7] dt-bindings: interrupt-controller: Update csky mpintc
On Fri, 10 May 2019 09:57:54 +0100,
Guo Ren <guoren@...nel.org> wrote:
>
> Thx Marc,
>
> On Mon, Feb 18, 2019 at 02:28:45PM +0000, Marc Zyngier wrote:
> > On Mon, 18 Feb 2019 10:04:41 +0800
> > guoren@...nel.org wrote:
> >
> > > From: Guo Ren <ren_guo@...ky.com>
> > >
> > > Add trigger type and priority setting for csky,mpintc.
> > >
> > > Changelog:
> > > - change #interrupt-cells to <3>
> > >
> > > Signed-off-by: Guo Ren <ren_guo@...ky.com>
> > > Cc: Marc Zyngier <marc.zyngier@....com>
> > > Cc: Rob Herring <robh+dt@...nel.org>
> > > ---
> > > .../bindings/interrupt-controller/csky,mpintc.txt | 21 +++++++++++++++++----
> > > 1 file changed, 17 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> > > index ab921f1..dccd913 100644
> > > --- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> > > +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> > > @@ -6,11 +6,18 @@ C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
> > > SMP soc, and it also could be used in non-SMP system.
> > >
> > > Interrupt number definition:
> > > -
> > > 0-15 : software irq, and we use 15 as our IPI_IRQ.
> > > 16-31 : private irq, and we use 16 as the co-processor timer.
> > > 31-1024: common irq for soc ip.
> > >
> > > +Interrupt triger mode:
> > > + IRQ_TYPE_LEVEL_HIGH (default)
> > > + IRQ_TYPE_LEVEL_LOW
> > > + IRQ_TYPE_EDGE_RISING
> > > + IRQ_TYPE_EDGE_FALLING
> > > +
> > > +Interrupt priority range: 0-255
> > > +
> > > =============================
> > > intc node bindings definition
> > > =============================
> > > @@ -26,15 +33,21 @@ intc node bindings definition
> > > - #interrupt-cells
> > > Usage: required
> > > Value type: <u32>
> > > - Definition: must be <1>
> > > + Definition: <3>
> >
> > This seem to be invalidating all existing DTs. Is this an acceptable
> > thing to do? It will require an Ack from a DT maintainer.
> There is no DTs upstreamed and current implementation of driver could
> support old format which isn't mentioned here. We just give a complete
> format here.
It would be good to mention it anyway, if only for people to
understand what is happening with this changing binding.
Thanks,
M.
--
Jazz is not dead, it just smell funny.
Powered by blists - more mailing lists