Message-ID: <20190513120154.78a58a91@coco.lan>
Date:   Mon, 13 May 2019 12:01:54 -0300
From:   Mauro Carvalho Chehab <mchehab+samsung@...nel.org>
To:     Changbin Du <changbin.du@...il.com>
Cc:     bhelgaas@...gle.com, corbet@....net, linux-pci@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 09/12] Documentation: PCI: convert
 endpoint/pci-endpoint.txt to reST

Em Mon, 13 May 2019 22:19:57 +0800
Changbin Du <changbin.du@...il.com> escreveu:

> This converts the plain text documentation to reStructuredText format and
> add it to Sphinx TOC tree. No essential content change.
> 
> Signed-off-by: Changbin Du <changbin.du@...il.com>
> Acked-by: Bjorn Helgaas <bhelgaas@...gle.com>
> ---
>  Documentation/PCI/endpoint/index.rst          | 10 ++
>  .../{pci-endpoint.txt => pci-endpoint.rst}    | 96 +++++++++++--------
>  Documentation/PCI/index.rst                   |  1 +
>  3 files changed, 69 insertions(+), 38 deletions(-)
>  create mode 100644 Documentation/PCI/endpoint/index.rst
>  rename Documentation/PCI/endpoint/{pci-endpoint.txt => pci-endpoint.rst} (82%)
> 
> diff --git a/Documentation/PCI/endpoint/index.rst b/Documentation/PCI/endpoint/index.rst
> new file mode 100644
> index 000000000000..0db4f2fcd7f0
> --- /dev/null
> +++ b/Documentation/PCI/endpoint/index.rst
> @@ -0,0 +1,10 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +======================
> +PCI Endpoint Framework
> +======================
> +
> +.. toctree::
> +   :maxdepth: 2
> +
> +   pci-endpoint
> diff --git a/Documentation/PCI/endpoint/pci-endpoint.txt b/Documentation/PCI/endpoint/pci-endpoint.rst
> similarity index 82%
> rename from Documentation/PCI/endpoint/pci-endpoint.txt
> rename to Documentation/PCI/endpoint/pci-endpoint.rst
> index e86a96b66a6a..693f3a2ad7a4 100644
> --- a/Documentation/PCI/endpoint/pci-endpoint.txt
> +++ b/Documentation/PCI/endpoint/pci-endpoint.rst
> @@ -1,11 +1,17 @@
> -			    PCI ENDPOINT FRAMEWORK
> -		    Kishon Vijay Abraham I <kishon@...com>
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +======================
> +PCI Endpoint Framework
> +======================

This will create a chapter called: "PCI Endpoint Framework" inside a
section named "PCI Endpoint Framework". This is redundant.

Just remove the title here keeping it only at the index file.

