linux-kernel - [PATCH 0/2] drm/sun4i: Fix sun8i HDMI PHY initialization

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 14 May 2019 22:43:35 +0200
From:   Jernej Skrabec <jernej.skrabec@...l.net>
To:     maxime.ripard@...tlin.com, wens@...e.org
Cc:     airlied@...ux.ie, daniel@...ll.ch, dri-devel@...ts.freedesktop.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-sunxi@...glegroups.com
Subject: [PATCH 0/2] drm/sun4i: Fix sun8i HDMI PHY initialization

I received a report that 4K resolution doesn't work if U-Boot video
driver is disabled. It turns out that HDMI PHY clock driver was
initialized prematurely, before reset line was deasserted and clocks
enabled. U-Boot video driver masked the issue because it set pixel
clock correctly.

In the process of researching the bug, I also found out that few bits
in HDMI PHY registers were not set correctly. While there is no
noticeable change (4K resolution works with both settings), I've
added fix anyway, to be conformant with vendor documentation.

Please check it out.

Best regards,
Jernej

Jernej Skrabec (2):
  drm/sun4i: Fix sun8i HDMI PHY clock initialization
  drm/sun4i: Fix sun8i HDMI PHY configuration for > 148.5 MHz

 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 29 ++++++++++++++------------
 1 file changed, 16 insertions(+), 13 deletions(-)

-- 
2.21.0