[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <317f94d6-846f-92e2-bd0f-b44377ea7845@st.com>
Date: Mon, 13 May 2019 14:45:58 +0000
From: Philippe CORNU <philippe.cornu@...com>
To: Yannick FERTRE <yannick.fertre@...com>,
Benjamin GAIGNARD <benjamin.gaignard@...com>,
Vincent ABRIOU <vincent.abriou@...com>,
"David Airlie" <airlied@...ux.ie>, Daniel Vetter <daniel@...ll.ch>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre TORGUE <alexandre.torgue@...com>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"linux-stm32@...md-mailman.stormreply.com"
<linux-stm32@...md-mailman.stormreply.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] drm/stm: ltdc: remove clk_round_rate comment
Dear Yannick,
Acked-by: Philippe Cornu <philippe.cornu@...com>
Thank you,
Philippe :-)
On 5/13/19 3:15 PM, Yannick Fertré wrote:
> Clk_round_rate returns rounded clock without changing
> the hardware in any way.
> This function couldn't replace set_rate/get_rate calls.
> Todo comment has been removed & a new log inserted.
>
> Signed-off-by: Yannick Fertré <yannick.fertre@...com>
> ---
> Changes in v2:
> - Clk_enable & clk_disable are needed for the SOC STM32F7
> (not for STM32MP1). I return this part of the patch to make sure the
> driver is compatible with all SOC STM32.
>
> drivers/gpu/drm/stm/ltdc.c | 8 +++-----
> 1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> index 97912e2..1104e78 100644
> --- a/drivers/gpu/drm/stm/ltdc.c
> +++ b/drivers/gpu/drm/stm/ltdc.c
> @@ -507,11 +507,6 @@ static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc,
> struct ltdc_device *ldev = crtc_to_ltdc(crtc);
> int rate = mode->clock * 1000;
>
> - /*
> - * TODO clk_round_rate() does not work yet. When ready, it can
> - * be used instead of clk_set_rate() then clk_get_rate().
> - */
> -
> clk_disable(ldev->pixel_clk);
> if (clk_set_rate(ldev->pixel_clk, rate) < 0) {
> DRM_ERROR("Cannot set rate (%dHz) for pixel clk\n", rate);
> @@ -521,6 +516,9 @@ static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc,
>
> adjusted_mode->clock = clk_get_rate(ldev->pixel_clk) / 1000;
>
> + DRM_DEBUG_DRIVER("requested clock %dkHz, adjusted clock %dkHz\n",
> + mode->clock, adjusted_mode->clock);
> +
> return true;
> }
>
> --
> 2.7.4
>
Powered by blists - more mailing lists