linux-kernel - Re: [v1] drm/arm/mali-dp: Disable checking for required pixel clock rate

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3f87b2a7-c7e8-0597-2f62-d421aa6ccaa5@arm.com>
Date:   Wed, 15 May 2019 18:14:10 +0100
From:   Robin Murphy <robin.murphy@....com>
To:     Wen He <wen.he_1@....com>,
        "dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "liviu.dudau@....com" <liviu.dudau@....com>
Cc:     Leo Li <leoyang.li@....com>
Subject: Re: [v1] drm/arm/mali-dp: Disable checking for required pixel clock
 rate

On 15/05/2019 03:42, Wen He wrote:
> Disable checking for required pixel clock rate if ARCH_LAYERSCPAE
> is enable.
> 
> Signed-off-by: Alison Wang <alison.wang@....com>
> Signed-off-by: Wen He <wen.he_1@....com>
> ---
> change in description:
> 	- This check that only supported one pixel clock required clock rate
> 	compare with dts node value. but we have supports 4 pixel clock
> 	for ls1028a board.
>   drivers/gpu/drm/arm/malidp_crtc.c | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/gpu/drm/arm/malidp_crtc.c b/drivers/gpu/drm/arm/malidp_crtc.c
> index 56aad288666e..bb79223d9981 100644
> --- a/drivers/gpu/drm/arm/malidp_crtc.c
> +++ b/drivers/gpu/drm/arm/malidp_crtc.c
> @@ -36,11 +36,13 @@ static enum drm_mode_status malidp_crtc_mode_valid(struct drm_crtc *crtc,
>   
>   	if (req_rate) {
>   		rate = clk_round_rate(hwdev->pxlclk, req_rate);
> +#ifndef CONFIG_ARCH_LAYERSCAPE

What about multiplatform builds? The kernel config doesn't tell you what 
hardware you're actually running on.

Robin.

>   		if (rate != req_rate) {
>   			DRM_DEBUG_DRIVER("pxlclk doesn't support %ld Hz\n",
>   					 req_rate);
>   			return MODE_NOCLOCK;
>   		}
> +#endif
>   	}
>   
>   	return MODE_OK;
>