[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190514094537.8765-1-jbrunet@baylibre.com>
Date: Tue, 14 May 2019 11:45:37 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Kevin Hilman <khilman@...libre.com>
Cc: Jerome Brunet <jbrunet@...libre.com>, devicetree@...r.kernel.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: meson: g12a: set uart_ao clocks
Now that the AO clock controller is available, make the uarts of the
always-on domain claim the appropriate peripheral clock.
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index b2f08fc96568..ca01064a771a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -708,7 +708,7 @@
"amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
@@ -718,7 +718,7 @@
"amlogic,meson-ao-uart";
reg = <0x0 0x4000 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
--
2.20.1
Powered by blists - more mailing lists