With such change:
	Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>

> +
> +:Author: Kishon Vijay Abraham I <kishon@...com>
>  
>  This document is a guide to use the PCI Endpoint Framework in order to create
>  endpoint controller driver, endpoint function driver, and using configfs
>  interface to bind the function driver to the controller driver.
>  
> -1. Introduction
> +Introduction
> +============
>  
>  Linux has a comprehensive PCI subsystem to support PCI controllers that
>  operates in Root Complex mode. The subsystem has capability to scan PCI bus,
> @@ -19,26 +25,30 @@ add endpoint mode support in Linux. This will help to run Linux in an
>  EP system which can have a wide variety of use cases from testing or
>  validation, co-processor accelerator, etc.
>  
> -2. PCI Endpoint Core
> +PCI Endpoint Core
> +=================
>  
>  The PCI Endpoint Core layer comprises 3 components: the Endpoint Controller
>  library, the Endpoint Function library, and the configfs layer to bind the
>  endpoint function with the endpoint controller.
>  
> -2.1 PCI Endpoint Controller(EPC) Library
> +PCI Endpoint Controller(EPC) Library
> +------------------------------------
>  
>  The EPC library provides APIs to be used by the controller that can operate
>  in endpoint mode. It also provides APIs to be used by function driver/library
>  in order to implement a particular endpoint function.
>  
> -2.1.1 APIs for the PCI controller Driver
> +APIs for the PCI controller Driver
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  
>  This section lists the APIs that the PCI Endpoint core provides to be used
>  by the PCI controller driver.
>  
> -*) devm_pci_epc_create()/pci_epc_create()
> +* devm_pci_epc_create()/pci_epc_create()
>  
>     The PCI controller driver should implement the following ops:
> +
>  	 * write_header: ops to populate configuration space header
>  	 * set_bar: ops to configure the BAR
>  	 * clear_bar: ops to reset the BAR
> @@ -51,110 +61,116 @@ by the PCI controller driver.
>     The PCI controller driver can then create a new EPC device by invoking
>     devm_pci_epc_create()/pci_epc_create().
>  
> -*) devm_pci_epc_destroy()/pci_epc_destroy()
> +* devm_pci_epc_destroy()/pci_epc_destroy()
>  
>     The PCI controller driver can destroy the EPC device created by either
>     devm_pci_epc_create() or pci_epc_create() using devm_pci_epc_destroy() or
>     pci_epc_destroy().
>  
> -*) pci_epc_linkup()
> +* pci_epc_linkup()
>  
>     In order to notify all the function devices that the EPC device to which
>     they are linked has established a link with the host, the PCI controller
>     driver should invoke pci_epc_linkup().
>  
> -*) pci_epc_mem_init()
> +* pci_epc_mem_init()
>  
>     Initialize the pci_epc_mem structure used for allocating EPC addr space.
>  
> -*) pci_epc_mem_exit()
> +* pci_epc_mem_exit()
>  
>     Cleanup the pci_epc_mem structure allocated during pci_epc_mem_init().
>  
> -2.1.2 APIs for the PCI Endpoint Function Driver
> +
> +APIs for the PCI Endpoint Function Driver
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  
>  This section lists the APIs that the PCI Endpoint core provides to be used
>  by the PCI endpoint function driver.
>  
> -*) pci_epc_write_header()
> +* pci_epc_write_header()
>  
>     The PCI endpoint function driver should use pci_epc_write_header() to
>     write the standard configuration header to the endpoint controller.
>  
> -*) pci_epc_set_bar()
> +* pci_epc_set_bar()
>  
>     The PCI endpoint function driver should use pci_epc_set_bar() to configure
>     the Base Address Register in order for the host to assign PCI addr space.
>     Register space of the function driver is usually configured
>     using this API.
>  
> -*) pci_epc_clear_bar()
> +* pci_epc_clear_bar()
>  
>     The PCI endpoint function driver should use pci_epc_clear_bar() to reset
>     the BAR.
>  
> -*) pci_epc_raise_irq()
> +* pci_epc_raise_irq()
>  
>     The PCI endpoint function driver should use pci_epc_raise_irq() to raise
>     Legacy Interrupt, MSI or MSI-X Interrupt.
>  
> -*) pci_epc_mem_alloc_addr()
> +* pci_epc_mem_alloc_addr()
>  
>     The PCI endpoint function driver should use pci_epc_mem_alloc_addr(), to
>     allocate memory address from EPC addr space which is required to access
>     RC's buffer
>  
> -*) pci_epc_mem_free_addr()
> +* pci_epc_mem_free_addr()
>  
>     The PCI endpoint function driver should use pci_epc_mem_free_addr() to
