linux-kernel - Re: [PATCHv4 1/2] dt-bindings: cadence-quadspi: add options reset property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190513152809.GA28897@bogus>
Date:   Mon, 13 May 2019 10:28:09 -0500
From:   Rob Herring <robh@...nel.org>
To:     Dinh Nguyen <dinguyen@...nel.org>
Cc:     linux-mtd@...ts.infradead.org, marex@...x.de,
        tudor.ambarus@...rochip.com, dwmw2@...radead.org,
        computersforpeace@...il.com, bbrezillon@...nel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCHv4 1/2] dt-bindings: cadence-quadspi: add options reset
 property

On Wed, May 08, 2019 at 08:43:37AM -0500, Dinh Nguyen wrote:
> The QSPI module can have an optional reset signals that will hold the
> module in a reset state.
> 
> Signed-off-by: Dinh Nguyen <dinguyen@...nel.org>
> ---
> v4: no change
> v3: created base on review comments
> v2: did not exist
> v1: did not exist
> ---
>  Documentation/devicetree/bindings/mtd/cadence-quadspi.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
> index 4345c3a6f530..b6264323a03c 100644
> --- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
> +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
> @@ -35,6 +35,8 @@ custom properties:
>  		  (qspi_n_ss_out).
>  - cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low
>                    and first bit transfer.
> +- resets	: Must contain an entry for each entry in reset-names.
> +		  See ../reset/reset.txt for details.

reset-names needs to be documented with the values and order.

>  
>  Example:
>  
> @@ -50,6 +52,8 @@ Example:
>  		cdns,fifo-depth = <128>;
>  		cdns,fifo-width = <4>;
>  		cdns,trigger-address = <0x00000000>;
> +		resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
> +		reset-names = "qspi", "qspi-ocp";
>  
>  		flash0: n25q00@0 {
>  			...
> -- 
> 2.20.0
>