[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1557739890.3997.1.camel@pengutronix.de>
Date: Mon, 13 May 2019 11:31:30 +0200
From: Lucas Stach <l.stach@...gutronix.de>
To: Robin Gong <yibin.gong@....com>,
"robh@...nel.org" <robh@...nel.org>,
"broonie@...nel.org" <broonie@...nel.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>,
"mark.rutland@....com" <mark.rutland@....com>,
"u.kleine-koenig@...gutronix.de" <u.kleine-koenig@...gutronix.de>,
"plyatov@...il.com" <plyatov@...il.com>,
"vkoul@...nel.org" <vkoul@...nel.org>,
"dan.j.williams@...el.com" <dan.j.williams@...el.com>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"will.deacon@....com" <will.deacon@....com>
Cc: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-spi@...r.kernel.org" <linux-spi@...r.kernel.org>,
dl-linux-imx <linux-imx@....com>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"dmaengine@...r.kernel.org" <dmaengine@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v3 00/14] add ecspi ERR009165 for i.mx6/7 soc family
Hi Robin,
Am Dienstag, den 07.05.2019, 09:15 +0000 schrieb Robin Gong:
> There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> transfer to be send twice in DMA mode. Please get more information from:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
> new sdma ram script which works in XCH mode as PIO inside sdma instead
> of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be
> exist on all legacy i.mx6/7 soc family before i.mx6ul.
> NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/
> 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips
> still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
> for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata
> or not.
> The first two reverted patches should be the same issue, though, it
> seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
> have the chance to test this patch set if could fix their issues.
> Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
> on i.mx8mm because the event id is zero.
>
> PS:
> Please get sdma firmware from below linux-firmware and copy it to your
> local rootfs /lib/firmware/imx/sdma.
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma
This series is unfit for merging, as long as it depends on a SDMA RAM
script that is known to break serial DMA. When can we expect to get a
firmware version with the broken serial script removed out into the
public?
Regards,
Lucas
> v2:
> 1. add commit log for reverted patches.
> 2. add comment for 'ecspi_fixed' in sdma driver.
> 3. add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
> rather than remove.
> v3:
> 1. confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull
> /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips.
> Correct dts related dts patch in v2.
> 2. clean eratta information in binding doc and new 'tx_glitch_fixed' flag
> in spi-imx driver to state ERR009165 fixed or not.
> 3. Enlarge burst size to fifo size for tx since tx_wml set to 0 in the
> errata workaroud, thus improve performance as possible.
>
> Robin Gong (14):
> Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
> Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
> Revert "dmaengine: imx-sdma: refine to load context only once"
> dmaengine: imx-sdma: remove dupilicated sdma_load_context
> dmaengine: imx-sdma: add mcu_2_ecspi script
> spi: imx: fix ERR009165
> spi: imx: remove ERR009165 workaround on i.mx6ul
> dt-bindings: spi: imx: add new i.mx6ul compatible name
> dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
> dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
> dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
> ARM: dts: imx6ul: add dma support on ecspi
> ARM: dts: imx6sll: correct sdma compatible
> arm64: defconfig: Enable SDMA on i.mx8mq/8mm
>
> .../devicetree/bindings/dma/fsl-imx-sdma.txt | 2 +
> .../devicetree/bindings/spi/fsl-imx-cspi.txt | 1 +
> arch/arm/boot/dts/imx6q.dtsi | 2 +-
> arch/arm/boot/dts/imx6qdl.dtsi | 8 +--
> arch/arm/boot/dts/imx6sll.dtsi | 2 +-
> arch/arm/boot/dts/imx6ul.dtsi | 8 +++
> arch/arm64/configs/defconfig | 3 +
> drivers/dma/imx-sdma.c | 78 ++++++++++++++++------
> drivers/spi/spi-imx.c | 61 ++++++++++++++---
> include/linux/platform_data/dma-imx-sdma.h | 1 +
> 10 files changed, 132 insertions(+), 34 deletions(-)
>
> --
> 2.7.4
>
Powered by blists - more mailing lists