[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190512082614.9045-4-tiny.windzz@gmail.com>
Date: Sun, 12 May 2019 04:26:14 -0400
From: Yangtao Li <tiny.windzz@...il.com>
To: tiny.windzz@...il.com, rui.zhang@...el.com, edubezval@...il.com,
daniel.lezcano@...aro.org, robh+dt@...nel.org,
mark.rutland@....com, maxime.ripard@...tlin.com, wens@...e.org,
catalin.marinas@....com, will.deacon@....com, davem@...emloft.net,
mchehab+samsung@...nel.org, gregkh@...uxfoundation.org,
Jonathan.Cameron@...wei.com, nicolas.ferre@...rochip.com,
paulmck@...ux.ibm.com, andy.gross@...aro.org, olof@...om.net,
bjorn.andersson@...aro.org, jagan@...rulasolutions.com,
marc.w.gonzalez@...e.fr, stefan.wahren@...e.com,
enric.balletbo@...labora.com
Cc: linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 3/3] dt-bindings: thermal: add binding document for h6 thermal controller
This patch adds binding document for allwinner h6 thermal controller.
Signed-off-by: Yangtao Li <tiny.windzz@...il.com>
---
.../bindings/thermal/sun50i-thermal.txt | 32 +++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/sun50i-thermal.txt
diff --git a/Documentation/devicetree/bindings/thermal/sun50i-thermal.txt b/Documentation/devicetree/bindings/thermal/sun50i-thermal.txt
new file mode 100644
index 000000000000..67eda7794262
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/sun50i-thermal.txt
@@ -0,0 +1,32 @@
+Binding for Thermal Sensor of Allwinner SOC.
+
+This describes the device tree binding for the Allwinner thermal controller
+which measures the on-SoC temperatures.
+
+Required properties:
+- compatible:
+ - "allwinner,sun50i-h6-ths" : For H6
+- reg: Address range of the thermal controller
+- clocks, clock-names: Clocks needed for the thermal controller.
+ The required clocks for h6 are: "bus".
+- resets, reset-names: Reference to the reset controller controlling
+ the thermal controller.
+- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
+ unspecified default values shall be used.
+- nvmem-cell-names: Should be "calib"
+- #thermal-sensor-cells : For H6 Should be 1.
+ See ./thermal.txt for a description.
+
+Example:
+
+ ths: ths@...5000 {
+ compatible = "allwinner,sun50i-h6-ths";
+ reg = <0x05070400 0x100>;
+ clocks = <&ccu CLK_BUS_THS>;
+ clock-names = "bus";
+ resets = <&ccu RST_BUS_THS>;
+ reset-names = "bus";
+ nvmem-cells = <&tsen_calib>;
+ nvmem-cell-names = "calib";
+ #thermal-sensor-cells = <1>;
+ };
--
2.17.0
Powered by blists - more mailing lists