>     free the memory space allocated using pci_epc_mem_alloc_addr().
>  
> -2.1.3 Other APIs
> +Other APIs
> +~~~~~~~~~~
>  
>  There are other APIs provided by the EPC library. These are used for binding
>  the EPF device with EPC device. pci-ep-cfs.c can be used as reference for
>  using these APIs.
>  
> -*) pci_epc_get()
> +* pci_epc_get()
>  
>     Get a reference to the PCI endpoint controller based on the device name of
>     the controller.
>  
> -*) pci_epc_put()
> +* pci_epc_put()
>  
>     Release the reference to the PCI endpoint controller obtained using
>     pci_epc_get()
>  
> -*) pci_epc_add_epf()
> +* pci_epc_add_epf()
>  
>     Add a PCI endpoint function to a PCI endpoint controller. A PCIe device
>     can have up to 8 functions according to the specification.
>  
> -*) pci_epc_remove_epf()
> +* pci_epc_remove_epf()
>  
>     Remove the PCI endpoint function from PCI endpoint controller.
>  
> -*) pci_epc_start()
> +* pci_epc_start()
>  
>     The PCI endpoint function driver should invoke pci_epc_start() once it
>     has configured the endpoint function and wants to start the PCI link.
>  
> -*) pci_epc_stop()
> +* pci_epc_stop()
>  
>     The PCI endpoint function driver should invoke pci_epc_stop() to stop
>     the PCI LINK.
>  
> -2.2 PCI Endpoint Function(EPF) Library
> +
> +PCI Endpoint Function(EPF) Library
> +----------------------------------
>  
>  The EPF library provides APIs to be used by the function driver and the EPC
>  library to provide endpoint mode functionality.
>  
> -2.2.1 APIs for the PCI Endpoint Function Driver
> +APIs for the PCI Endpoint Function Driver
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  
>  This section lists the APIs that the PCI Endpoint core provides to be used
>  by the PCI endpoint function driver.
>  
> -*) pci_epf_register_driver()
> +* pci_epf_register_driver()
>  
>     The PCI Endpoint Function driver should implement the following ops:
>  	 * bind: ops to perform when a EPC device has been bound to EPF device
> @@ -166,50 +182,54 @@ by the PCI endpoint function driver.
>    The PCI Function driver can then register the PCI EPF driver by using
>    pci_epf_register_driver().
>  
> -*) pci_epf_unregister_driver()
> +* pci_epf_unregister_driver()
>  
>    The PCI Function driver can unregister the PCI EPF driver by using
>    pci_epf_unregister_driver().
>  
> -*) pci_epf_alloc_space()
> +* pci_epf_alloc_space()
>  
>    The PCI Function driver can allocate space for a particular BAR using
>    pci_epf_alloc_space().
>  
> -*) pci_epf_free_space()
> +* pci_epf_free_space()
>  
>    The PCI Function driver can free the allocated space
>    (using pci_epf_alloc_space) by invoking pci_epf_free_space().
>  
> -2.2.2 APIs for the PCI Endpoint Controller Library
> +APIs for the PCI Endpoint Controller Library
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
>  This section lists the APIs that the PCI Endpoint core provides to be used
>  by the PCI endpoint controller library.
>  
> -*) pci_epf_linkup()
> +* pci_epf_linkup()
>  
>     The PCI endpoint controller library invokes pci_epf_linkup() when the
>     EPC device has established the connection to the host.
>  
> -2.2.2 Other APIs
> +Other APIs
> +~~~~~~~~~~
> +
>  There are other APIs provided by the EPF library. These are used to notify
>  the function driver when the EPF device is bound to the EPC device.
>  pci-ep-cfs.c can be used as reference for using these APIs.
>  
> -*) pci_epf_create()
> +* pci_epf_create()
>  
>     Create a new PCI EPF device by passing the name of the PCI EPF device.
>     This name will be used to bind the the EPF device to a EPF driver.
>  
> -*) pci_epf_destroy()
> +* pci_epf_destroy()
>  
>     Destroy the created PCI EPF device.
>  
> -*) pci_epf_bind()
> +* pci_epf_bind()
>  
>     pci_epf_bind() should be invoked when the EPF device has been bound to
>     a EPC device.
>  
> -*) pci_epf_unbind()
> +* pci_epf_unbind()
>  
>     pci_epf_unbind() should be invoked when the binding between EPC device
>     and EPF device is lost.
> diff --git a/Documentation/PCI/index.rst b/Documentation/PCI/index.rst
> index f54b65b1ca5f..f4c6121868c3 100644
> --- a/Documentation/PCI/index.rst
> +++ b/Documentation/PCI/index.rst
> @@ -15,3 +15,4 @@ Linux PCI Bus Subsystem
>     acpi-info
>     pci-error-recovery
>     pcieaer-howto
> +   endpoint/index



Thanks,
Mauro

Powered by blists - more mailing lists