[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190511110932.75b2b186@archlinux>
Date: Sat, 11 May 2019 11:09:32 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Philippe Schenker <dev@...henker.ch>
Cc: linux-iio@...r.kernel.org, Stefan Agner <stefan@...er.ch>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
David Laight <David.Laight@...LAB.COM>,
Philippe Schenker <philippe.schenker@...adex.com>,
Max Krummenacher <max.krummenacher@...adex.com>,
Alexandre Torgue <alexandre.torgue@...com>,
linux-kernel@...r.kernel.org, Lee Jones <lee.jones@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 3/5] iio: stmpe-adc: Enable all stmpe-adc interrupts
just once
On Tue, 7 May 2019 16:36:13 +0200
Philippe Schenker <dev@...henker.ch> wrote:
> From: Philippe Schenker <philippe.schenker@...adex.com>
>
> This commit will enable the interrupts of all channels handled by this
> driver only once in the probe function.
>
> This will improve performance because one byte less has to be written over
> i2c on each read out of the adc. On the fastest ADC mode this will improve
> read out speed by 15%.
>
> Signed-off-by: Philippe Schenker <philippe.schenker@...adex.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.
Thanks,
Jonathan
> ---
>
> drivers/iio/adc/stmpe-adc.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
> index b3872eb37293..82b43e4522b6 100644
> --- a/drivers/iio/adc/stmpe-adc.c
> +++ b/drivers/iio/adc/stmpe-adc.c
> @@ -74,9 +74,6 @@ static int stmpe_read_voltage(struct stmpe_adc *info,
> return -EINVAL;
> }
>
> - stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN,
> - STMPE_ADC_CH(info->channel));
> -
> stmpe_reg_write(info->stmpe, STMPE_REG_ADC_CAPT,
> STMPE_ADC_CH(info->channel));
>
> @@ -336,6 +333,9 @@ static int stmpe_adc_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN,
> + ~(norequest_mask & 0xFF));
> +
> return devm_iio_device_register(&pdev->dev, indio_dev);
> }
>
Powered by blists - more mailing lists